ADSP-2141L Data Sheet

REV. 0

Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties
which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Analog Devices.

ADSP-2141L

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700

World Wide Web Site: http://www.analog.com

Fax: 781/326-8703

© Analog Devices, Inc., 2000

DSP

APPLICATIONS
Security Coprocessor for High Speed Networking Prod-

ucts (Routers, Switches, Hubs)

Cryptographic Core for Firewalls, Hardware Encryptors,

and More

Crypto Peripheral for Implementing Secure NIC Adapt-

ers (10/100 Ethernet, Token Ring, ISDN)

Secure Modem-on-a-Chip (V.34, ADSL)

FEATURES
DES CRYPTO BLOCK
640 Mbps Sustained Performance--Single DES
214 Mbps Sustained Performance--Triple DES
Supports All Modes: ECB; CBC; 64-Bit OFB; and 1-, 8-,

64-Bit CFB. Includes Automatic Padding

Implements IPsec ESP Transforms Autonomously at

OC-3 (155 Mbps) Rates (3-DES, SHA-1)

HASH BLOCK
Hardware-Based SHA-1 and MD-5 Hashing
253 Mbps Sustained Performance--SHA-1
315 Mbps Sustained Performance--MD-5
Implements IPsec AH and HMAC Transforms

SECURE KERNEL CONTROL
Tamper-Resistant Isolation of Cryptographic Functions
Enforces Security Perimeter Around Crypto Functions

and Crypto Storage Locations

Anticloning Protection
Secure Algorithm Download

SafeNet CGX LIBRARY
On-Chip SafeNet CGX Crypto Library with Flexible CGX

API

Includes

Chained and Parallel Execution Commands

Such as Hash-and-Encrypt

Embodied as 32K Words (32K 24) Kernel Program

Mask-Programmed into On-Chip ROM

On-Chip Protected 4K 16 Security Scratchpad RAM

RANDOM NUMBER GENERATOR
Hardware-Based Nondeterministic Random Number

Generator

Generates Internal Session Keys That Are Never

Exposed Outside of the SafeNet DSP

Redundant Fail-Safe Design
Up to 1.3 Mbits of Random Data Available per Second

FUNCTIONAL BLOCK DIAGRAM

BUS_MODE

IDMA MODE

PCI MODE

IDMA

BUS

INTERRUPTS

FLAGS

SPORT 0

SERIAL

PORTS

SPORT 1

PROTECTED

KERNEL

RAM

(4K 16)

EXTERNAL

MEMORY

INTERFACE

RNG

BLOCK

PUBLIC KEY

ACCELERATOR

32-BITS
DATA

26-BITS

ADDR

LASER

VARIABLE

STORE

SERIAL

EEPROM

INTERFACE

INTERRUPT

CONTROLLER

APPLICATION

REGISTERS

RAM/ROM

PF7/

INT_H

DMA-32

CONTROLLER

IDMA

INTERFACE

PCI OR

CARDBUS

INTERFACE

BUS_MODE

BUS_SEL

16-
OR

32-BIT

BUS

KERNEL

MODE

CONTROL

KERNEL ROM

32K 24

PROG ROM

16K 24

DATA ROM

16K 16

TIMER

ADSP-218x
DSP CORE

EMI BUS

ENCRYPT

BLOCK

(DES, 3-DES)

HASH

BLOCK

(MD-5, SHA-1)

SafeNet is a registered trademark of Information Resource Engineering (IRE).

REV. 0

ADSP-2141L

PUBLIC KEY ACCELERATOR
Accelerator for Math-Intensive Public Key Operations
Diffie-Hellman Negotiate: <29 ms (1024-Bit Modulus,

180-Bit Exponent)

RSA 1024-Bit Sign: <29 ms; RSA 1024-Bit Verify: 6 ms
DSA Sign: <39 ms; DSA Verify: <66 ms

KEY MANAGEMENT BLOCK
Laser-Programmed Unique Triple-DES Cryptovariable

Protects Off-Chip Storage

Support for Secure Storage of Both Secret Keys and

Public/Private Key Pairs

Trust-Model Rules Enforcement
Only Encrypted Keys May Be Exported Off the Chip
Internal Key Cache for 15 Keys--Can Be Expanded to

700 Keys On-Chip

Keys May Also Be Securely Stored Off-Chip, Allowing

Unlimited Storage

DSP CORE
40 MIPS Sustained Performance
Single-Cycle Instruction Execution
Single-Cycle Context Switch
Zero-Overhead Looping
Low Power Dissipation
16K Words (16K 24) On-Chip Program RAM
16K Words (16K 16) On-Chip Data RAM
64M Words Off-Chip Program and Data Memory
Programmable 16-Bit Interval Timer with Prescale

PCI BUS/CARDBUS INTERFACE
32-Bit 3.3 V Bus Interface
33

MHz or 40

MHz* Bus Speed

Bus Master and Target Modes
Can Directly DMA Between Crypto Functions and Other

PCI Bus Agents

*66 MHz speed pending chip characterization.

GENERAL DESCRIPTION

The ADSP-2141L SafeNet DSP is a highly integrated embedded
security processor that incorporates a sophisticated, general
purpose DSP, along with a number of high performance Cryp-
tographic function blocks, as well as PCI, DMA and Serial
EEPROM interfaces. It is fabricated in 0.35

CMOS triple-

layer metal technology and uses a 3.3 V power supply. It is
available in a 208-lead MQFP package with a commercial (0

to 70

C) temperature range.

DSP Core

The DSP is a standard Analog Devices ADSP-218x core with
full ADSP-2100 family compatibility. The ADSP-218x Core
combines the base DSP components from the ADSP-2100
family with the addition of two serial ports, a 16-bit internal
DMA port, a byte DMA port, a programmable timer, Flag I/O,
extensive interrupt capabilities, and on-chip program and data
memory. The external memory interface of the 218x core has
been extended to support up to 64M-words addressing for both
program and data memory. Some core enhancements have been
added in the ADSP-2141L, including on-chip security ROM
and interrupt functions. Refer to the Analog Devices ADSP-2183
data sheet for further information.

SafeNet CGX LibrarySecure Kernel

The SafeNet CGX Library is a crypto library embodied as firm-
ware (a secure kernel) that is mask-programmed into ROM within
the DSP. This solution protects the library from tampering. The
CGX Library provides the Application Programming Interface
(API) to applications that require security services from the
ADSP-2141L. Those applications may be software executing in
user mode on the DSP, or they may be external host software
accessing the ADSP-2141L via a PCI bus. Approximately 40
Crypto commands--called CGX (CryptoGraphic eXtensions)--
are provided at the API and a simple control block structure is
used to pass arguments into the secure kernel and return status.
The CGX library includes integrated drivers for the various
hardware crypto blocks on the chip. This allows the program-
mer to ignore those details and concentrate on other product
design issues.

The CGX library firmware runs under a protected mode state
of the DSP as described in the Kernel Mode Control section
following. This guarantees the security integrity of the system
during the execution of CGX processes and, for example, prevents
disclosure of cryptographic key data or tampering with a
security operation.

Kernel Mode Control

The Kernel Mode Control subsystem is responsible for enforcing
the security perimeter around the cryptographic functions of
the ADSP-2141L. The device may operate in either user mode
(kernel space is not accessible) or kernel mode (kernel space is
accessible) at a given time. When in kernel mode, the kernel RAM
and certain protected crypto registers and functions (kernel
space) are accessible only to the CGX library firmware. The
CGX Library executes host-requested macro-level functions
and then returns control to the calling application. The kernel
mode control subsystem resets the DSP should any security
violation occur, such as attempting to access a protected
memory location while in user mode.

REV. 0

ADSP-2141L

Protected Kernel RAM

The 4K

16 kernel RAM provides a secure storage area on the

ADSP-2141L for sensitive data such as keys or intermediate
calculations during public key operations. The Kernel Mode
Control subsystem (above) enforces the protection by allowing
only internal secure kernel mode access to this RAM. A public
keyset and a cache of up to 15 secret keys may be stored in kernel
RAM. Secure key storage may be expanded to 700 secret keys
by assigning segments of the DSP's internal data RAM to be
protected. Furthermore, a virtually unlimited number of data
encryption keys may be stored in an encrypted form in off-chip
memory.

Encrypt Block

The encrypt block performs high speed DES and Triple-DES
encrypt/decrypt operations. All four standard modes of DES are
supported: Electronic Code Book (ECB), Cipher Block Chaining
(CBC), 64-bit Output Feedback (OFB) and 1-bit, 8-bit and 64-
bit Cipher Feedback (CFB). The DES encrypt/decrypt operations
are highly pipelined and execute full 16-round DES in only four
clock cycles. Hardware support for padding insertion, verification
and removal further accelerates the encryption operation. Con-
text switching is provided to minimize the overhead of changing
crypto keys and Initialization Vectors (IVs) to nearly zero.

Hash Block

The secure hash block is tightly coupled with the encrypt block
and provides hardware accelerated one-way hash functions.
Both the MD-5 and SHA-1 algorithms are supported. Combined
operations that chain both hashing and encrypt/decrypt functions
are provided in order to significantly reduce the processing time
for data that needs both operations applied. For hash-then-encrypt
and hash-then-decrypt operations, the ADSP-2141L can perform
parallel execution of both functions from the same source and
destination buffers. For encrypt-then-hash and decrypt-then-hash
operations, the processing must be sequential, but minimum
latency is still provided through the pipeline chaining design. An
offset may be specified between the start of hashing and the
start of encryption to support certain protocols such as IPsec. A
`mutable bit handler' is also provided on the hash engine to
facilitate IPsec AH processing.

Random Number Generator (RNG) Block

The hardware random number generator provides a true, non-
deterministic noise source for the purpose of generating keys,
Initialization Vectors (IVs), and other random number require-
ments. Random numbers are provided as 16-bit words to the
kernel. The CGX kernel requests random numbers as needed to
perform requested CGX commands such as CGX_Gen_Key,
and can also directly supply from 1 to 65,535 random bytes to a
host application via the CGX_Random command.

Public Key Accelerator

The public key accelerator module works in concert with the
CGX kernel firmware to provide full public key services to the
host application. The kernel provides macro-level functions to
perform Diffie-Hellman key agreement, RSA encrypt or decrypt,
DSA compute and verify digital signatures. The hardware accel-
erator block speeds computation-intensive operations such as
large vector multiply, add, subtract, square.

PCI/Cardbus Interface

A full 40 MHz/33 MHz PCI bus interface has been added to the
core DSP functions. The 32-bit PCI interface supports both bus
master and target modes. The ADSP-2141L is capable of using
DMA to directly access data on other PCI entities and pass that
data through its encryption/hash engines.

