Sales Desk USA: Voice: (800) 544-2414 Fax: (315) 432-9121
Sales Desk Europe: Voice: (+44) 23 92 232392 Fax: (+44) 23 92 251369
Combiner/Dividers
4-Way
Model 40170
Caseless Components
4.3.4
Features
Welded Tab Mount
4-Way Power Split
Reliable Performance
Handles 100 Watts
Outline Drawing
Electrical Specifications
Frequency
Isolation
Insert. Loss
VSWR
GHz
dB Min/Typ
dB Max
Max : 1
0.7 - 1.4
18
0.60
1.30
Amp. Bal.
Phase Bal.
Power
dB Max
Degrees Max
Ave. CW Watts
1.00
3.0
100
NOTES:
1. Marking:
Marking shall be in accordance with MIL-STD-130
2. Finish:
Chemical conversion coat (clear) per MIL-C-5541, class 1A
3. Solder tab info:
3.1 Material: Flat wire, copper-061, per AST-B-272
3.2 Finish:
Gold plate per MIL-G-45204, Type 3,
Grade A, Class 00, over nickel sulfamate
flash per QQ-N-290. Class 1.
4. Weight:
.90 oz. Max
5. Dimensions:
Inches over (millimeters)
Applications
Microstrip Circuits
LO Networks
Divider/Combiners
Switch Networks
Balanced Detectors
Antenna Feeds
Notes: Impedance: 50 ohms nominal. Meets MIL-E-5400 Class 3 requirements. Additional screening available for
military and space applications.Electrical specifications apply only properly designed test fixtures. Testing is done
at ambient temperature only. Sample testing is performed to MIL-Std-105, Level 2, AQL 1.0. Test includes
coupling, amplitude balance, insertion loss and isolation. If your application requires additional testing, consult
Anaren Power rating applies when solder tab/coupler interface has been conformally coated.
Electrical and Mechanical Specifications subject to change without notice.
PDF 
ZIP