A
PLUS MAKE YOUR PRODUCTION A-PLUS
AVXX32E -A SERIES
DATA SHEET
A
PLUS INTEGRATED CIRCUITS INC.
Address:
3 F-10, No. 32, Sec. 1, Chenggung Rd., Taipei,
Taiwan 115, R.O.C.
(115) 32 3 10.
TEL: 886-2-2782-9266
FAX: 886-2-2782-9255
WEBSITE :
http: //www.aplusinc.com.tw
Sales E-mail:
sales@aplusinc.com.tw
Technology E-mail:
service@aplusinc.com.tw
AVXX32E -A SERIES
3, 7, 14 Seconds Complicate Pure Speech
Features
Operating voltage: 2.4V~5.0V
One single-key can implement play-all,
play-next and random function.
Maximum play count is 16.
Each input can implement looping function.
Single-key input can be last-key priority for
stand-alone input or first-key priority.
Each input trigger can select trigger mode: (For
OKY, TG0, TG1, TG3) Edge/Level, Hold/Unhold,
Retrigger/Irretrigger.
Each input trigger can select its own debounce
time:
Fast debounce: < 200us;
Slow debounce: ~16ms (S.R.=6.0kHz)
Support bouncing trigger solution for retrigger
application. (Second trigger force to retrigger
and slow debounce.)
Maximum table entries are 204*4.
Word count is only limited by ROM capacity.
3 output ports for Status or LED application:
OP_A Status:
Busy_high, DC_low, Stop_high,DC_high
LED: +Fast,+Slow, Dyn(7/10), Off
OP_B Status:
Busy_high, DC_low, Stop_high, DC_high
LED: -Fast, -Slow, Dyn(9/10), On
OP_C Status: Busy_high, DC_low,
Busy_low, DC_high
LED: +Fast, +Slow, On, Off
Each output can specify its initial state (High or
Low)
Outputs can be set as constant current
regardless of the supply voltage varied.
Two PWM playing ports. Drive speaker or
buzzer directly.
Body define: 3, 7, 14 seconds. (Total ROM size :
18k,42k,84k)
voice length(3s body:16384*5,7s
body:40960*5,14s body:83968*5)
Voice algorithm: 5-bits LOG_PCM
External resister for system frequency
Sixteen default sampling frequencies are
supported. The default frequencies can be
changed by applying an external resistor.
Support single key play on/off. (For OKY, TG0,
TG1)
Programmable only pull-low input. (For
OKY,TG3)
Programmable pull-high, pull-low or floating
input. (For TG0,TG1)
TG3_OPC pin can option as input or output by
mask option
General Description
The
AVXX32E -A are series of single-chip
synthesizing CMOS VLSI IC which synthesizes
voice by LOG_PCM algorithm. Table programming
and shared multiple I/O pins make the applications
flexible.
Powerful functions and pure speech architecture
make the
AVXX32E -A series are able to best fit
most speech applications and a best
cost/performance ratio as a result.
The programming of the
AVXX32E -A series is
first to define words. Each word contains voice data
(or mute length), output method, assemble the
words into sentences first, and then the programmer
can assign the sentences to the keys corresponding
to the user inputs.
The TG3_OPC pin of the
AVXX32E -A series is
multiplexed. This means it can option as input pin or
output pin.
Body Option Table
Body
ROM
Table
KEY
OUT
AV0332E 84K D0 3FF OKY, TG0 TG1 & TG3 OPA, OPB, OPC
AV0732E 42K D0 2FF OKY, TG0 TG1 & TG3 OPA, OPB, OPC
AV1432E 18K D0 1FF OKY, TG0, TG3 OPA, OPC
Preliminary
9-1 Ver. 0.1
AVXX32E -A SERIES
Pin Description
Pin Name
I/O
Description
VDD
Power
Positive power supply
TEST
In
Test enable pad, high-active, pull-low
OSC
In
With resister connected to VDD for system clock generating
OKY
In
Trigger input, active-high, with internal pull_low resistor. Can define
as sequential key or random key.
TG0, TG1
In
Trigger input, active-high with internal pull_low resistor.
In
Trigger input, active-high
TG3_OPC
Out
Status output
OPB
Out
Status output
OPA
Out
Status output
PWM1,
PWM2
Out
Voltage output to drive speaker or buzzer
VSS
Power
Negative power supply
Absolute Maximum Rating
Symbol
Rating
Unit
V
DD
~V
SS
-0.5 ~ +0.5
V
V
IN
(for input)
V
SS
-0.3 < V
IN
< V
DD
+0.3
V
V
OUT
(for all outputs)
V
SS
< V
OUT
< V
DD
V
T (operating)
-10 ~ +60
T (storage)
-55 ~ +125
DC Characteristics
Symbol
Parameter
Min Typ. Max Unit
Condition
V
DD
Operating Voltage
2.4
3.0
5.0
V
Isb
Standby
1
A V
DD
=3.0V, I/O open
Iop
Supply
Current
Operating
400
A V
DD
=3.0V, No loading
I
OL
OPA, OPB source Current
20
mA V
DD
=3.0V, V
IP
=2.7V
Ioh
OPA, OPB sink Current
20
mA V
DD
=3.0V, V
OP
=0.3V
d F/F
Frequency Variation by diff.
lot
10
%
V
DD
=4.5V
f
OSC
=384kHz
Function Diagram
1. OPA/B/C (1:0) are the output options.
Output
Option
0(00)
1(01)
2(10)
3(11)
Status
BH
DL
SH
DH
OPA
LED
+Fast
+Slow
Dy07
OFF
Status
BH
DL
SH
DH
OPB
LED
-Fast
-Slow
Dy09
ON
Status
BH
DL
BL
DH
OPC
LED
+Fast
+Slow
ON
OFF
Status output mode:
SH: Single pulse output, hi-level output
Preliminary
9-2 Ver. 0.1
BH: Busy output, hi-level output
AVXX32E -A SERIES
BL: Busy output, lo-level output
DH: Always Hi-level output
DL: Always Lo-level output
LED output mode:
+Fast, -Fast: High frequency alternate output
+Slow, -Slow: Low frequency alternate output
Dy09: Volume level (9/10)output control. If code > 9/10(FFh), then output "Lo". Otherwise output "Hi"
Dy07: Volume level (7/10)output control. If code > 7/10(FFh), then output "Lo". Otherwise output "Hi"
ON : Always Lo-level output
OFF: Always Hi-level output
Note: The Status and LED mode is optioned by mask option.
Edge/Level mode (If sentence = word1+word2)
Edge mode
Trigger length > Voice length
TG
Audio
word1 word2
debounce time
Trigger length < Voice length
TG
word1 word2
debounce time
Level mode
Trigger length > Voice length (if sentence=word1+word2)
TG
Audio
word1 word2
debounce time
word3 word4
Trigger length < Voice length (if sentence = word1+word2)
TG
Audio
word1 word2
debounce time
Preliminary
9-3 Ver. 0.1
AVXX32E -A SERIES
Hold/Unhold mode (If sentence = word1+word2)
Hold mode
TG
Audio
word1
debounce time
word2
Unhold mode
TG
Audio
word1 word2
debounce time
Retrigger/Irretrigger mode (If sentence = word1+word2)
Retrigger mode (Edge Unhold mode)
TG
Audio
word1
debounce time
word2
word3 word4
Irretrigger mode (Edge, Unhold mode)
TG
Audio
word1
debounce time
word2
Last key priority
If TG1, TG3 are retrigger mode
Looping function
If sentence is set to looping mode (sentence1_sentence2)
Preliminary
9-4 Ver. 0.1
PDF 
ZIP