32-Bit DMA Controller

The ADSP-2141L incorporates a high performance 32-bit DMA
controller which can be set up to move data efficiently between
Host PCI memory, the hash/encrypt blocks, and/or external
memory. The DMA controller can be used with the PCI bus in
master mode, thus autonomously moving 32-bit data with mini-
mal DSP intervention. Up to 255 long words (1020 bytes) can
be moved in a burst at up to 160 Mbytes per second.

Application Registers

The application registers are a set of memory-mapped registers
that facilitate communications between the ADSP-2141L and a
host processor via the PCI bus. One of the registers is a mailbox
that is 44 bytes long and set up to hold the CGX command
structure passed between the host and DSP processors. The
application registers also provide the mechanism that allows the
DSP and the external host to negotiate ownership of the hash/
encrypt block.

Serial EEPROM Interface

The serial EEPROM interface allows an external nonvolatile
memory to be connected to the ADSP-2141L for storing PCI
configuration information (Plug and Play), as well as general-
purpose nonvolatile storage. For example, encrypted (black)
keys could be stored into EEPROM for fast recovery after a
power outage.

Interrupt Controller

The DSP core provides support for 14 interrupt sources, includ-
ing six external and eight internal. All interrupts are prioritized
into 12 levels and interrupt nesting may be enabled or disabled
under software control. The security block interrupt controller
provides enhancements to the DSP interrupt functions.

Primarily, the interrupt controller provides a new interrupt
generation capability to the DSP or to an external host processor.
Under programmable configuration control, a crypto interrupt
may be generated due to completion of certain operations such
as encrypt complete, hash complete. The interrupt may either
be directed at the DSP core (on

IRQ2), or provided on an out-

put line (PF7/

INT_H) to a host subsystem.

Laser Variable Storage

The laser variable storage consists of 256 bits of tamper-proof
factory-programmed data that is only accessible to the internal
function blocks and the security kernel. Included in these laser
variable bits are:
·

Local Storage Variable (master key-encryption key)

Randomizer Seed (to supplement the true entropy fed into
the RNG)

Program Control Data (enables/disables various features and
configures the ADSP-2141L)

CRC of the Laser Data (to verify laser data integrity).

REV. 0

ADSP-2141L

The Program Control Data Bits (PCDBs) include configuration
for permitted key lengths, algorithm enables, Red KEK loading.
Most of the PCDB settings may be overridden with a digitally
signed token which may be loaded into the ADSP-2141L when
it boots. These tokens are created by IRE and each is targeted to
a specific ADSP-2141L using a hash of its unique identity.

Downloadable Secure Code

The ADSP-2141L allows additional security functions to be added
to the device through a secure download feature. Up to 16K
words of code may be downloaded into internal memory within
the DSP and this code can be given the security privileges of the
CGX kernel firmware. All downloaded firmware is authenticated
with a digital signature and verified with an on-chip public key.
Additional functions could include new encryption, hash or
public key algorithms such as IDEA, RC-4,

RIPEMD, elliptic

curve, or any other application that needs direct control over the
protected cryptographic hardware.

8K KERNEL TOP

KERNEL MODE

(PMOVLAYL = C)

(PMOVLAYH = 000)

8K KERNEL BASE

KERNEL MODE

(PMOVLAYL = F)

(PMOVLAYH = 000)

8K INTERNAL

PAGE

(PMOVLAYL = 0)

(PMOVLAYH = 000)

8K EXTERNAL

PAGE = 0

(PMOVLAYL = 1)

(PMOVLAYH = 000)

8K EXTERNAL

PAGE 1

(PMOVLAYL = 2)

(PMOVLAYH = 000)

8K KERNEL

PAGE 8191

(PMOVLAYL = 2)

(PMOVLAYH = FFF)

0x3FFF

0x2000

8K INTERNAL

(COMMON BANK)

0x1FFF

0x0000

UP TO 64 MEGAWORDS

EXTERNAL PROGRAM MEMORY

(PMOVLAYL ALTERNATES 2, 1, 2, 1...)

PMOVLAYL = LS NIBBLE OF PMOVLAY
PMOVLAYH = MS 3 NIBBLES OF PMOVLAY

SHADED = KERNEL SPACE

Figure 1. Program Memory (MMAP = 0)

8K KERNEL TOP

KERNEL MODE

(PMOVLAYL = C)

(PMOVLAYH = 000)

8K INTERNAL

(PMOVLAYL = 0)

(PMOVLAYH = 000)

0x3FFF

0x2000

0x1FFF

0x0000

PMOVLAYL = LS NIBBLE OF PMOVLAY
PMOVLAYH = MS 3 NIBBLES OF PMOVLAY

SHADED = KERNEL SPACE

8K KERNEL

KERNEL MODE

(PMOVLAYL = D)

(PMOVLAYH = 000)

8K KERNEL

KERNEL MODE

(PMOVLAYL = E)

(PMOVLAYH = 000)

8K KERNEL

KERNEL MODE

(PMOVLAYL = F)

(PMOVLAYH = 000)

8K EXTERNAL

Figure 2. Program Memory (MMAP = 1)

MEMORY-MAPPED

REGISTERS

PROTECTED

4K KERNEL RAM

(DMOVLAY = 000F)

KERNEL MODE

8K INTERNAL

(DMOVLAYL = 0)

(DMOVLAYH = 000)

8K EXTERNAL

PAGE = 0

(DMOVLAYL = 1)

(DMOVLAYH = 000)

8K EXTERNAL

PAGE 1

(DMOVLAYL = 2)

(DMOVLAYH = 000)

0x2000

UP TO 64 MEGAWORDS

EXTERNAL DATA MEMORY

(DMOVLAYL ALTERNATES 2, 1, 2, 1...)

SHADED = KERNEL SPACE

8K KERNEL

PAGE 8191

(DMOVLAYL = 2)

(DMOVLAYH = FFF)

MEMORY-MAPPED

REGISTERS

8160 WORDS

INTERNAL

0x1FFF
0x1800
0x17FF
0x1000
0x0FFF

0x0000

0x3FFF

0x3FE0
0x3FDF

Figure 3. Data Memory

ARCHITECTURE OVERVIEW

This section provides an architecture-level description of the
unique function blocks within the ADSP-2141L.

Memory Map

The ADSP-2141L memory map is very similar to that of the
ADSP-2183 DSP, except that it includes significantly more off-
chip memory addressing, and has additional crypto registers
which are accessible to the user.

DSP Core

The DSP core is architecturally identical to the ADSP-218x
with a few exceptions.

The memory map includes additional external memory
addressing through the PMOVLAY and DMOVLAY mecha-
nisms. For more information, see the Memory Map section.

Additional memory-mapped crypto registers are available in
the kernel data RAM space.

The PF7/

INT_H flag pin may be reassigned to be the host

interrupt output.

REV. 0

ADSP-2141L

IRQ2 now can include interrupt sources from the crypto
subsystem, depending on interrupt mask registers.

A new read register has been added to indicate the state of
interrupt enable and interrupt masks.

The kernel mode control subsystem has been added to super-
vise the protected mode of operation of the DSP core.

Internal RAM protection logic has been added to allow the
kernel to seize increments of 1K word of internal PRAM and
DRAM.

Bus mode configuration (218x vs. PCI) pins have been added.

32K words of kernel program ROM have been added to the
DSP memory space. (See the Memory Map section.)

Kernel Mode Control

The kernel mode control subsystem provides the following
functions which serve to enforce the security integrity of the
ADSP-2141L:

Provide a means to securely enter the kernel mode.

Provide a means to properly exit the kernel mode.

Prevent user mode access to protected memory and register
locations.

Manage interrupts during kernel mode executions.

Manage the reset function to ensure that sensitive variables
in DSP registers are erased.

Most of the kernel mode control functions are implemented in
the hardware of the ADSP-2141L and are not directly visible to
nonkernel applications (user mode). Any attempt by a user
mode application program running on the DSP to access a
kernel space addresses (PRAM 0x2001 0x3FFF, PMOVLAY
000C 000F; or DRAM 0x0000 0x17FF, DMOVLAY 000F)
results in an immediate chip reset and all sensitive registers and
memory locations are erased. Kernel mode may only be entered
via a call, jump or increment to address 0x2000 with PMOVLAY

set to 0x000F. Once in kernel mode, any branch to nonkernel
space program memory causes the DSP to return to user mode.
(Note: For security reasons when in kernel mode, the DSP does
not respond to Emulator bus requests.)

The kernel mode can be interrupted during execution; however,
during certain periods where sensitive data is being moved, all
interrupts are disabled. Within the interrupt service routine,
another call to the kernel (CGX call) may be made if desired,
although there are limitations on which CGX commands may
preempt another. (For information, see the ADSP-2141L CGX
Interface Programmer's Guide http://www.ire-ma.com/proddoc.htm.)
Only one level of kernel mode nesting is permitted. An interrupt
to a user mode vector location while in nested kernel mode will
also trigger the violation reset logic.

Once the interrupt service routine is finished, the return-from-
interrupt must return control back to the kernel at the address/
overlay that was originally interrupted, otherwise the protection
logic will issue a chip reset.

Hash and Encrypt Block Overview

The encrypt block is tightly coupled to the hash block in the
ADSP-2141L and therefore the two are discussed together.
Refer to Figure 4, Hash/Encrypt Functional Block Diagram, for
the following description.

The algorithms implemented in the combined hash and encryp-
tion block are: DES, Triple DES, MD-5 and SHA-1. Data can
be transferred to and from the module once to perform both
hashing and encryption on the same data stream. The DES
encrypt/decrypt operations are highly paralleled and pipelined,
and execute full 16-round DES in only four clock cycles. The
internal data flow and buffering allows parallel execution of
hashing and encryption where possible, and allows processing of
data concurrently with I/O of previous and subsequent blocks.

PAD

CONSUME

AND VERIFY

WRITE

CONTEXT

HASH
DIGEST

READ

CONTEXT

DSP
OR
PCI

16-/32-BIT

OUTPUT

BUS

REGISTER

ADDRESS

DSP

PCI

16-/32-BIT

INPUT

BUS

ENCRYPT/

DECRYPT

BLOCK

CONTEXT

STORAGE (0/1)

HASH

BLOCK

PAD

INSERTION

512-BIT

FIFO

(ENCRYPT-THEN-HASH)
(DECRYPT-THEN-HASH)

512-BIT

FIFO

MUTABLE BIT

PROCESSING

PAD

INSERTION

Figure 4. Hash/Encrypt Functional Block Diagram

REV. 0

ADSP-2141L

Context switching is optimized to minimize the overhead of
changing cryptographic keys to near zero.

