Sales Desk USA: Voice: (800) 544-2414 Fax: (315) 432-9121
Sales Desk Europe: Voice: (+44) 23 92 232392 Fax: (+44) 23 92 251369
Hybrid Couplers
3 dB, 90
Features
Welded Tab Mount
2-Way Power Split
Reliable Performance
Handles 50 Watts
Applications
Microstrip Circuits
Divider/Combiners
Switch Networks
Balanced Detectors
Antenna Feeds
Outline Drawing
Electrical Specifications
Caseless Components
4.1.56
Model 11270-3
Frequency
Isolation
Insert. Loss
VSWR
GHz
dB Min/Typ
dB Max
Max : 1
2.0 - 6.0
15/18
0.80
1.50/1.25
Amp. Bal.
Phase Bal.
Power
dB Max
Degrees Max
Ave. CW Watts
0.60
3.5
50
Notes: Electrical specifications apply only with properly designed test fixtures. Testing is done at ambient temper-
ature only. Sample testing is performed to MIL-STD-105, Level 2, AQL 1.0. Test includes coupling, amplitude
balance, insertion loss and isolation. If your application requires additional testing, consult Anaren Power rating
applies when solder tab/coupler interface has been conformally coated. Impedance: 50 ohms. Meets MIL-E-5400
Class 3 requirements. Additional screening available for military and space applications.
Electrical and Mechanical Specifications subject to change without notice.
NOTES:
1. DIMENSIONS ARE IN INCHES
OVER (MILLIMETERS)
2. MARKING SHALL BE IN ACCOR-
DANCE WILL MIL-STD-130
3. FINISH: CHEMICAL CONVERSATION
COAT (CLEAR) PER MIL-C-5541,
CLASS 1A
4. SOLDER TAB:
4.1 MATERIAL:FLAT WIRE,
COPPER-061, PER ASTM-B-272
4.2 FINISH: GOLD PLATE
PER MIL-G-45204,
TYPE 3, GRADE A, CLASS
00. OVER NICKEL SULFAMATE
FLASH PER Q-N-290, CLASS I.
PDF 
ZIP