ChipFind - документация

Электронный компонент: T8102

Скачать:  PDF   ZIP

Document Outline

Product Brief
June 2001
Ambassador
T8102
H.100/H.110 Interface and Time-Slot Interchanger
Introduction
The Agere Systems Inc.
Ambassador T8102 device
provides a complete solution for time-slot switching and
interconnect for the H.100/H.110 time-division multi-
plexed (TDM) buses. The T8102 device provides a
switching capacity of up to 512 local to H.100/H.110
connections. Local interfaces include sixteen serial
inputs and sixteen serial outputs and the H-bus inter-
face includes 32 bidirectional H.100/H.110 streams. The
T8102 bus interface is compatible with the
MVIP*-90, H-
MVIP, SC-Bus, and ECTF H.100/H.110 bus standards.
The
Ambassador T8102 is configured via a micropro-
cessor interface which can also read and write time-slot
and device data. Packaged in both a 208-pin SQFP and
a 217-ball BGA, the
Ambassador T8102 TSI device can
provide an economic solution for the computer tele-
phony market.
Features
s
Fully compatible to the T8100, T8100A, and T8105.
s
H.100/H.110 compliant interface; all mandatory sig-
nals.
s
Programmable connections to any of the 4096 time
slots on the H.100/H.110 bus.
s
Programmable switching between local time slots and
H.100/H.110 bus, up to 512 connections.
s
Up to 16 local serial inputs and 16 local serial outputs,
(2, 4, and 8 Mbits/s).
s
Microprocessor interface:
Intel
/
Motorola
modes.
s
Choice of frame integrity or minimum latency switch-
ing on a per-time-slot basis:
-- Frame integrity to ensure proper switching of wide-
band data.
-- Minimum latency switching to reduce delay in
voice channels.
s
Subrate switching of 1 bit, 2 bits, and 4 bits.
s
Two independently programmable groups of up to 12
framing signals each.
s
Programmable GPIO.
s
On-chip phase-locked loop (PLL) for H.100/H.110,
MVIP, or Dialogic's
SC-bus clock operation in master
or slave clock modes.
s
Serial TDM bus rate and format conversion between
most standard buses.
s
Optional 8-bit parallel input and/or 8-bit parallel output
for local TDM interfaces.
s
Includes 2 CT_NETREF pins.
s
Stratum 4/4E and AT&T 62411 MTIE compliant.
s
3.3 V supply with 5 V tolerant inputs and TTL-compat-
ible outputs.
s
JTAG/boundary-scan testing support.
s
208-pin, plastic SQFP package and 217-ball PBGA
package (industrial temperature range).
s
Evaluation boards available--PCI and
CompactPCI**
hot swap.
Applications
s
Computer telephony integrated solutions
s
Enhanced service platforms
s
WAN access devices
s
Telephony servers
s
PBXs
s
Wireless base station controllers
Refer to website www.agere.com/ambassador for addi-
tional information.
1755m
Figure 1. Basic Application of the T8102 as an
H.100/H.110 to Local TDM CT Switch
*
MVIP
is a trademark of Natural MicroSystems Corporation.
Intel
is a registered trademark of Intel Corporation.
Motorola
is a registered trademark of Motorola Inc.
Dialogic
is a registered trademark of Dialogic Corporation.
**
CompactPCI
is a registered trademark of the PCI Industrial
Computer Manufacturers Group.
H.
100
/H.
1
1
0
B
U
S
MICROPROCESSOR
H.
100
/H.
1
1
0
B
U
S
FRAMER
LO
CA
L TD
M
AGERE T8102
P
INT
E
RF
AC
E
IN
T
E
R
F
A
C
E
INTERFACE
512 H-BUS
TIME-SLOT SWITCH
2
Agere Systems Inc.
Product Brief
June 2001
H.100/H.110 Interface and Time-Slot Interchanger
Ambassador T8102
T8102 Block Diagram
5-6101(F)b
Figure 2. Block Diagram of the
Ambassador
...