The software interface to the module consists of a set of
memory-mapped registers, all of which are visible to the DSP and
most of which can be enabled for host access via the PCI bus. A
set of five, 16-bit registers define the operation to be performed,
the length of the data buffer to be processed, in bytes, the offset
between the start of hashing and encryption (or vice versa), and
the padding operation. If the data length is unknown at the time
the encrypt/decrypt operation is started, the data length register
may be set to zero, which specifies special handling. In this case,
data may be passed to the hash/encrypt block indefinitely until
the end of data is encountered. At that time, the operation is
terminated by writing a new control word to the hash/encrypt
control register (either to process the next packet or to invoke
the idle state if there is no further work to do). This will close
out the processing for the packet, including the addition of the
selected crypto padding.

A set of seven status registers provides information on when a
new operation can be started, when there is space available to
accept new data, when there is data available to be read out, and
the results from the padding operation.

Crypto Contexts

There are two sets of crypto-context registers. Each context
contains a DES or triple DES key, initialization vector, and
precomputed hashes (inner and outer) of the authentication key
for HMAC operations. The contexts also contain registers to
reload the byte count from a previous operation (which is part
of the hashing context), as well as an IV (also called salt) for
decrypting a black key, if necessary.

Once a crypto-context has been loaded and the operation
defined, data is processed by writing it to a data input FIFO. At
the I/O interface, data is always written to, or read from, the
same address. Internally, the hash and encryption functions
have separate 512-bit FIFOs, each with their own FIFO man-
agement pointers. Incoming data is automatically routed to one
or both of these FIFOs, depending on the operation in progress.
Output from the encryption block is read from the data output
FIFO. In encrypt-hash or decrypt-hash operations, the data is
also automatically passed to the hashing data input FIFO. Output
from the hash function is always read from the digest register of
the appropriate crypto-context.

The initialization vector to be used for a crypto operation can be
loaded as part of a crypto-context. When an operation is complete,
the same context will contain the resulting IV produced at the
end, which can be saved away and restored later to continue the
operation with more data.

In certain packet-based applications such as IPsec, a feature is
available that avoids the need for the control software to generate
and load random IVs for outgoing (encrypted) packets. Effec-
tively, the IV register can be configured to be automatically
updated with new random numbers for each encrypted packet,
with almost no software intervention.

Padding

When the input data is not a multiple of eight bytes (a 64-bit
DES block), the encrypt module can be configured to automati-
cally append pad bytes. There are several options for how the
padding is constructed, which are specified using the pad control
word of the operation description. Options include zero padding,
pad-length character padding (PKCS#7), incrementing count,

with trailing pad length and next header byte (for IPsec), or
fixed character padding. Note that for the IPsec and PKCS#7
pad protocols, there are cases where the padding not only fills
out the last 8-byte block, but also causes an additional 8-byte
block of padding to be added.

For the hash operations, padding is automatically added as
specified in the MD-5 and SHA-1 standards. When the hash
final command is issued indicating the last of the input data, the
algorithm-specified padding and data count bits are added to the
end of the hash input buffer prior to computing the hash.

Data Offsets

Certain security protocols, including IPsec, require portions of a
data packet to be hashed while the remainder of the data is both
hashed and encrypted. The ADSP-2141L supports this require-
ment through the OFFSET register, which allows specifying the
number of 32-bit dwords of offset between the hash and encrypt/
decrypt operations.

Black Key Loads

The cryptographic keys loaded as part of a crypto-context can
be stored off-chip in a black, or encrypted, form. If the appropri-
ate control bit is set (HECNTL Bit 15), the DES or 3-DES key
will be decrypted immediately after it is written into the context
register. The hardware handles this decryption automatically.
The Key Encryption Key (KEK) that covers the black keys
is loaded in a dedicated write-only KEK register within the
ADSP-2141L. The IV for decrypting the black secret key is
called `salt' and must be stored along with the black key (as part
of the context). Note that 3-DES CBC mode is used for pro-
tecting 3-DES black keys and single DES CBC is used for
single DES black keys.

When black keys are used, the key-decrypt operation adds a
6-cycle overhead (0.15

s @ 40 MHz) for DES keys or 36-cycle

overhead (0.9

s @ 40 MHz) for triple DES keys each time a

new crypto-context is loaded. (Note that if the same context is
used for more than one packet operation, the key decryption does
not need to be performed again.) Depending on the sequencing
of operations, this key decryption may in fact be hidden (from a
performance impact perspective) if other operations are underway.
This is because the black key decryption process only requires
that the DES hardware be available. For example, if the DSP is
reading the previous hash result from the output FIFO, the
black key decryption can be going on in parallel. Also note that
the data driver firmware does NOT have to wait for the key to
be decrypted before writing data to the input FIFO. The hard-
ware automatically waits for the key to be decrypted before
beginning to process data for a given packet. So, with efficient
pipeline programming, it is possible to make the impact of black
key essentially zero.

The KEK for key decryption is loaded via the secure kernel
firmware using one of the CGX key manipulation commands.
(For more information, see the Command Summary section.)
This KEK is typically the same for all black keys, since it is usually
protecting local storage only. It is designated the DKEK in the
CGX API.

One of the laser-programmed configuration bits specifies whether
red (plaintext) keys are allowed to be loaded into the ADSP-
2141L from a host. If the AllowRedKeyLoad laser bit is not set,
keys may only be loaded in their black form. This is useful in
systems where export restrictions limit the key length that may
be used or where the external storage environment is untrusted.

REV. 0

ADSP-2141L

If the AllowRedKeyLoad bit is set, keys may be loaded either in
their black form, or in the red or unencrypted form. Note that
the laser configuration bit may be overridden with a signed
enabler token. (For more information, see the Laser Variable
Storage section.)

Depending on the definition of the security module boundary in
a given application, FIPS 140-1 may require the use of black
keys to protect key material. In other words, if the security
boundary does not enclose the database where keys are stored,
those keys must be protected from compromise. Black key is a
satisfactory way to meet this FIPS requirement.

Random Number Generator (RNG) Block

The random number generator is designed to provide highly
random, nondeterministic binary numbers at a high delivery rate
with little software intervention. The random numbers are acces-
sible to the kernel firmware in a 16-bit register that may be read
by the DSP in kernel mode. Once the register is read, the RNG
immediately generates a new 16-bit value that is available within
12 microseconds.

All application-level access to random numbers should occur
through the Kernels CGX_RANDOM command (see the
Command Summary section).

The random number generator is designed using a "shot noise"
true entropy source which is sampled by the master 40 MHz
clock of the ADSP-2141L. The entropy source then feeds a
complex nonlinear combinatorial circuit that produces the final
RNG output based on the interaction of the entropy source and
the 40 MHz system clock. Over 200 stages of Linear Feedback
Shift Register (LFSR) are incorporated into the RNG design.

In order to facilitate FIPS 140-1 compliance, an option may be
selected during CGX kernel initialization to enable an ANSI
X9.17 Annex C post-randomizer to be applied to the output of
the RNG. This randomizer applies the DES ECB algorithm
multiple times to further disperse and whiten the random source.
Although this is not necessary to ensure the quality of the random
numbers, it meets the criteria for a NIST-approved random num-
ber generation algorithm.

Public Key Accelerator (PKAC)

The public key arithmetic coprocessor (otherwise known as a
BigNum processor) is designed to support long vector calcula-
tions of the kind needed to perform RSA, Diffie-Hellman and
Elliptic Curve operations.

The PKAC can perform multiplication, squaring, addition and
subtraction on arbitrary length bit vectors. The CGX software is
responsible for setting the address register for the operands and

result, as well as specifying the length and operation type. Once
the operation type field is written, the processor polls the opera-
tion complete status while the calculation is carried out.

The PKAC utilizes the protected kernel RAM for input, output
and intermediate variable storage. It may only be accessed from
the secure kernel mode. Since public key computations typically
take many milliseconds to complete, they may be preempted
using a DSP interrupt.

Most application interaction with the public key accelerator will
occur via the CGX software interface (see the Command Inter-
face section). Both high level public key operations such as RSA
Sign or Create Diffie-Hellman Key, as well as primitive operations
such as Multiply Vector, Add Long Vector, etc., are presented
via the CGX interface.

PCI/Cardbus Interface

The ADSP-2141L appears as a target on the PCI Bus as a single
contiguous memory space of 128k bytes. In this memory space,
the host can access the following:

The unprotected internal crypto registers of the ADSP-2141L

IDMA access to the DSP's internal program memory (PM)
and data memory (DM)

Paged access to external memory connected to the
ADSP-2141L

The Kernel RAM (KRAM) if it has been unprotected by an
extended mode program

As a PCI Master, the ADSP-2141L can transfer data between:

The unprotected internal crypto registers and FIFOs of the
ADSP-2141L and PCI Host memory

External memory and PCI Host memory

A 32-bit DMA engine within the ADSP-2141L facilitates these
transfers and permits full PCI bandwidth use.

Serial EEPROM Interface

The serial EEPROM interface allows the ADSP-2141L to auto-
matically read the PCI configuration parameters at chip power-up.
IRE can provide the data content for the EEPROM to properly
set the chip device vendor ID, type and properties for full com-
pliance with the PCI Plug and Play standards.

In addition to being used for storage of host bus parameters, any
extra space in the EEPROM may be accessed by the DSP, either
in user mode or kernel mode. Support for this function is not
included in the standard CGX command set. Refer to the
ADSP-2141 User's Manual for the information on the data
contents of the EEPROM. Refer to http://www.analog.com/
industry/dsp/ire.html.

Table I. Interrupt Sources

Internal Interrupt Sources

External Interrupt Sources

Interrupt

Notes

Interrupt

Notes

Reset

or Power-Up (PUCR = 1)

IRQ2

Edge- or Level-Sensitive

Power-Down

IRQL1

Level-Sensitive

SPORT0 Transmit

IRQL0

Level-Sensitive

SPORT0 Receive

IRQE

Edge-Sensitive

BDMA Interrupt

IRQ1

Edge- or Level-Sensitive

SPORT1 Transmit

Mixed with IRQ1

IRQ0

Edge- or Level-Sensitive

SPORT1 Receive

Mixed with IRQ0

Timer

REV. 0

ADSP-2141L

Interrupt Controller

The DSP core of the ADSP-2141L provides a powerful set of
interrupt sources. A total of 14 interrupt sources are available,
although two pairs are multiplexed, yielding 12 simultaneous
sources. Refer to Table I.

The ADSP-2141L enhances the existing interrupt controller
within the ADSP-218x DSP Core with some additional func-
tions related to the crypto functional blocks and the external
host bus interfaces. Two additional interrupt controller sub-
systems have been added to the basic interrupt controller as
shown in Figure 5.

