Sales Desk USA: Voice: (800) 544-2414 Fax: (315) 432-9121
Sales Desk Europe: Voice: (+44) 23 92 232392 Fax: (+44) 23 92 251369
Features
Welded Tab Mount
4-Way Power Split
Reliable Performance
Handles 250 Watts
Combiner/Dividers
4-Way
Caseless Components
Outline Drawing
Electrical Specifications
4.3.3
Model 40110
Frequency
Isolation
Insert. Loss
VSWR
MHz
dB Min/Typ
dB Max
Max : 1
225 - 400
20
0.50
1.20
Amp. Bal.
Phase Bal.
Power
dB Max
Degrees Max
Ave. CW Watts
0.90
3.0
250
Notes: Impedance: 50 ohms nominal. Meets MIL-E-5400 Class 3 requirements. Additional screening available for
military and space applications.Electrical specifications apply only properly designed test fixtures. Testing is done
at ambient temperature only. Sample testing is performed to MIL-Std-105, Level 2, AQL 1.0. Test includes
coupling, amplitude balance, insertion loss and isolation. If your application requires additional testing, consult
Anaren Power rating applies when solder tab/coupler interface has been conformally coated.
Electrical and Mechanical Specifications subject to change without notice.
NOTES:
1. Marking:
Marking shall be in accordance with MIL-STD-130
2. Finish:
Chemical conversion coat (clear) per MIL-C-5541, class 1A
3. Solder tab info:
3.1 Material: Flat wire, copper-061, per AST-B-272
3.2 Finish:
Gold plate per MIL-G-45204, Type 3,
Grade A, Class 00, over nickel sulfamate
flash per QQ-N-290. Class 1.
4. Weight:
.90 oz. Max
5. Dimensions:
Inches over (millimeters)
Applications
Microstrip Circuits
LO Networks
Divider/Combiners
Switch Networks
Balanced Detectors
Antenna Feeds
PDF 
ZIP