80
TO ORDER CALL 1-888-9-AIMTEC
AM15EW-C Series
15 watt dc-dc converters
POWER MODULES FOR PCB MOUNTING
4:1 WIDE INPUT RANGE
REGULATED OUTPUT
LOW RIPPLE & NOISE
REMOTE ON/OFF CONTROL (OPTIONAL)
GENERAL DESCRIPTION
ELECTRICAL SPECIFICATIONS
All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated.
Our AM15EW-C series is a family of cost effective 15W single
output DC-DC converters. These converters are shielded on
all six sides and encapsulated with a nickel-coated copper
with a non-conductive base and dimensions of
50.8x25.4x10.5mm. The high performance features of
our AM15EW-C components include short circuit protec-
tion with current limit auto recovery, tight line regulation
and a high efficiency operation coefficient up to 83%.
These wide range devices operate over 4:1 input voltage
range, providing a continuously stable output voltage.
Ten models operate from an input voltage range of 24 &
48VDCproducing output voltages of 3,3, 5, 12, 15 &
24VDC. The normal operation is specified over the full
operating temperature range of -25C to +71C with no
derating required. Cooling is done by free air convection.
MTBF: > 800,000 hrs (MIL-HDBK-217F, Ground Benign, t=+25C)
Specifications are subject to change without notification
Isolation Specifications:
Rated voltage
1500VDC
Resistance
>1000 Mohms
Capacitance
1000pF
Output Specifications:
Voltage accuracy
2%, max.
Ripple
<0.2% Vout +20mVmax (Vp-p)
Noise
<0.5% Vout +50mVmax (Vp-p)
Short circuit protection
Current limit, auto-recovery
Over current protection
Works over 120% of rating
and recovers automatically
Over voltage protection Zener diode clamp protection
Line regulation (HL-LL) 0.5%, typ.
Load regulation (10-100%) 1%, typ.
Temperature coefficient 0.02%/C, typ.
Input Specifications:
Voltage range
24VDC, 9~36VDC
48 VDC, 18~75VDC
Filter
p
(Pi) Network
Environmental Specifications:
Operating temperature
-25C ...+71C
Storage temperature
-55C ...+105C
Case temperature
+95C, max.
Humidity (non-condensing)
Up to 95%
Cooling
Free-air convection
Physical Specifications:
Dimensions
50.8x25.4x10.5mm
2.0x1.0x0.413inches
Weight
32g
Case material
Nickel-Coated Copper with
Non-Conductive base,
six sides' shielded
General Specifications:
Efficiency
79% to 83%
Switching frequency
300KHz, typ. 100% load
DC-DC CONVERTERS
Continued on next page
PDF 
ZIP