The DSP interrupt controller allows programming between one
and nine sources for the IRQ2 interrupt to the DSP. The
DIMASK register provides the mask to select which interrupt
source is enabled. A pair of status registers, DUMSTAT and
DMSTAT, allow the DSP firmware to read the status of any
interrupt source either before or after the mask is applied.

The host interrupt controller allows programming between one
and five sources for the PF7/

INT_H interrupt output signal

(which may be connected to the interrupt input of the host
system). The HMASK register provides the mask to select which
interrupt source is enabled. A pair of status registers, HUMSTAT
and HMSTAT, allow the host firmware to read the status of any
interrupt source either before or after the mask is applied.

Laser Variable Storage

The laser variables are configured through 256 Fuses in the
ADSP-2141L, which are programmed during IC manufacture.
Each ADSP-2141L produced is programmed with a unique set
of Laser Variables.

Local Storage Variable (LSV--the Master Key-Encryption-Key)

Internal Seed Variable

H/E CONTEXT0
DONE

DICLR

DIFRC

DIMASK

HOST
INTERRUPT

H/E CONTEXT1
DONE

HOST
WROTE CMD

DMA xFER
DONE

DMA xFER
QUEUED

EXT MEM
CONFLICT

IRQ2

DICFG

DSP INTERRUPT CONTROLLER

DSP

INTERRUPT

INTH

TO HOST

CRYPTO INTERRUPT

SUBSYSTEM BOUNDRY

HOST UNMASKED STATUS REGISTER

DSP

WROTE

CMD

HASH/ENC

ERROR

HASH/ENC
ERROR

HICLR

HIFRC

HIMASK

HICFG

HOST INTERRUPT CONTROLLER

IFC

IRQ2

ADSP-2183

INTERRUPT

CONTROLLER

IMASK

ICNTL

RESET

POWER DOWN

SPORT0 Tx

SPORT0 Rx

BDMA INT

TIMER INT

SPORT1 Tx

SPORT1 Rx

INTERNAL

INTERRUPTS

IRQE

IRQL0
IRQL1

IRQ0
IRQ1
IRQ2

EXTERNAL

INTERRUPTS

DSP

DSP MASKED STATUS REGISTER

DSP UNMASKED STATUS REGISTER

HOST MASKED STATUS REGISTER

H/E CONTEXT1
DONE

H/E CONTEXT0
DONE

Figure 5. Interrupt Controller Block Diagram

48-Bit Program Control Data (enables/disables various fea-

tures and configures the ADSP-2141L)

CRC of the Laser Data (to verify integrity of the laser bits)

The LSV is a unique triple DES master key-encrypting key that
allows the ADSP-2141L to securely store data (primarily other keys)
off-chip for later reloading. This is necessary if more storage space
is needed than is available with on-chip RAM, or if keys need to
be saved and restored after a power outage. Each ADSP-2141L
produced is programmed with a unique, randomly generated
local storage variable.

The internal seed variable is used to randomly initialize the
RNG circuits before the entropy is mixed in. Each ADSP-2141L
produced is programmed with a unique, randomly generated
internal seed variable which is loaded into the RNG at chip boot
time and cannot ever be read by software.

The 48 Program Control Data Bits (PCDBs) include configura-
tion for permitted key lengths, algorithm enables, red KEK
loading, internal IC pulse timing characteristics. The PCDBs
provide configuration data that falls into three categories:

· Internal IC pulse-timing characteristics

· ADSP-2141L hardware version number field

· ADSP-2141L feature enables

The first two categories consist of data that cannot be altered
once the ADSP-2141L has been fabricated.

The feature enables can be overridden using a factory token
enabler which may be passed to the CGX kernel as part of the
CGX_INIT command. This token is digitally signed with an
IRE private key and verified internal to the ADSP-2141L with
its public key. The CGX_INIT command is documented in the
ADSP-2141 CGX Interface Programmer's Guide (available from
http://www.ire-ma.com/proddoc.htm).

REV. 0

ADSP-2141L

PIN FUNCTIONS
I/O Descriptions

This section describes the physical I/O hardware on the ADSP-2141L.

PIN FUNCTION DESCRIPTIONSI/O Hardware

# of

Input/

Pin Name

Pins

Output

Function

External Memory Bus
Address [25:0]

Address Output Pins for Program, Data, Byte and I/O Spaces (13 Bits 2183, 13 Bits
from Overlay Register) Note: A0 not used for 32-bit memory.

Data [31:0]

I/O

Data I/O Pins for Program and Data Memory Spaces
D31:0 are used for wide-bus data memory.
D23:0 are used for DSP Program RAM.
D23:8 are used for I/O Space.
D23:8 are used for DSP Data RAM.
D15:8 are used for byte memory.
D23:16 are also used as Byte Space Addresses

Interrupts
IRQ2

Edge- or Level-Sensitive Interrupt Request

IRQL0

Level-Sensitive Interrupt Requests

IRQL1

Level-Sensitive Interrupt Requests

IRQE

Edge-Sensitive Interrupt Request

Bus Signals
BR

Bus Request Input

Bus Grant Output

BGH

Bus Grant Hung Output

PMS

Program Memory Select Output

DMSL

Data Memory Select Output (Lower 16 Bits for 32-Bit DM)

DMSH

Upper Memory Select Output (Upper 16 Bits for 32-Bit DM, Not Used for 16-Bit DM)

BMS

Byte Memory Select Output

IOMS

I/O Space Memory Select Output

CMS

Combined Memory Select Output (

PMS, DMS*, IOMS, BMS)

Memory Read Enable Output

Memory Write Enable Output

Miscellaneous
MMAP

Memory Map Select Input (1 = Overlay External at 0x0000)

BMODE

Boot Option Control Input (0 = BDMA, 1 = IDMA)

CLKIN, XTAL

Clock or Quartz Crystal Input (1/2 of the ADSP-2141 Clock)

CLKOUT

Processor Clock Output

Serial Ports
SPORT0
SCLK0

I/O

Serial Port 0 Clock

DR0

Serial Port 0 Receive Data Input

RFS0

I/O

Serial Port 0 Receive Frame Sync

DT0

Serial Port 0 Transmit Data Output

TFS0

I/O

Serial Port 0 Transmit Frame Sync

SPORT1
Port Configuration
(System Control Reg) >

1 = Serial Port

0 = Other

SCLK1

I/O

Serial Port 1

Clock

DR1

Serial Port 1 Receive Data Input

Flag In

RFS1

I/O

Serial Port 1 Receive Frame Sync

IRQ0

DT1

Serial Port 1 Transmit Data Output

Flag Out

TFS1

I/O

Serial Port 1 Transmit Frame Sync

IRQ1

Power-Down
PWD

Power-Down Initiate Control

PWDACK

Power-Down Acknowledge

REV. 0

ADSP-2141L

# of

Input/

Pin Name

Pins

Output

Function

Flags
PF6:0

I/O

Programmable I/O Pins

PF7/

INT_H

I/O

Programmable I/O PinorInterrupt Output (Host Mode)

Emulator
EE

(Emulator Only)

EBR

(Emulator Only)

EBG

(Emulator Only)

ERESET

(Emulator Only)

EMS

(Emulator Only)

EINT

(Emulator Only)

ECLK

(Emulator Only)

ELIN

(Emulator Only)

ELOUT

(Emulator Only)

Serial EEPROM Interface
EE_DI

Serial EEPROM Data In

EE_DO

Serial EEPROM Data Out

EE_CS

Serial EEPROM Chip Select

EE_SK

Serial EEPROM Clock

Bus Select
BUS_MODE

Processor Bus Select

BUS_SEL

Bus Select

PCI Bus (Dedicated Pins)
PCI_CLK

PCI Clock

PCI_PAR

I/O

PCI Parity Bit

PCI_IRDY

I/O

PCI Initiator Ready

PCI_STOP

I/O

PCI Abort Transfer

*When

DMS is enabled for generation of CMS, the CMS is activated for DSP access to external memory only, NOT for DMA controller accesses.

Bus Mode Descriptions

The Pin Function Descriptions, Bus Mode table, shows the multiplexed pins in 2183 and PCI mode. For more information on the
PCI pins MPLX1MPLX12, see the Pin Functions DescriptionPCI Mode Multiplex Bus table on the following page.

PIN FUNCTION DESCRIPTIONS--Bus Mode

# of

Input/

2183 Mode

PCI Mode

Bus Mode

Pins

Output

(bus_mode = 0, bus_sel = 0)

(bus_mode = 1, bus_sel = 0)

MPLX_RESET

RESET_1

Pci_

rst

MPLX1

I/O

Pci_

cbe3

MPLX2

I/O

Pci_

cbe2

MPLX3

I/O

Pci_

cbe1

MPLX4

I/O

Pci_

cbe0

MPLX5

IRD

Pci_idsel

MPLX6

IWR

Pci_

gnt

MPLX7

I/O

Pci_

frame

MPLX8

I/O

IAL

Pci_

devsel

MPLX9

I/O

IACK

Pci_

trdy

MPLX10

I/O

FL0

Pci_

perr

MPLX11

I/O

FL1

Pci_

serr

MPLX12

FL2

Pci_

req

MPLX_BUS[31:0]

I/O

IAD15:0

Pci_ad15:0

N/C 31:16

Pci_ad31:16

Power
GND

Ground Pins

VDD

Power Supply Pins (3.3 V)

Total:

208

Includes the pins from this table and the I/O Hardware Pin Function Description table.

REV. 0

ADSP-2141L

IDMA Mode Multiplex Bus Pin Definition
IDMA Port (218x Mode)

PIN FUNCTION DESCRIPTIONS--IDMA Mode Multiplex Bus

Pin Name

IDMA Name

Pins

I/O

Description

MPLX5

IRD

IDMA Port Read Input

MPLX6

IWR

IDMA Port Write Input

MPLX7

IDMA Port Select

MPLX8

IAL

IDMA Port Address Latch

MPLX9

IACK

IDMA Port Access Ready Acknowledge

MPLX10

FL0

Output Flags

MPLX11

FL1

Output Flags

MPLX12

FL2

Output Flags

MPLX_BUS

IAD

I/O

IDMA Data I/O

PCI Port

PIN FUNCTION DESCRIPTIONS--PCI Mode Multiplex Bus

Pin Name

PCI Name

Pins

I/O

Description

MPLX1

Pci_

cbe3

I/O

Bus Command / Byte Enable 3

MPLX2

Pci_

cbe2

I/O

Bus Command / Byte Enable 2

MPLX3

Pci_

cbe1

I/O

Bus Command / Byte Enable 1

MPLX4

Pci_

cbe0

I/O

Bus Command / Byte Enable 0

MPLX5

Pci_idsel

Initialization Device Select

MPLX6

Pci_

gnt

Bus Grant

MPLX7

Pci_

frame

I/O

Cycle Frame

MPLX8

Pci_

devsel

I/O

Device Select

MPLX9

Pci_

trdy

I/O

Target Ready

MPLX10

Pci_

perr

I/O

Parity Error

MPLX11

Pci_

serr

I/O

System Error

MPLX12

Pci_

req

PCI Bus Request

MPLX_BUS

Pci_ad15:0
Pci_ad31:16

I/O

PCI Address/Data Bus

PF7/

INT_H

Pci_

intA

PCI Interrupt A Request

SYSTEM INTERFACE

The ADSP-2141L may be integrated into a wide variety of sys-
tems, including those that already have a microprocessor and
those that will use the ADSP-2141L as the main processor. The
device can be configured into one of two Host Bus modes:
IDMA or PCI.

