ChipFind - документация

Электронный компонент: ASM5I9772AG-52-ER

Скачать:  PDF   ZIP
www.docs.chipfind.ru
background image
June 2005
ASM5I9772A
rev 0.3
Alliance Semiconductor
2575, Augustine Drive
Santa Clara, CA Tel: 408.855.4900 Fax: 408.855.4999 www.alsc.com
Notice: The information in this document is subject to change without notice.
2.5V or 3.3V, 200-MHz, 12-Output Zero Delay Buffer
Features
Output frequency range: 8.33 MHz to 200 MHz
Input frequency range: 6.25 MHz to 125 MHz
2.5V or 3.3V operation
Split 2.5V/3.3V outputs
2% max Output duty cycle variation
12 clock outputs: drive up to 24 clock lines
One
feedback
output
Three reference clock inputs: crystal or LVCMOS
300pS max output-output skew
Phase-locked loop (PLL) bypass mode
`SpreadTrak'
Output
enable/disable
Pin-compatible with CY29772, MPC9772 and MPC972
Industrial temperature range: 40C to +85C
52 pin 1.0 mm TQFP package
RoHS
Compliance
Functional Description
The ASM5I9772A is a low-voltage high-performance
200 MHz PLL-based zero delay buffer, designed for high-
speed clock-distribution applications.
The ASM5I9772A features one on-chip crystal oscillator
and two LVCMOS reference clock inputs and provides 12
outputs partitioned in three banks of four outputs each.
Each bank divides the VCO output per SEL(A:C) settings,
see Functional Table.
These dividers allow output to input ratios of 8:1, 6:1, 5:1,
4:1, 3:1, 8:3, 5:2, 2:1, 5:3, 3:2, 4:3, 5:4, 1:1, and 5:6. Each
LVCMOS-compatible output can drive 50 series or
parallel-terminated transmission lines. For series-
terminated transmission lines, each output can drive one or
two traces, giving the device an effective fanout of 1:24.
The PLL is ensured stable given that the VCO is configured
to run between 200 MHz and 500 MHz. This allows a wide
range of output frequencies from 8 MHz to 200 MHz. For
normal operation, the external feedback input, FB_IN, is
connected to the feedback output, FB_OUT. The internal
VCO is running at multiples of the input reference clock set
by the feedback divider, see Frequency Table.
When PLL_EN is LOW, PLL is bypassed and the reference
clock directly feeds the output dividers. This mode is fully
static and the minimum input clock frequency specification
does not apply.

Block Diagram

















Sync
Frz
Sync
Frz
Sync
Frz
Sync
Frz
Sync
Frz
Sync
Frz
D Q
D Q
D Q
D Q
D Q
D Q
D Q
0
1
/2
Output Disable
Circuitry
12
Power-On
Reset
0
1
VCO
Phase
Detector
LPF
0
1
/4,/6,/8,/12
/4,/6,/8,/10
/2/4,/6,/8
/4,/6,/8,/10
Sync Pulse
Data Generator
2
2
2
2
XIN
XOUT
VCO_SEL
PLL_EN
REF_SEL
TCLK0
TCLK1
TCLK_SEL
FB_IN
FB_SEL2
MR#/OE
SELA(0,1)
SELB(0,1)
SELC(0,1)
FB_SEL(0,1)
SCLK
SDATA
INV_CLK
SYNC
FB_OUT
QC3
QC2
QC1
QC0
QB3
QB2
QB1
QB0
QA3
QA2
QA1
QA0
background image

June 2005
ASM5I9772A
rev 0.3
2.5V or 3.3V, 200-MHz, 12-Output Zero Delay Buffer
2 of 15
Notice: The information in this document is subject to change without notice.

Pin Configuration




AVSS
MR#/OE
SCLK
FB_SEL2
PLL_EN
REF_SEL
TCLK_SEL
TCLK0
TCLK1
XIN
SDATA
VCO
_
SEL
VSS
QA
0
V
DDQA
QA
1
V
SS
QA
2
V
DDQA
QA
3
SELA0
SELA1
INV_CL
K
VSS
QC3
VDDQC
QC2
SELC1
SELC0
QC1
VDDQC
QC0
VSS
FB_IN
QB3
VDDQB
QB2
VSS
QB1
VDDQB
QB0
VSS
VSS
FB_OUT
1
2
4
3
5
6
7
8
9
10
11
52 51 50 49 48 47 46 45 44 41
40
14 15 16 17 18 19 20 21 22 23 24
39
38
37
36
35
34