Tape and Reel Options for T-1
3
/
4
(5 mm), T-1 (3 mm), LED Lamps
Technical Data
Features
Compatible with Radial Lead
Automatic Insertion
Equipment
Meets Dimensional Specifi-
cations of IEC Publication
286 and ANSI/EIA Standard
RS-468 for Tape and Reel
Reel Packaging Simplifies
Handling and Testing
T-1 and T-1
3
/
4
LED Lamps
Available Packaged on Tape
and Reel
5 mm (0.197 inch) Formed
Lead and 2.54 mm (0.100
inch) Straight Lead Spacing
Available
Description
T-1 and T-1
3
/
4
LED lamps are
available on tape and reel as
specified by the IEC Publication
286 and ANSI/EIA Standard
RS-468. The Option 01 lamp
devices have formed leads with
5 mm (0.197 inch) spacing for
automatic insertion into PC
boards by radial lead insertion
equipment. The Option 02 lamp
devices have straight leads with
2.54 mm (0.100 inch) spacing,
packaged on tape and reel for
ease of handling. T-1 lamps are
packaged 1800/reel. T-1
3
/
4
lamps
are packaged 1300/reel.
Ordering Information
To order LED lamps packaged on
tape and reel, include the
appropriate option code along
with the device catalog part
number. Example: to order the
HLMP-3300 on tape and reel with
formed leads (5 mm lead spacing)
order as follows: HLMP-3300
Option 01. Minimum order
quantities vary by part number.
Orders must be placed in reel
increments. Please contact your
local Agilent sales office or
franchised Agilent distributor for
a complete list of lamps available
on tape and reel.
LED lamps with 0.46 mm (0.018
inch) square leads with 5 mm
(0.197 inch) lead spacing are
recommended for use with
automatic insertion equipment.
Option 01
Option 02
Package
Quantity/Reel
Order Increments
T-1
1800
1800
T-1
3
/
4
1300
1300
Device Selection Guide
Option
Description
01
Tape and reel, 5 mm (0.197 inch) formed leads.
02
Tape and reel, 2.54 mm (0.100 inch) straight leads.
Caution: Agilent does not
recommend T-1 package, option
02 LEDs for auto-insertion. The
force exerted on the LED lead
frame during the cut and clinch
operation of auto-insertion may
result in cracking of the lamp
epoxy dome which results in
catastrophic failure. It is
suggested that insertion machine
compatibility be confirmed.
2
Absolute Maximum
Ratings and Electrical/
Optical Characteristics
The absolute maximum ratings,
mechanical dimension tolerances
and electrical/optical
characteristics for lamps
packaged on tape and reel are
identical to the basic catalog
device. Refer to the basic data
sheet for the specified values.
Notes:
1. Minimum leader length at either end of
tape is 3 blank part spaces.
2. Silver saver paper is used as the
interlayer for silver plated lead devices.
3. The maximum number of consecutive
missing lamps is 3.
4. In accordance with EIA and IEC specs,
the anode lead leaves the reel first.
5. Drawings apply to devices with
0.46 mm (0.018 inch) square leads
only. Contact Agilent Sales Office for
dimensions of 0.635 mm (0.025 inch)
square lead devices.
Tape and Reel LED Configurations
Figure 1. T-1 High Profile Lamps, Option 01.
Figure 2. T-1 High Profile Lamps, Option 02.
Figure 3. T-1 Low Profile Lamps, Option 01.
Figure 4. T-1 Low Profile Lamps, Option 02.
3
Tape and Reel LED Configurations (cont.)
Figure 5. T-1
3
/
4
High Profile Lamps, Option 01.
Figure 6. T-1
3
/
4
High Profile Lamps, Option 02.
Figure 8. T-1
3
/
4
Low Profile Lamps, Option 02.
Figure 7. T-1
3
/
4
Low Profile Lamps, Option 01.
4
Dimensional Specifications for Tape and Reel
Item
Option 01
02
Symbol
Specification
Notes
T1 High Profile
Body Height
A1
4.70 (0.185)
4.19 (0.165)
Body Diameter
D1
3.18 (0.125)
2.67 (0.105)
Component Height
H1
25.7 (1.012) Max.
Tl Low Profile
Body Height
A2
3.73 (0.147)
3.23 (0.127)
Body Diameter
D2
3.05 (0.120)
2.79 (0.110)
Component Height
H2
24.7 (0.974) Max.
T1
3
/
4
High Profile
Body Height
A3
9.19 (0.362)
8.43 (0.332)
Body Diameter
D3
5.08 (0.200)
4.32 (0.170)
Component Height
H3
30.2 (1.189) Max.
T1
3
/
4
Low Profile
Body Height
A4
6.35 (0.250)
5.33 (0.210)
Body Diameter
D4
5.08 (0.200)
4.32 (0.170)
Component Height
H4
27.4 (1.079) Max.
Lead Wire Thickness
d
0.45 (0.018)
Square Leads
Pitch of Component
P
13.7 (0.539)
11.7 (0.461)
Feed Hole Pitch
P
0
12.9 (0.508)
Cumulative error:
12.5 (0.492)
1.0 mm/20 pitches
Feed Hole Center to Lead Center
P1
4.55 (0.179)
Measure at crimp
3.15 (0.124)
bottom 5.78/3.68
(0.227/0.1448) for
straight leads
Hole Center to Component Center
P2
7.35 (0.289)
5.35 (0.211)
Lead to Lead Distance
F
5.40 (0.213)
2.54 (0.100) nominal
4.90 (0.193)
for straight leads
Component Alignment, Front-rear
h
0
1.0 (0.039)
Figure 9
Tape Width
W
18.5 (0.728)
17.5 (0.689)
Hold Down Tape Width
W
0
15.3 (0.602)
12.0 (0.472)
Hole Position
W1
9.75 (0.384)
8.50 (0.335)
5
Item
Option 01
02
Symbol
Specification
Notes
Hold Down Tape Position
W2
2.54 (0.100) Max.
Height of Component from Hole Center
H
21.0 (0.827)
20.0 (0.787)
Lead Clinch Height
H
O
16.5 (0.650)
15.5 (0.610)
Feed Hole Diameter
D
O
4.20 (0.165)
3.80 (0.150)
Total Tape Thickness
t
0.90 (0.035)
Paper thickness:
0.50 (0.020)
0.55 (0.022)
0.45 (0.018) Figure 9
Length of Snipped Lead
L
11.0 (0.433) Max.
Lead Length Under Hold Down Tape
I1
14.5 (0.571) Min.
Note:
1. Dimensions in millimetres (inches) maximum/minimum.
Dimensional Specifications for Tape and Reel (cont.)
Figure 11. Reel Configuration and Labeling.
Figure 9. Front to Rear Alignment and
Tape Thickness, Typical All Device
Types.
Figure 10. Device Retention Tests and Specifications.
PDF 
ZIP