87
VISIT US AT WWW.AIMTEC.CA
DC-DC CONVERTERS
Continued on next page
AM30K-C Series
30 watt dc-dc converters
POWER MODULES FOR PCB MOUNTING
SIX-SIDED CONTINUOUS SHIELD
HIGH EFFICIENCY
STANDARD PACKAGE
GENERAL DESCRIPTION
ELECTRICAL SPECIFICATIONS
All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated.
Our AM30K-C series is a family of cost effective 30W single out-
put DC-DC converters. These converters are shielded on all six
sides and encapsulated with a nickel-coated copper with a non-con-
ductive base and dimensions of 50.8x40.64x10.8mm. The high
performance features of our AM30K-C components include short
circuit protection with hiccup auto recovery, tight line regulation
and a high efficiency operation coefficient up to 89%.
Seven models operate from an input voltage of 48VDC
producing output voltages of 1.8, 2.5, 3.3, 5, 12, 15 &
24VDC. The normal operation is specified over the full
operating temperature range of -25C to +71C with no
derating required. Cooling is done by free air convection.
MTBF: > 550,000 hrs (MIL-HDBK-217F, Ground Benign, t=+25C)
Specifications are subject to change without notification
Isolation Specifications:
Rated voltage
1500VDC
Resistance
>1000 Mohms
Capacitance
1000pF
Output Specifications:
Voltage accuracy
1%, max.
Ripple
<0.2% Vout +20mVmax (Vp-p)
Noise
<0.5% Vout +50mVmax (Vp-p)
Short circuit protection
Hiccup, auto-recovery
Over current protection
Works over 120% of rating
and recovers automatically
Over voltage protection Zener diode clamp protection
Line regulation (HL-LL) 0.5%, typ.
Load regulation (10-100%)1%, typ.
Temperature coefficient 0.02%/C, typ.
Input Specifications:
Voltage range
48 VDC, 36~75VDC
Filter
p
(Pi) Network
Environmental Specifications:
Operating temperature
-25C ...+71C
Storage temperature
-55C ...+105C
Case temperature
+95C, max.
Humidity (non-condensing)
Up to 95%
Cooling
Free-air convection
Physical Specifications:
Dimensions
50.8x40.64x10.8mm,
2.0x1.6x0.43inches
Weight
58g
Case material
Nickel-Coated Copper with
Non-Conductive base,
six sides' shielded
General Specifications:
Efficiency
83% to 89%
Switching frequency
400KHz, typ. 100% load
88
TO ORDER CALL 1-888-9-AIMTEC
DC-DC CONVERTERS
AM30K-C Series
MODELS
Single output
Models
Input Voltage
Ouput Voltage
AM30K-4801SC
1.8VDC
6000mA
AM30K-4802SC
2.5VDC
6000mA
AM30K-4803SC
3.3VDC
6000mA
AM30K-4805SC
36VDC-75VDC
5VDC
6000mA
AM30K-4812SC
12VDC
2500mA
AM30K-4815SC
15VDC
2000mA
AM30K-4824SC
24VDC
1250mA
OUTLINE DIMENSIONS & PIN CONNECTIONS
AM30K-C Series
AM30K-C Series
AM30K-C Series
AM30K-C Series
AM30K-C Series
MECHANICAL DIMENSION (Top View)
DERATING
BLOCK DIAGRAM
TRIMMING
Ouput Current max.
Single
1
On/Off Control (Optional)
2
-V Input
3
+V Input
4
Trim
5
-V Output
6
+V Output
Pin
PDF 
ZIP