Rated Rated
Part Output
Output
Overall
Overall
Ripple
Number
Voltage Current Regulation Regulation
Noise
Efficiency
ADP35WA12.0/
12 V
2.6 A
0~2.9 A
11~13 V
450 mVpp
83%
ADP35WC12.0
ADP35WA13.5/
13.5 V
2.5 A
0~2.6 A
12.5~14.5 V 400 mVpp
82%
ADP35WC13.5
ADP35WA15.0/
15 V
2.3 A
0~2.3 A
14~16 V
350 mVpp
84%
ADP35WC15.0
ADP35WA16.0/
16 V
2.2 A
0~2.2 A
15~17 V
300 mVpp
83%
ADP35WC16.0
Single Output, 35 Watt, Universal AC-DC Power Supplies
The ADP 35WA and 35WC Series are light, compact, and
efficient power supplies. These supplies are ideal for a wide
range of limited space applications from notebook
computers to industrial instrumentation. The ADP Series
quietly delivers continuous power, while complying with
international safety standards. The ADP Series are enclosed
in a modern molded plastic case.
Features
High Efficiency 82% to 84% Nominal
Ultra Miniature Size, 100mm x 63mm x 27mm
Light Weight, 250g
Universal Input, 90 to 265 Vac
Meets FCC & CISPR Level "B" EMI Requirements
Tight Voltage Regulation
Over-Current Protected
Meets Worldwide Safety Standards
WA Series Constant Voltage, Constant Current Type
WC Series Constant Voltage, Current Foldback Type
3100 Tower Boulevard
5th Floor University Tower
Durham, NC 27707
(919) 402-1320 Fax: (919) 402-8540
ADP 35WA/35WC Series
Note: 13.5 V Output available as 3 pin input option.
INPUT
Input Voltage
Universal, 90 to 265 V
Input Frequency
47 to 63 Hz
Input Current
1.0 A or less
Inrush Current
100 A or less at cold start
Leakage Current
100 A max (240 V, 50 Hz)
Efficiency
82% to 84% nominal, full load
AC Turn-on Time
1.3 sec. at 90 V
OUTPUT
Output Power
35 W
Over-Current Protection
Yes, Constant current
Over-Voltage Protection
Yes, Shut down
Thermal Protection
Yes, Shut down
Reset Time after Shutdown 32 sec. at 240 V
ENVIRONMENTAL
Operating Temperature
0~+40C
Storage Temperature
-20~+80C
Cooling
Free air convection
Storage Humidity
10~90%
Operation Humidity
20~80%
Specifications subject to change without notice.
ADP 35WA/35WC Series
SPECIFICATIONS
VIBRATION
Frequency
5~100 Hz
Amplitude
25mm (max)
Acceleration
0.5 G
Sweep Time
60 sec.
Direction
X,Y, Z
Vibration Time
10 min.
SHOCK
Storage
Passes lifting the unit and
dropping it from 1 meter high
to an oak board.
3 times, with no damage
Operation
Shock acceleration: 2.0 G,
Sine wave: 10 ms
Direction of force: X,Y, Z
Apply 10 times in 1 sec. intervals
EMI Regulations
VCCI Class-II
FCC Class-B (115 V)
CISPR22 Class-B (230 V)
Safety Standards
Dentori
UL 1950, UL 1310
CSA No. 950 (WA), C-UL No.1950(WC)
TUV EN60950
Hi-Pot Test
P-S 3 kv 1 min. (10 mA or less)
Insulation Resistance
P-S DC 500 V, 50 M
or more
13.5 mm
11.5 mm
27 mm
13 mm
20.5 mm
100 mm
63 mm
16.5 mm
2.5 mm
28 mm
9.5 mm
2.1 mm
5.5 mm
+50
-0
1800 mm
PDF 
ZIP