IDMA Bus Mode

The IDMA bus mode operates the same as in a native ADSP-
218x device, as described in this section.

The IDMA port provides an efficient means of communication
between a host system and the ADSP-2141L. The port is used
to access the on-chip program memory and data memory of the
DSP with only one DSP cycle per word overhead. The IDMA
port cannot, however, be used to write to the DSP's memory-
mapped control registers.

The IDMA port has a 16-bit multiplexed address and data bus,
and supports reading or writing 16-bit data (DM) or 24-bit
program memory (PM). The IDMA port is completely asyn-
chronous and can be written to while the ADSP-2141L is oper-
ating at full speed.

The DSP memory address is latched and then automatically
incremented after each IDMA transaction. An external device can
therefore access a block of sequentially addressed memory by

specifying only the starting address of the block. This increases
throughput as the address does not have to be sent for each
memory access.

The IDMA port access occurs in two phases. The first is the
IDMA address latch cycle. When the acknowledge is asserted, a
14-bit address and 1-bit destination type can be driven onto the
bus by an external device. The address specifies an on-chip
memory location; the destination type specifies whether it is a
DM or PM access. The falling edge of the address latch signal
latches this value to the IDMAA register.

Once the address is stored, data can either be read from or
written to the ADSP-2141L's on-chip memory. Asserting the
select line (

IS) and the appropriate read or write line (IRD and

IWR respectively) signals the ADSP-2141L that a particular
transaction is required. In either case, there is a one-processor-
cycle delay for synchronization. The memory access consumes
an additional processor cycle.

Once an access has occurred, the latched address is automati-
cally incremented and another access can occur.

Through the IDMAA register, the ADSP-2141L can also
specify the starting address and data format for DMA operation.

Figure 6 illustrates a typical system configuration for the
IDMA mode.

REV. 0

ADSP-2141L

ADSP-2141

SERIAL
DEVICE

1/2X CLOCK

CRYSTAL

SCLK1
RFS1 OR IRQ0
TFS1 OR IRQ1
DT1 OR FO
DR1 OR FI

SPORT1

SCLK0
RFS0
TFS0
DT0
DR0

SPORT0

SERIAL
DEVICE

PCI_CBE3-0

PCI_IDSEL

PCI_REQ
PCI_GNT

PCI_FRAME

PCI_DEVSEL
PCI_TRDY
PCI_PERR
PCI_SERR

PCI_AD310

PCI_RST

PCI_CLK
PCI_PAR

PCI_IRDY
PCI_STOP

PF7/

INT_H

PCI PORT

PCI

BUS

IRQ2
IRQE
IRQL0
IRQL1

INTERRUPT

SOURCES

CLKOUT

CLKIN
XTAL

PF06

PMS

CMS

(OPTIONAL)

DMSH

DMSL

ADDR25-0

A130

D2316

D158

BMS

DATA 31-0

A100

D238

ADDR

DATA

16-BIT

I/O SPACE

2048

LOCATIONS

A0-A21

DATA

BYTE

MEMORY

(BOOT

LOADER)

IOMS

A250

D230

ADDR

DATA

8192

8K 24

PM SEGMENTS

EXTERNAL

MEMORY BUS

PROGRAM

OVERLAY

MEMORY

A250*

DATA

OVERLAY

MEMORY

D150

8192

8K 16

SEGMENTS

D3116

BGH

PWD

PWDACK

UP TO 32M 32

BUS

ARBITER

BUS_MODE

BUS_SEL

VDD

MMAP

BMODE

VDD OR GND

EE_DI

EE_DO

EE_CS

EE_SK

EEPROM

*ADDR0 FROM THE ADSP-2141
IS NO CONNECT FOR 32-BIT MEMORY.
ADSP-2141 ADDR1 IS WIRED TO RAM A0.

INTA

SERIAL

EEPROM

Figure 7. ADSP-2141L PCI System Configuration

PCI Bus Mode

Figure 7 illustrates a typical system configuration for the
PCI mode.

REV. 0

ADSP-2141L

DEVICE OPERATION

OPERATIONAL MODES
Security Modes

The ADSP-2141L operates in one of two security modes: kernel
mode or user mode. The mode switching is performed on the fly
as program execution proceeds. Kernel mode is entered via a
jump or call to address 0x2000 with PMOVLAY set to 0x000F.
Kernel mode will exit on its own once it has completed a requested
operation (or terminates due to an error).

Special interrupt handling is performed if the DSP is executing
in kernel mode. While executing a CGX command in kernel
mode, it is possible to interrupt to a nonprotected vector loca-
tion and then invoke the kernel again during the interrupt han-
dler. The [IF CONDITION] RTI instruction must be used to
return to the kernel from the interrupt handler. The return
address and PMOVLAY page must match the interrupted ad-
dress and PMOVLAY page. If not, the violation reset logic will
be triggered. Only one level of kernel mode nesting is permitted.
An interrupt to a nonprotected vector location while in nested
kernel mode will also trigger the violation reset logic.

While in kernel mode, it is possible to interrupt to a protected
vector location. In this case, the processor remains in kernel
mode. The [IF CONDITION] RTI instruction must be used to
return the processor from the interrupt handler. There is no
imposed limit on the number of nested interrupts to a protected
vector location.

Bus Modes

The ADSP-2141L Host Bus may be configured for one of two
personalities: IDMA Mode or PCI Bus Mode. The selection of
mode is made with two hardware control inputs BUS_MODE
and BUS_SEL at boot time.

Table II. Bus Mode Selection

Bus Mode Pins

BUS_MODE

BUS_SEL

IDMA Mode

PCI Bus Mode

This selection may not be changed after the ADSP-2141L
comes out of power-up reset. It is typically expected that the bus
mode signals are tied to ground or VDD on the PC Board.

Boot Modes

The ADSP-2141L may be bootstrap-loaded from one of three
sources: byte-wide memory, host processor bus, or external
program memory. The selection of mode is made with two
hardware control inputs BMODE and MMAP. When the host
processor boot mode is selected, any one of the two bus modes
may be used.

Table III. Boot Mode Selection

Boot Mode Pins

BMODE

MMAP

Byte-Wide (BDMA) Boot Mode

Host Bus (IDMA) Boot Mode

External Program Boot Mode

The hardware pin states are not relevant after the ADSP-2141L
comes out of power-up reset. Refer to the ADSP-2141L User's
Manual (available from IRE) for information on BDMA, IDMA
and external program boot modes.

COMMAND INTERFACE

This section provides a general overview of the software com-
mand interface to the crypto functions in the ADSP-2141L.
Refer to the ADSP-2141 CGX Interface Programmer's Guide
(available from http://www.ire-ma.com/proddoc.htm) for more
details.

Overview

The ADSP-2141L provides an embedded crypto library that
provides a command interface API (Application Programming
Interface) to outside applications. These commands are referred
to as CGX (CryptoGraphic eXtensions).

The CGX API simultaneously enforces certain security policies
within the ADSP-2141L and insulates applications from the
details of many complex cryptographic operations. The security
policy built into the ADSP-2141L has some of the following
rules:

Unencrypted (red) keys may never be retrieved from the
ADSP-2141L.

Keys within the ADSP-2141L are marked with an attributes
field that specifies key type and trust level.

A key's type field must match the use in a requested opera-
tion (i.e., cannot use a KEK to encrypt traffic).

Keys generated internal to the ADSP-2141L (i.e., from RNG)
are marked as trusted.

Keys that are negotiated or imported from outside systems are
marked untrusted (although they may still be quite secure).

Separate trusted and untrusted key hierarchies may be main-
tained and customer applications may choose which trust
level is required for a given command.

For most key management operations, the CGX interface must
be used. However, for certain high performance encryption/
hashing applications, the CGX interface may be bypassed and
either the DSP or a host processor may exercise direct control
over the hash/encrypt block.

REV. 0

ADSP-2141L

COMMAND SUMMARY

Approximately 40 CGX Commands are supported in the API to the ADSP-2141L.

General Utilities

INIT

Initializes Secure Kernel and Allow Reconfiguration of the ADSP-2141L

DEFAULT

Restores Factory Default Settings

RANDOM

Generates Random Numbers (between 1K and 64K bytes)

GET CHIPINFO

Returns ADSP-2141L System Information

SELF TEST

Runs a suite of self-tests on the hardware and CGX

Symmetrical Key Management

UNCOVER KEY

Loads and Decrypts a Secret Key

GEN KEY

Generates a Secret Key

GEN KEK

Generates an Internal Key Encryption Key

GEN RKEK

Generates a Key Recovery Key Encryption Key

SAVE KEY

Saves a key protected by the Recovery Key (RKEK)

LOAD KEY

Imports a Red (plaintext) User Secret Key

DERIVE KEY

Derives a Secret Key from a Pass Phrase

TRANSFORM KEY

Transforms a Secret Key using IPsec

DESTROY KEY

Removes Secret Key from the KCR

EXPORT KEY

Exports an IRE-format Secret Key

IMPORT KEY

Imports an IRE-format Secret Key

Symmetrical Encryption

ENCRYPT

Encrypts Data

DECRYPT

Decrypts Data

LOAD KG

Loads Secret Key into HW/SW Key Generator

Hash

HASH INIT

Initializes the Hash Operator

HASH DATA

Hash Customer Data

HASH ENCRYPT

Hash and Encrypt Customer Data

HASH DECRYPT

Hash and Decrypt Customer Data

PRF Functions

MERGE KEY

Combines two secret keys into one key

MERGE LONG KEY

Combines two secret keys into a data string (long key)

EXTRACT LONG KEY

Creates a secret key from a data string (long key)