...
...
H.100, H.110, H-
MVIP
INTERNAL
CLOCKS AND
STATE
COUNTER
S/P AND P/S CONVERTERS
512
LOCATION
DATA
SRAM
THREE 512
LOCATION
CONNECTION
CAMs
OUTPUT
LOGIC
AND P/S
CONVERT
INPUT
LOGIC
AND S/P
CONVERT
TIMING AND
CONTROL
MICROPROCESSOR
INTERFACE
FRAME GROUP
INTERFACE
LOGIC
FRAME
GROUPS
ADDR[1:0]
DATA[7:0]
P CONTROLS
MISC. I/O
CLOCKS AND REFS
INTERNAL
DATA
INTERNAL
ADDRESS
AND
CONTROL
LOCAL OUT
LOCAL IN
Subrate switching is the ability to switch part(s) of one
byte from one stream/time slot to another stream/time
slot. The parts are the following:
s
Nibbles (4 bits)--representing a 32 kbits/s subrate
s
Dibits (2 bits)--representing a 16 kbits/s subrate
s
Bits--representing an 8 kbits/s subrate
H.100/H.110 data transfers are always bytes. If subrate
switching is used, the T8102 constructs a byte consist-
ing of the subrate samples. The constructed byte may
contain any combination of nibbles, dibits, or bits.
In addition, individual data bits can be placed within a
byte along with don't care bits.
Onboard clock circuitry, including a digital phase-
locked loop, supports all H.100/H.110 clock modes
including
MVIP
and SC-bus compatibility clocks.
The local CHI interfaces support PCM rates of
2.048 Mbits/s, 4.096 Mbits/s, and 8.192 Mbits/s. The
Ambassador
T8102 has internal circuitry to support
either minimum latency or multi-time-slot frame integ-
rity. Frame integrity is a requisite feature for applica-
tions that switch wideband data (ISDN H-channels).
Minimum latency is advantageous in voice applica-
tions.
Agere Systems Inc.
3
Product Brief
June 2001
H.100/H.110 Interface and Time-Slot Interchanger
Ambassador T8102
Application Overview
5-6099F
Figure 3. CTI Call Center Application
DATABASE
ETHERNET
CTI SERVER
USER EXTENSIONS
ASR
FAX
T1/E1
ISDN
PCI
BUS
H.100/H.110 BUS
TO PSTN
T1
E1
ISDN
The integration of computers and telecommunications
has enabled a wide range of new communications
applications and has fueled an enormous growth in
communications markets. A key element in the devel-
opment of computer-based communications equip-
ment has been the addition of an auxiliary telecom bus
to existing computer systems. Most manufacturers of
high-capacity, computer-based telecommunications
equipment have incorporated some such telecom bus
in their systems. Typically, these buses and bus
interfaces are designed to transport and switch Nx64
kbits/s low-latency telecom traffic between boards
within the computer, independent of the computer's I/O
and memory buses. At least a half dozen of these
PC-based telecom buses emerged in the early 1990s
for use within equipment based on ISA/EISA and MCA
computers.
With the advent of the H.100/H.110 bus specification
by the Enterprise Computer Telephony Forum
(www.ectf.org), the computer-telephony industry has
agreed on a single telecom bus for use with PCI and
compact PCI computers. H.100/H.110 facilitates inter-
operation of components, thus providing maximum
flexibility to equipment manufacturers, value-added
resellers, system integrators, and others building com-
puter-based telecommunications applications.
Product Brief
June 2001
H.100/H.110 Interface and Time-Slot Interchanger
Ambassador T8102
Agere Systems Inc. reserves the right to make changes to the product(s) or information contained herein without notice. No liability is assumed as a result of their use or application.
Ambassador is a registered trademark and CelXpres and Phone-On-A-Chip are trademarks of Agere Systems Inc.
