TO ORDER CALL 1-888-9-AIMTEC
AM10E Series
10 watt dc-dc converters
FULL SMD TECHNOLOGY
WIDE 2:1 INPUT RANGE
HIGH EFFICIENCY UP TO 90%
LOW PROFILE METAL PACKAGE
INPUT/OUTPUT ISOLATION: 1500VDC
OPERATING TEMPERATURE: -40C ... +85C
CONTINUOUS SHORT CIRCUIT PROTECTION
PIN-COMPATIBLE WITH MULTIPLE MANUFACTURERS
GENERAL DESCRIPTION
ELECTRICAL SPECIFICATIONS
All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated.
Our AM10E series is a family of cost effective 10W
single and dual output DC/DC converters. These conver-
ters combine nickel-coated copper package with high
performance features such as 1500VDC input/output iso-
lation voltage, continuous short circuit protection with
automatic restart and tight line / load regulation. Wide
range devices operate over 2:1 input voltage range pro-
viding stable output voltage. Input voltages of 12, 24 and
48VDC with output voltages of 3.3, 5, 7.2, 9, 12, 15, 18,
24, 3.3, 5, 7.2, 9, 12, 15, 18 or 24VDC. High
performance features include high efficiency operation
up to 90% and output voltage accuracy of 1% maxi-
mum. All models are packaged in a low profile 50.8 x
25.4 x 10.16mm nickel-coated copper case. Operation is
specified over the full operating temperature range of -
40C to +85C with no derating required. Cooling is by
free-air convection.
MTBF: > 800,000 hrs @ 25C (MIL-HDBK-217F)
Specifications are subject to change without notification.
Isolation Specifications:
Rated voltage (60 sec)
1500VDC
Resistance >
1000MOhm
Capacitance 500pF,
typ.
Output Specifications:
Voltage accuracy
1%, max.
Voltage balance (Dual Output) 1%
Ripple and noise
(at 20MHz BW)
100mVp-p, max.
Short circuit protection
Continuous
Short circuit restart
Automatic
Line voltage regulation
0.5%, max.
Load voltage regulation
0.5%, max.
Temperature coefficient
0.02%/C, typ.
Over load protection
130%, typ. 100% load
Input Specifications:
Voltage range
12VDC, 9~18VDC
24VDC, 18~36VDC
48VDC, 36~72VDC
Filter
Capacitor
Environmental Specifications:
Operating temperature
(ambient)
-40C ... +85C
Storage temperature
-40C ... +125C
Case Temperature
+100C, max.
Derating
None required
Humidity (non-condensing)
Up to 90%
Cooling
Free-air Convection
Physical Specifications:
Dimensions 50.8x25.4x10.16mm
2.00x1.00x0.40inches
Weight 46g
Case material
Nickel-Coated Copper
General Specifications:
Efficiency
83% to 90%
Switching frequency
200KHz, typ. 100% load
DC-DC CONVERTERS
Continued on next page
Picture
Available
Soon
TO ORDER CALL 1-888-9-AIMTEC
AM10E Series
DC-DC CONVERTERS
Input Voltage
Ouput Voltage
Ouput Current max.
AM10E-1203D
AM10E-1205D
AM10E-1207D
AM10E-1209D
AM10E-1212D
AM10E-1215D
AM10E-1218D
AM10E-1224D
AM10E-2403D
AM10E-2405D
AM10E-2407D
AM10E-2409D
AM10E-2412D
AM10E-2415D
AM10E-2418D
AM10E-2424D
AM10E-4803D
AM10E-4805D
AM10E-4807D
AM10E-4809D
AM10E-4812D
AM10E-4815D
AM10E-4818D
AM10E-4824D
9 - 18VDC
18 - 36VDC
36 - 72VDC
3.3VDC
5VDC
7.2VDC
9VDC
12VDC
15VDC
18VDC
24VDC
3.3VDC
5VDC
7.2VDC
9VDC
12VDC
15VDC
18VDC
24VDC
3.3VDC
5VDC
7.2VDC
9VDC
12VDC
15VDC
18VDC
24VDC
1250mA
1000mA
690mA
555mA
416mA
333mA
270mA
208mA
1250mA
1000mA
690mA
555mA
416mA
333mA
270mA
208mA
1250mA
1000mA
690mA
555mA
416mA
333mA
270mA
208mA
Models
MODELS
Dual output
PDF 
ZIP