PRF DATA

Hash multiple data items using HMAC

PRF KEY

Completes the above HMAC and create secret key

Asymmetrical Key Management

GEN PUBKEY

Generates a Public Keyset (Public and Private Parts)

GEN NEWPUBKEY

Generates a part of a Public Keyset

GEN NEGKEY

Generates a Diffie-Hellman Derived Secret Key

EXPORT PUBKEY

Exports an IRE-format Public Key

IMPORT PUBKEY

Imports an IRE-format Public Key

Asymmetrical Encryption

PUBKEY ENCRYPT

Encrypts Data using RSA Public Key

PUBKEY DECRYPT

Decrypts Data using RSA Public Key

Digital Signatures

SIGN

Digitally Signs a Message

VERIFY

Verifies a Digital Signature

Math Utilities

ADD VECTOR

Performs a Vector Add Operation

SUB VECTOR

Performs a Vector Subtract Operation

MULT VECTOR

Performs a Vector Multiply Operation

EXP VECTOR

Performs a Vector Exponentiate Operation

SHIFT VECTOR

Performs a Vector Right or Left Shift Operation

Extended Mode

LOAD EXTENDED

Loads/Enables Extended (Downloaded) Algorithm Block

EXECUTE EXTENDED

Executes Extended (Downloaded) Algorithm Block

REV. 0

ADSP-2141L

ABSOLUTE MAXIMUM RATINGS

Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . 0.3 V to +4.6 V
Input Voltage . . . . . . . . . . . . . . . . . . . . 0.5 V to V

+ 0.5 V

Output Voltage Swing . . . . . . . . . . . . . 0.5 V to V

+ 0.5 V

Operating Temperature Range (Ambient) . . . . . 0

C to 70

Storage Temperature Range . . . . . . . . . . . . 65

C to +150

Lead Temperature (5 sec) MQFP . . . . . . . . . . . . . . . . . 280

CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection.
Although the ADSP-2141L features proprietary ESD protection circuitry, permanent damage
may occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD
precautions are recommended to avoid performance degradation or loss of functionality.

WARNING!

ESD SENSITIVE DEVICE

Frequency Dependency For Timing Specifications

is defined as 0.5t

CKI

. The ADSP-2141L uses an input clock

with a frequency equal to half the instruction rate: a 20.0 MHz
input clock (which is equivalent to 50 ns) yields a 25 ns processor
cycle (equivalent to 40 MHz). t

values within the range of 0.5t

CKI

period should be substituted for all relevant timing parameters to
obtain the specification value.

Example: t

CKH

= 0.5t

7 ns = 0.5 (25 ns) 7 ns = 8 ns

REV. 0

RECOMMENDED OPERATING CONDITIONS

K Grade

Parameter

Min

Max

Unit

Supply Voltage

3.0

3.6

AMB

Ambient Operating Temperature

ELECTRICAL CHARACTERISTICS

DC SPECIFICATIONS

K Grade

Parameter

Test Conditions

Min

Typ

Max

Unit

Hi-Level Input Voltage

1, 2

@ V

= max

2.0

Hi-Level CLKIN/Reset Voltage

@ V

= max

2.4

Lo-Level Input Voltage

1, 3

@ V

= min

0.4

Hi-Level Output Voltage

1, 4, 5

@ V

= min

= 0.5 mA

2.4

@ V

= min

= 100

0.3

Lo-Level Output Voltage

1, 4, 5

@ V

= min

= 2 mA

0.4

Hi-Level Input Current

@ V

= max

= V

max

Lo-Level Input Current

3 @ V

= max

= 0 V

OZH

Three-State Leakage Current

@ V

= max

= V

max

OZL

Three-State Leakage Current

@ V

= max

= 0 V

Supply Current (Idle)

10, 11

@ V

= 3.3

AMB

= 25

= 25 ns

= 30 ns

Supply Current (Dynamic)

11, 13

@ V

= 3.3

AMB

= 25

= 25 ns

195

= 30 ns

165

Input Pin Capacitance

3, 6, 14

@ V

= 2.5 V

= 1.0 MHz

AMB

= 25

Output Pin Capacitance

6, 7, 14, 15

@ V

= 2.5 V

= 1.0 MHz

AMB

= 25

NOTES

Bidirectional pins: D0D31, RFS0, RFS1, SCLK0, SCLK1, TFS0, TFS1, IAD015, PF0PF7.

Input only pins:

IRQ2, BR, MMAP, BMODE, BUS MODE, BUS SEL, DR0, DR1, PWD, IRQL0, IRQL1, IRQE, IS, IRD, IWR, IAL.

Input only pins: CLKIN,

RESET, IRQ2, BR, MMAP, BMODE, BUS MODE, BUS SEL, DR0, DR1, PWD, IRQL0, IRQL1, IRQE, IS, IRD, IWR, IAL.

Output pins:

BG, BGH, PMS, DMSL, DMSH, BMS, IOMS, CMS, RD, WR, IACK, PWDACK, A0A25, DT0, DT1, CLKOUT, FL20.

Although specified for TTL outputs, all ADSP-2141L outputs are CMOS-compatible and will drive to V

and GND, assuming no dc loads.

Guaranteed but not tested.

Output pins:

BG, BGH, PMS, DMSL, BMS, IOMS, DMSH, CMS, RD, WR, IACK, PWDACK, A0A25, DT0, DT1, CLKOUT, FL20, EE_DI, EE_CS, EE_SK.

0 V on BR. CLKIN active (to force three-state condition).

Three-statable pins: A0A25, D0D31,

PMS, DMSL, DMSH, BMS, IOMS, CMS, RD, WR, DT0, DT1, SCKL0, SCLK1, TFS0, TFS1, RFS0, RFS1, IAD0

IAD15, PF0PF7.

Idle refers to ADSP-2141L state of operation during execution of IDLE Instruction. Deasserted pins are driven to either V

or GND.

Current reflects device operating with no output loads.

= 0.4 V and 2.4 V. For typical supply currents, refer to Power Dissipation section.

measurement taken with 93% of instructions executing from internal memory and 7% from external memory. H/E operations are executing from internal

memory concurrently with PCI transactions. Initialization operations are executed from external memory.

Applies to MQFP package type.

Output pin capacitance is the capacitive load for any three-stated output pin.

Specifications subject to change without notice.

ADSP-2141L

SPECIFICATIONS

REV. 0

ADSP-2141L

DC SPECIFICATIONS PCI Bus Pins

K Grade

Parameter

Test Conditions

Min

Max

Unit

Hi-Level Input Voltage

1, 2

0.5 V

+ 0.5

Lo-Level Input Voltage

1, 2

0.5

0.3 V

Hi-Level Output Voltage

1, 3

OUT

= 500

0.9 V

Lo-Level Output Voltage

1, 3

OUT

= 1500

0.1 V

Hi-Level Input Current

0 < V

< V

Lo-Level Input Current

0 < V

< V

OZH

Three-State Leakage Current

0 < V

< V

OZL

Three-State Leakage Current

0 < V

< V

Input Pin Capacitance

AMB

= 25

CLK

PCI CLK Pin Capacitance

AMB

= 25

IDSEL

PCI IDSEL Pin Capacitance

AMB

= 25

Pin Inductance

NOTES

Bidirectional pins: MPLX_BUS [31:0}, MPLX14, MPLX710, MPLX12

Input only pins: MPLX_RESET, MPLX5, MPLX6, PCI_CLK, PCI_PAR, PCI_IRDY, PCI_STOP

Output only pins: MPLX11

Leakage currents include High-Z output leakage for bidirectional buffers with three-state outputs.

Lower capacitance of IDSEL (MPLX_5) input-only pin allows for nonresistive connection to Address/Data bus.

TIMING PARAMETERS

PCI Clock

(Guaranteed Over Operating Temperature and Digital Supply Range)

The ADSP-2141L is targeted for use in PCI add-on I/O slave card designs. It provides a glueless interface to the PCI bus. All bus
drivers are compliant with PCI interface electrical switching and drive capability specifications.

The ADSP-2141L does not implement the following signals:

LOCK, INTB, INTC, INTD, SBO, SDONE, CLKRUN, AD[64:32],

C/BE[7:4], REQ64, ACK64, PAR64.

Parameter

Min

Max

Unit

Timing Requirements:
t

CYC

CLK Cycle Time

100

HIGH

CLK High Time

LOW

CLK Low Time

CLK Slew Rate

V/ns

RST Slew Rate

mV/ns

NOTES

Rise and fall times are specified in terms of the edge rate measured in V/ns. This slew rate must be met across the minimum peak-to-peak portion of the waveform as
shown in Figure 8.

The minimum

RST slew rate applies only to the rising (deassertion) edge of the reset signal, and ensures that system noise cannot render an otherwise monotonic

signal to appear to bounce in the switching range.

0.2V

2V p-p

(

MINIMUM

)

0.3V

0.4V

0.5V

0.6V

LOW

HIGH

CYC

Figure 8. Clock Waveform

REV. 0

ADSP-2141L

CAPACITIVE LOADING

Figures 23 and 24 show the capacitive loading characteristics of
the ADSP-2141L.

 pF

RISE TIME (0.4V 2.4V) ns

T = +70 C
V

= 3.0V

100

150

200

250

300

Figure 23. Typical Output Rise Time vs. Load Capacitance,
C

(at Maximum Ambient Operating Temperature)

 pF

250

100

150

200

NOMINAL

VALID OUTPUT DELAY

OR HOLD ns

Figure 24. Typical Output Valid Delay or Hold vs. Load
Capacitance, C

(at Maximum Ambient Operating

Temperature)

TEST CONDITIONS
Output Disable Time

Output pins are considered to be disabled when they have
stopped driving and started a transition from the measured
output high or low voltage to a high impedance state. The out-
put disable time (t

DIS

) is the difference of t

MEASURED

and t

DECAY

as shown in the Output Enable/Disable diagram. The time is the
interval from when a reference signal reaches a high or low
voltage level to when the output voltages have changed by 0.5 V
from the measured output high or low voltage. The decay time,
t

DECAY

, is dependent on the capacitive load, C

, and the current

load, i

, on the output pin. It can be approximated by the fol-

lowing equation:

DECAY

· 0.5V

from which

DIS

MEASURED

DECAY

is calculated. If multiple pins (such as the data bus) are disabled,
the measurement value is that of the last pin to stop driving.

1.5V

INPUT

OUTPUT

1.5V

Figure 25. Voltage Reference Levels for AC Measure-
ments (Except Output Enable/Disable)

Output Enable Time

Output pins are considered to be enabled when they have made
a transition from a high-impedance state to when they start
driving. The output enable time (t

ENA

) is the interval from when

a reference signal reaches a high or low voltage level to when the
output has reached a specified high or low trip point, as shown
in the Output Enable/Disable diagram. If multiple pins (such as
the data bus) are enabled, the measurement value is that of the
first pin to start driving.