Copyright 2001 Agere Systems Inc.
All Rights Reserved
June 2001
PB01-090CTI (Replaces PN98-143NTNB)
For additional information, contact your Agere Systems Account Manager or the following:
INTERNET: http://www.agere.com
E-MAIL: docmaster@micro.lucent.com
N. AMERICA:
Agere Systems Inc., 555 Union Boulevard, Room 30L-15P-BA, Allentown, PA 18109-3286
1-800-372-2447, FAX 610-712-4106 (In CANADA: 1-800-553-2448, FAX 610-712-4106)
ASIA PACIFIC: Agere Systems Singapore Pte. Ltd., 77 Science Park Drive, #03-18 Cintech III, Singapore 118256
Tel. (65) 778 8833, FAX (65) 777 7495
CHINA: Agere Systems (Shanghai) Co., Ltd., 33/F Jin Mao Tower, 88 Century Boulevard Pudong, Shanghai 200121 PRC
Tel. (86) 21 50471212, FAX (86) 21 50472266
JAPAN: Agere Systems Japan Ltd., 7-18, Higashi-Gotanda 2-chome, Shinagawa-ku, Tokyo 141, Japan
Tel. (81) 3 5421 1600, FAX (81) 3 5421 1700
EUROPE: Data Requests: DATALINE: Tel. (44) 7000 582 368, FAX (44) 1189 328 148
Technical Inquiries: GERMANY: (49) 89 95086 0 (Munich), UNITED KINGDOM: (44) 1344 865 900 (Ascot),
FRANCE: (33) 1 40 83 68 00 (Paris), SWEDEN: (46) 8 594 607 00 (Stockholm), FINLAND: (358) 9 3507670 (Helsinki),
ITALY: (39) 02 6608131 (Milan), SPAIN: (34) 1 807 1441 (Madrid)
Ambassador Selection Guide
* For the T8102, local-to-local connections are achieved through L-H-L bus switching.
Below is a subset of Agere products that could complement the
Ambassador
family in your application.
Ambassador
Products
Features T8100A T8102 T8105 T8110 T8150
Number of Connections:
Local to local
1024 * 1024
4096 4096
Local to H-bus 256 512 512
Number of Local Data I/O 16I/16O 16I/16O 16I/16O 32 I/O 32 I/O
Local Data Rates Supported
2, 4, & 8
Mbits/s
2, 4, & 8
Mbits/s
2, 4, & 8
Mbits/s
2, 4, 8, & 16
Mbits/s
2, 4, 8, & 16
Mbits/s
Subrate Switching 1-, 2-, 4-bit 1-, 2-, 4-bit 1-, 2-, 4-bit 1-, 2-, 4-bit 1-, 2-, 4-bit
Intel
/
Motorola
Microprocessor Interface
Yes
Yes
Yes
Yes
Yes
32-bit PCI Interface --
--
--
Yes
--
PCI Minibridge -- -- -- Yes --
H-bus/L-bus to PCI Packet Switching -- -- -- Yes --
StarFabric
Interface
--
--
--
--
Yes
Package Type
208 SQFP
217 PBGA
208 SQFP
217 PBGA
208 SQFP
217 PBGA
272 PBGA 272 PBGA
Power Supply Voltage 3.3 V 3.3 V 3.3 V 3.3 V
3.3 V
1.5 V
Product Family
Description
Web Site
Analog Line Card Solutions
Complete integrated circuit line card solu-
tion. Products included are protection,
switches, SLIC, codec, and ringing.
www.agere.com/alc
CelXpres
TM
ATM Interconnect
Portfolio of backplane interface devices that
interconnect UTOPIA Level 1 or 2 to an ATM
cell bus.
www.agere.com/ATM
Phone-On-A-Chip
TM
VoIP Solutions
Product family targeted at the enterprise IP
phone market, but well suited for small office
gateways and consumer IP phones.
www.agere.com/phone_chip