comp-o-gide
TM
Industry Standard Snap-in Card Guides for
1
/
16
th
PCBs
52 Configurations to meet most standard requirements
Precision Molded for rigidity, strength and heat resistance from 94V-2 UL rated materials
Stainless Steel Conductive Inserts available for all sizes (see page 13)
Two channel depths and two channel widths available to accommodate
1
/
16
th
,
3
/
32
nd
PCBs
Common industry standards interchange with competitive devices
www.bivar.com
19
cage code (FSCM) 32559 copyright 2004 Bivar Inc.
COMP-O-GIDE, was introduced to provide second sources
for previously single source card guides. The series has
expanded to offer wider selection and application specific
function. Rigid, strong and economical, COMP-O-GIDEs
provide the installed reliability that your most demanding
products require. Retention is firm and there are no special
tools or fixtures required for installation.
Mounting Information:
Snap-in metal plates: 0.047"- 0.090" (1.2mm - 2.3mm) thick
Hole Size: 0.180" (4.6mm) diameter + 0.003" (0.08mm),
- 0.001" (0.03mm) 3/16th drill
Rear - 0.225" x 0.176" + 0.003" - 0.001"
Material Specifications:
UL Rated 94V-2, natural, 6/6 Nylon per ASTM D4066 PA111
Oxygen Index: +28%
UL File #E135532
Application Notes:
Slotting or elongating of the second mounting hole is
recommended to allow for length variations and to
provide for easier assembly.
Prolonged pre-assembly exposure to high humidity can
cause molded Nylon components to "grow" out of
tolerance. Storage in a cool dry place is recommended.
Open sealed vapor barrier bags at the time of production
to assure optimum shelf life.
A
B
Part No.
.031(.79)
.016 (.41)
SDC-250
2.5 (63.5)
1.5 (38.1)
SDC-300
3.0 (76.2)
2.0 (50.8)
SDC-350
3.5 (88.9)
2.5 (63.5)
SDC-400
4.0 (101.6)
3.0 (76.2)
SDC-450
4.5 (114.3)
3.5 (88.9)
SDC-500
5.0 (127.0)
4.0 (101.6)
SDC-550
5.5 (139.7)
4.5 (114.3)
SDC-600
6.0 (152.4)
5.0 (127.0)
SDC-650
6.5 (165.1)
5.5 (139.7)
SDC-700
7.0 (177.8)
6.0 (152.4)
SDC-750
7.5 (190.5)
6.5 (165.1)
SDC-800
8.0 (203.2)
7.0 (177.8)
SDC Series
For
1
/
16th
PCBs, 2-1/2" thru 8" Lengths
Recommended Mounting Holes
PDF 
ZIP