2.0V

1.0V

ENA

REFERENCE

SIGNAL

OUTPUT

DECAY

(MEASURED)

OUTPUT STOPS

DRIVING

OUTPUT STARTS

DRIVING

DIS

MEASURED

(MEASURED)

(MEASURED) 0.5V

(MEASURED) +0.5V

HIGH-IMPEDANCE STATE. TEST CONDITIONS CAUSE

THIS VOLTAGE LEVEL TO BE APPROXIMATELY 1.5V.

(MEASURED)

Figure 26. Output Enable/Disable

OUTPUT

PIN

50pF

+1.5V

Figure 27. Equivalent Device Loading for AC Measure-
ments (Including All Fixtures)

REV. 0

ADSP-2141L

Table IV. Thermal Ratings: MQFP Package

Rating Description

Symbol

Value (MQFP Still Air)

Value (MQFP 9500 fpm)

Thermal Resistance (Case to Ambient)

30.7

C/W

16.7

C/W

Thermal Resistance (Junction to Ambient)

C/W

Thermal Resistance (Junction to Case)

4.3

C/W

4.3

C/W

ENVIRONMENTAL CONDITIONS

The following figures assume a four-layer JEDEC printed circuit
board:

AMB

= T

CASE

(PD

)

CASE

= Case Temperature in

OUTPUT DRIVE CURRENTS

Figures 28 and 29 show typical I-V characteristics for the
output drivers of the ADSP-2141L. The curves represent the
current drive capability of the output drivers as a function of
output voltage.

SOURCE VOLTAGE V

100

40

100

3.5

SOURCE CURRENT mA

0.5

1.0

1.5

2.0

2.5

3.0

20

60

80

= 3.0V @ +70 C

4.0

= 3.3V @ +25 C

= 3.6V @ 0 C

= 3.0V @ +70 C

= 3.3V @ +25 C

= 3.6V @ 0 C

Figure 28. Typical Drive Currents (PCI Pins)

SOURCE VOLTAGE V

40

3.5

SOURCE CURRENT mA

0.5

1.0

1.5

2.0

2.5

3.0

20

60

80

= 3.0V @ +70 C

4.0

= 3.3V @ +25 C

= 3.6V @ 0 C

= 3.0V @ +70 C

= 3.3V @ +25 C

= 3.6V @ 0 C

Figure 29. Typical Drive Currents (Addr/Dbus/rd/wr Pins)

POWER DISSIPATION

Total power dissipation has two components: one due to inter-
nal circuitry and one due to the switching of external output
drivers. Internal power dissipation depends on the sequence in
which instructions execute and the data operands involved. See
I

DDIN

calculation in Electrical Characteristics section. Internal

power dissipation is calculated this way:

INT

= I

DDIN

The external component of total power dissipation is caused by
the switching of output pins. Its magnitude depends on:

the number of output pins that switch during each cycle (O)
the maximum frequency at which the pins can switch (f)
the load capacitance of the pins (C)
the voltage swing of the pins (V

The external component is calculated using:

EXT

= O

The load capacitance should include the processor's package
capacitance (C

). The frequency f includes driving the load

high and then back low.

REV. 0

ADSP-2141L

Example:

In an application where external data memory is used and no
other outputs are active, power dissipation is calculated as
follows:

Assumptions:

External data memory is accessed every cycle with 50% of the
address pins switching.

External data memory writes occur every other cycle with
50% of the data pins switching.

Each address and data pin has a 10 pF total load at the pin.

The application operates at V

= 3.3 V and t

= 25 ns.

Total Power Dissipation = P

INT

+ (C

f )

INT

= internal power dissipation from Power vs. Frequency

graphs (Figures 30 and 31).

f ) is calculated for each output:

# of

Pins

Address,

DMS

10 pF

3.3

40 MHz

34.8 mW

Data Output,

WR 9

10 pF

3.3

20 MHz

19.6 mW

10 pF

3.3

40 MHz

2.2 mW

CLKOUT

10 pF

3.3

20 MHz

4.4 mW

61.0 mW

Total power dissipation for this example is P

INT

+61 mW.

FREQUENCY MHz

940

POWER (P

INT

) mW

840

340

640

440

740

540

= 3.6V

= 3.3V

= 3.0V

706mW

554mW

431mW

823mW

649mW

509mW

POWER, INTERNAL

Figure 30. Power vs. Frequency

FREQUENCY MHz

POWER (P

IDLE

) mW

= 3.6V

= 3.3V

= 3.0V

68mW

51mW

41mW

74mW

53mW

43mW

POWER, IDLE

Figure 31. Power vs. Frequency

REV. 0

ADSP-2141L

Pin Configurations

For all multiplexed pins the active sense is determined by the mode selected.

Pin # Pin Name

Pin #

Pin Name

EMS

PCI_CLK

VDD

127

GND

169

GND

128

ADDR[0]

170

DATA[0]

GND

MPLX_BUS[30]

MPLX6

129

ADDR[1]

171

DATA[1]

ECLK

MPLX_BUS[29]

MPLX5

130

ADDR[2]

172

DATA[2]

ELOUT

MPLX_BUS[28]

MPLX_BUS[15]

131

ADDR[3]

173

DATA[3]

ELIN

MPLX_BUS[27]

MPLX_BUS[14]

132

VDD

174

VDD

EINT

VDD

MPLX_BUS[13]

133

ADDR[4]

175

GND

EBR

GND

MPLX_BUS[12]

134

ADDR[5]

176

DATA[4]

EBG

MPLX_BUS[26]

VDD

135

ADDR[6]

177

DATA[5]

MMAP

MPLX_BUS[25]

GND

136

ADDR[7]

178

DATA[6]

BMODE

MPLX_BUS[24]

MPLX_BUS[11]

137

ADDR[8]

179

DATA[7]

BUS_MODE

MPLX1

MPLX_BUS[10]

138

ADDR[9]

180

DATA[8]

BUS_SEL

MPLX_BUS[23]

MPLX_BUS[9]

139

ADDR[10]

181

DATA[9]

EE_SK

MPLX_BUS[22]

MPLX_BUS[8]

140

ADDR[11]

182

DATA[10]

EE_CS

VDD

141

ADDR[12]

183

DATA[11]

EE_DI

GND

100

GND

142

ADDR[13]

184

DATA[12]

EE_DO

MPLX_BUS[21]

101

MPLX4

143

GND

185

DATA[13]

VDD

MPLX_BUS[20]

102

MPLX_BUS[7]

144

ADDR[14]

186

DATA[14]

GND

MPLX_BUS[19]

103

MPLX_BUS[6]

145

ADDR[15]

187

DATA[15]

PF[7]/

INT_H

MPLX_BUS[18]

104

MPLX_BUS[5]

146

ADDR[16]

188

VDD

PF[6]

GND

105

MPLX_BUS[4]

147

ADDR[17]

189

GND

PF[5]

VDD

106

VDD

148

ADDR[18]

190

DATA[16]

PF[4]

VDD

107

GND

149

ADDR[19]

191

DATA[17]

PF[3]

GND

108

MPLX_BUS[3]

150

VDD

192

DATA[18]

PF[2]

MPLX_BUS[17]

109

MPLX_BUS[2]

151

ADDR[20]

193

DATA[19]

PF[1]

MPLX_BUS[16]

110

MPLX_BUS[1]

152

ADDR[21]

194

DATA[20]

PF[0]

MPLX2

111

MPLX_BUS[0]

153

ADDR[22]

195

DATA[21]

PWD

PCI_

IRDY

112

GND

154

ADDR[23]

196

VDD

PWDACK

VDD

113

CLKOUT

155

ADDR[24]

197

GND

114

VDD

156

ADDR[25]

198

DATA[22]

PCI_

STOP

115

GND

157

DT0

199

DATA[23]

BGH

MPLX10

116

158

TFS0

200

DATA[24]

IRQE

MPLX11

117

159

RFS0

201

DATA[25]

IRQL0

PCI_PAR

118

DMSH

160

DR0

202

DATA[26]

IRQL1

VDD

119

DMSL

161

SCLK0

203

DATA[27]

IRQ2

GND

120

PMS

162

DT1

204

DATA[28]

VDD

MPLX3

121

BMS

163

TFS1

205

DATA[29]

GND

MPLX7

122

CMS

164

RFS1

206

DATA[30]

MPLX_

RESET

MPLX9

123

IOMS

164

DR1

207

DATA[31]

MPLX12

MPLX8

124

VDD

166

SCLK1

208

ERESET

MPLX_BUS[31]

GND

125

CLKIN

167

GND

VDD

126

XTAL

168

VDD

REV. 0

ADSP-2141L

PINOUT

PCI Mode

208

207

206

205

204

203

202

201

200

199

198

197

196

195

194

193

192

191

189

188

187

186

185

184

183

182

181

180

190

179

178

177

175

174

173

172

171

170

176

169

168

167

165

164

163

162

161

160

159

158

157

166

102

103

104

152

153

154

155

150

151

156

148

149

143

144

145

146

141

142

140

147

138

139

134

135

136

137

132

133

130

131

128

129

125

126

127

123

124

121

122

120

117

118

119

116

114

115

112

113

107

108

109

110

111

105

106

MPLX_BUS/Pci_ad[24]

MPLX1/Pci_

cbe3

MPLX_BUS/Pci_ad[23]

MPLX_BUS/Pci_ad[22]

VDD

GND

MPLX_BUS/Pci_ad[21]

MPLX_BUS/Pci_ad[20]

MPLX_BUS/Pci_ad[18]

GND

VDD

GND

MPLX_BUS/Pci_ad[17]

MPLX_BUS/Pci_ad[16]

MPLX2/Pci_

cbe2

PCI_

IRDY

VDD

GND

PCI_

STOP

MPLX10/Pci_P

err

MPLX11/Pci_

serr

PCI_PAR

VDD

GND

MPLX3/Pci_

cbe1

MPLX7/Pci_

f
rame

MPLX9/Pci_

t
rdy

MPLX8/Pci_

devsel

GND

VDD

GND

MPLX6/Pci_

gnt

MPLX5/Pci_idsel

MPLX_BUS/Pci_ad[15]

MPLX_BUS/Pci_ad[14]

MPLX_BUS/Pci_ad[13]

MPLX_BUS/Pci_ad[12]

VDD

GND

MPLX_BUS/Pci_ad[11]

MPLX_BUS/Pci_ad[10]

