0.200
+0.004
0
5.08
+0.10)
0)
(
0.250 0.005
(0.55 0.35)
0.310
(8.08)
0.180
(4.57)
TYP.
0.005
(1.05)
0.080
(2.03)
0.110
(2.99)
0.260
(0.10)
+0.010
-0.005
0.230
(0.05)
0.13
(0.32)
+0.705
-0.240
0.270 + 0.010
(5.99 + 0.25)
+0.022
-0.010
0.290 + 0.010
(7.57 + 0.25)
0.038 + 0.003
(0.97 + 0.08)
CRITICAL SURFACES
0.205
(6.73)
0.375
(9.53)
0.151 0.005
(3.84 0.13)
0.005 0.003
(0.13 0.08)
0.022 + 0.001
(0.56 + 0.03)
CLIP
RETAINER RING
0.260
+0.50)
-0.75)
(0.10
TYP. 61
+0.705)
-0.25)
0.025
(0.06
0
+0.25)
-0.13)
0.705
(0.73
TYP. 0X
0
0
120
TYP.
0X
T-1
3
/
4
(5 mm) Panel Mount Clip
and Retaining Ring
Technical Data
HLMP-0103
Description
The HLMP-0103 is a black plastic
mounting clip and retaining ring. It
is designed to panel mount Agilent
Solid State high profile T-1
3
/
4
size
lamps. This clip and ring
combination is intended for
installation in instrument panels
from 1.52 mm (0.060") to 2.67 mm
(0.105") thick. For panels greater
than 2.67 mm (0.105"),
counterboring may be needed to
the required thickness.
Mounting Instructions
1. Drill a 6.45/6.63 (0.254/0.261
in.) dia. hole in the panel.
Deburr but do not chamfer the
edges of the hole.
2. Press the panel clip into the hole
from the front of the panel.
3. Press the LED into the clip from
the back. Use blunt long nose
pliers to push on the LED. Do
not use force on the LED leads.
A tool such as a nut driver may
be used to press on the clip.
4. Slip a plastic retaining ring onto
the back of the clip and press
tight using tools such as two nut
drivers.
Note: Clip and retaining ring are also
available for T-1 package, from a non-
Agilent source. Please contact
Interconsal Association,
2584 Wyandotte Way, Mountain View, CA
for additional information.
Telephone: (408) 745-0161.
See Diagram that follows.
Package Dimensions
www.semiconductor.agilent.com
Data subject to change.
Copyright 2001 Agilent Technologies, Inc.
October 24, 2001
Obsoletes 5968-2678E
5988-4470EN
Mounting Diagram
PDF 
ZIP