MPLX_BUS/Pci_ad[9]

MPLX_BUS/Pci_ad[8]

VDD

GND

MPLX4/Pci_

cbe0

MPLX_BUS/Pci_ad[7]

MPLX_BUS/Pci_ad[6]

MPLX_BUS/Pci_ad[5]

PIN 1
IDENTIFIER

TOP VIEW

(Not to Scale)

ERESET

ADDR[25]

ADDR[24]
ADDR[23]
ADDR[22]
ADDR[21]
ADDR[20]

ADDR[19]
ADDR[18]

ADDR[14]

ADDR[17]
ADDR[16]
ADDR[15]

ADDR[13]
ADDR[12]

ADDR[11]
ADDR[10]

ADDR[6]

ADDR[3]
ADDR[2]
ADDR[1]

CLKIN
VDD

PMS
DMSL

VDD

MPLX_BUS/Pci_ad[1]

GND
VDD
MPLX_BUS/Pci_ad[4]

MPLX_BUS/Pci_ad[3]

MPLX_BUS/Pci_ad[2]

MPLX_BUS/Pci_ad[0]

GND

CLKOUT

RD
WR

GND

DMSH

BMS

CMS

XTAL

GND

ADDR[0]

ADDR[4]

ADDR[5]

ADDR[7]

ADDR[8]

ADDR[9]

VDD

GND

VDD

IOMS

EMS

GND

ECLK

ELOUT

ELIN

EINT

EBR

EBG

MMAP

BMODE

BUS_MODE

BUS_SEL

EE_SK
EE_CS

EE_DI

EE_DO

VDD

GND

PF[7]/

INT_H

PF[6]
PF[5]
PF[4]
PF[3]
PF[2]
PF[1]
PF[0]

PWD

PWDACK

BGH

IRQE

IRQL0
IRQL1

IRQ2

VDD

GND

MPLX_

RESET

/Pci_

rst

MPLX12/Pci_

req

MPLX_BUS/Pci_ad[31]

VDD

PCI_CLK

GND

MPLX_BUS/Pci_ad[30]
MPLX_BUS/Pci_ad[29]
MPLX_BUS/Pci_ad[28]
MPLX_BUS/Pci_ad[27]

VDD

GND

MPLX_BUS/Pci_ad[26]
MPLX_BUS/Pci_ad[25]

GND

VDD

GND

VDD

GND

VDD

GND

VDD

GND

SCLK1

ADSP-2141L

DATA[31]

DATA[30]

DATA[29]

DATA[28]

DATA[27]

DATA[26]

DATA[25]

DATA[24]

DATA[23]

DATA[22]

DATA[21]

DATA[20]

DATA[19]

DATA[18]

DATA[17]

DATA[16]

DATA[15]

DATA[14]

DATA[13]

DATA[12]

DATA[11]

DATA[10]

DATA[9]

DATA[8]

DATA[7]

DATA[6]

DATA[5]

DATA[4]

DATA[3]

DATA[2]

DATA[1]

DATA[0]

RFS

1 TFS1

DT1

SCLK0

DR0

RFS0

TFS0

DT0

PCI MODE

DR1

REV. 0

ADSP-2141L

PINOUT

2183-Mode

208

207

206

205

204

203

202

201

200

199

198

197

196

195

194

193

192

191

189

188

187

186

185

184

183

182

181

180

190

179

178

177

175

174

173

172

171

170

176

169

168

167

165

164

163

162

161

160

159

158

157

166

102

103

104

152

153

154

155

150

151

156

148

149

143

144

145

146

141

142

140

147

138

139

134

135

136

137

132

133

130

131

128

129

125

126

127

123

124

121

122

120

117

118

119

116

114

115

112

113

107

108

109

110

111

105

106

PIN 1
IDENTIFIER

TOP VIEW

(Not to Scale)

GND

ECLK

ELOUT

ELIN

VDD

GND

PWDACK

VDD

GND

EMS

EINT

EBR

EBG

MMAP

BMODE

BUS_MODE

BUS_SEL

EE_SK
EE_CS

EE_DI

EE_DO

PF[7]/

INT_H

PF[6]
PF[5]
PF[4]
PF[3]
PF[2]
PF[1]
PF[0]

PWD

BGH

IRQE

IRQL0
IRQL1

IRQ2

MPLX_

RESET

/RESET_1

MPLX12/FL2

MPLX_BUS/NC[31]

GND

MPLX_BUS/NC[30]
MPLX_BUS/NC[29]
MPLX_BUS/NC[28]
MPLX_BUS/NC[27]

VDD

GND

MPLX_BUS/NC[26]
MPLX_BUS/NC[25]

PCI_CLK

VDD

ADSP-2141L

ERESET

DATA[31]

DATA[30]

DATA[29]

DATA[28]

DATA[27]

DATA[26]

DATA[25]

DATA[24]

DATA[23]

DATA[22]

GND

VDD

DATA[21]

DATA[20]

DATA[19]

DATA[18]

DATA[17]

DATA[16]

GND

VDD

DATA[15]

DATA[14]

DATA[13]

DATA[12]

DATA[11]

DATA[10]

DATA[9]

DATA[8]

DATA[7]

DATA[6]

DATA[5]

DATA[4]

GND

VDD

DATA[3]

DATA[2]

DATA[1]

DATA[0]

GND

VDD

GND

SCLK1

DR1

RFS1

TFS1

DT1

SCLK0

DR0

RFS0

TFS0

DT0

ADDR[25]
ADDR[24]
ADDR[23]
ADDR[22]
ADDR[21]
ADDR[20]
VDD

ADDR[19]

ADDR[18]

ADDR[14]

ADDR[17]
ADDR[16]
ADDR[15]

GND

ADDR[13]
ADDR[12]
ADDR[11
]
ADDR[10]

ADDR[6]

ADDR[3]
ADDR[2]
ADDR[1]

CLKIN
VDD

PMS
DMSL

VDD

MPLX_BUS/IAD[1
]

GND
VDD
MPLX_BUS/IAD[4]

MPLX_BUS/IAD[3]

MPLX_BUS/IAD[2]

MPLX_BUS/IAD[0]

GND

CLKOUT

GND

DMSH

BMS

CMS

IOMS

XTAL

GND

ADDR[0]

VDD

ADDR[4]

ADDR[5]

ADDR[7]

ADDR[8]

ADDR[9
]

2183 MODE

VDD

GND

VDD

GND

VDD

GND

VDD

GND

VDD

GND

MPLX_BUS/NC[24]

MPLX1/NC

MPLX_BUS/NC[23]

MPLX_BUS/NC[22]

MPLX_BUS/NC[21]

MPLX_BUS/NC[20]

MPLX_BUS/NC[19]

MPLX_BUS/NC[18]

MPLX_BUS/NC[17]

MPLX_BUS/NC[16]

MPLX2/NC

PCI_

IRDY

PCI_

STOP

MPLX10/FL0

MPLX11/FL1

PCI_PAR

MPLX3/NC

MPLX7/IS

MPLX9/

IACK

MPLX8/IAL

MPLX6/

IWR

MPLX5/

IRD

MPLX_BUS/IAD[15]

MPLX_BUS/IAD[14]

MPLX_BUS/IAD[13]

MPLX_BUS/IAD[12]

VDD

GND

MPLX_BUS/IAD[11]

MPLX_BUS/IAD[10]

MPLX_BUS/IAD[9]

MPLX_BUS/IAD[8]

VDD

GND

MPLX4/NC

MPLX_BUS/IAD[7]

MPLX_BUS/IAD[6]

MPLX_BUS/IAD[5]

REV. 0

ADSP-2141L

PACKAGE DESCRIPTION
Package Details

The package shown below is a 208-lead metric quad flatpack. Measurements are listed in English and (metric). Because this package
is designed as a metric package, Analog Devices recommends that you use these measurements for any PCB layout.

OUTLINE DIMENSIONS

Dimensions shown in inches and (mm).

208-Lead Metric Plastic Quad Flatpack (MQFP)

(Nonhermetic)

208

157

156

105

104

TOP VIEW

(PINS DOWN)

0.020 (0.50)

BSC

1.256 (31.40)

1.248 (31.20) SQ

1.240 (31.00)

1.124 (28.10)

1.120 (28.00) SQ

1.116 (27.90)

0.011 (0.27)

0.009 (0.22)

0.007 (0.17)

LEAD PITCH

LEAD WIDTH

SEATING

PLANE

0.164 (4.10)

MAX

0.003 (0.08)

MAX LEAD

COPLANARITY

0.020 (0.50)
0.010 (0.25)

0.144 (3.59)

0.136 (3.39)

TYP

0.041 (1.03)

0.035 (0.88)

0.031 (0.78)

NOTE:
THE ACTUAL POSITION OF EACH LEAD IS WITHIN 0.003 (0.08) FROM ITS IDEAL
POSITION WHEN MEASURED IN THE LATERAL DIRECTION.

CENTER FIGURES ARE TYPICAL UNLESS OTHERWISE NOTED.

THE 208 LEAD MQFP IS A METRIC PACKAGE. ENGLISH DIMENSIONS PROVIDED
ARE APPROXIMATE AND MUST NOT BE USED FOR BOARD DESIGN PURPOSES

ORDERING GUIDE

Part Number

Ambient Temperature Range

Instruction Rate

Package Description

Package Option

ADSP-2141LKS-N1

C to +70

40 MHz

208-Lead MQFP

S-208

ADSP-2141LKS-E1

C to +70

40 MHz

208-Lead MQFP

S-208

NOTES

The

ADSP-2141LKS-N1 is an electrically equivalent, full function, production (non x-grade) version of the product described in this data sheet. (Full function =

Triple DES enabled, full 168-bit key length, full 2048-bit public key lengths, red keys allowed.)

The ADSP-2141LKS-E1 is an electrically equivalent, full function, production (non x-grade) version of the product d escribed in this data sheet except for the following:

Encryption: DES only, with maximum 56-bit key length. Triple DES is disabled.
Public Key Algorithms: Public Key Algorithms limited to 1024-bit max modulus. Red keys not allowed in hardware crypto context.

C365451/00 (rev. 0)

PRINTED IN U.S.A.

Ð­Ð»ÐµÐºÑ‚Ñ€Ð¾Ð½Ð½Ñ‹Ð¹ ÐºÐ¾Ð¼Ð¿Ð¾Ð½ÐµÐ½Ñ‚: SUMMIT-ICE

ÐÐ»ÐµÐºÑ‚Ñ€Ð¾Ð½Ð½Ñ‹Ð¹ ÐºÐ¾Ð¼Ð¿Ð¾Ð½ÐµÐ½Ñ‚: SUMMIT-ICE