wash-away spacers
Wash-Away Component and General Purpose Spacers
Ideal for all industry-standard DIP, axial and radial mounted devices
Properly elevate and protect delicate leads during board handling and assembly
Spacers wash away in hot or warm running water
96 different sizes and elevations
www.bivar.com
96
cage code (FSCM) 32559 copyright 2004 Bivar Inc.
Part No.
I.D.
O.D.
Thickness
FIG.
TO-5
TO-5
.225 (5.7)
.375 (9.5)
030, 040, 050, 060, 070, 090, 100, 120, 130, 150
A
Spacer
TO-6
.250 (6.4)
.375 (9.5)
030, 040, 050, 060, 070, 090, 100, 120, 130
A
I.C. Spacer
TO-9
.300 (7.8)
.437 (11.1)
040, 050, 070, 090, 100, 120, 130, 150
A
.300 (7.6) L.S.
TO-13
.225 (5.7)
.310 (7.9)
040, 050, 060, 070, 090, 100, 120, 130
A
Epoxy Case
Part No.
I.D.
O.D.
Thickness
FIG.
TO-18
TO-12
.125 (3.2)
.310 (7.9)
080, 090, 100, 120, 130
B
.250 (6.4) L.S.
TO-16
.125 (3.2)
.205 (5.2)
030, 040, 050, 070, 090, 100, 120, 130
A
Epoxy Case
TO-17
.170 (4.3)
.250 (6.4)
030, 040, 050, 070, 090, 100, 120, 130
A
Thin Walls
TO-18
.125 (3.2)
.250 (6.4)
030, 040, 050, 060, 070, 090, 100, 120, 130, 150
A
Standard
TO-20
.125 (3.2)
.290 (7.4)
090, 100, 120, 130, 150
B
.200 (5.1) L.S.
TO-27
.125 (3.2)
.290 (7.4)
030, 040, 050, 070, 090, 100, 120, 130
A
Heavy Walls
Part No.
I.D.
O.D.
Thickness
Slot Depth
Width
FIG.
TO-21
.125 (3.2)
.250 (6.4)
090, 100, 120, 130, 150
.045 (1.1)
.060 (1.5)
C
TO-35
-
.440 (11.2)
120, 130, 140, 150
.065 (1.7)
.230 (5.8)
C
TO-36
-
.187 (4.7)
060, 070, 080, 090, 100, 130, 150
.040 (1.0)
.080 (2.0)
C
TO-37
-
.156 (4.0)
050, 070, 090, 100, 120
.025 (.64)
.050 (1.3)
C
TO-5
TO-18
AXIAL
D E F
A B
C
Standard Tolerances: .005
To Order:
Simply specify PART NUMBER and follow
by THICKNESS desired. EXAMPLE: TO-5-070
is the basic, TO-5 part, .070" thick
Note: For higher quantities or special
shapes consult factory.
+
_
Most DISS-O-PADs
may be ordered in an
effervescent version to reduce dissolving time.
Add the letter "E" as a suffix, e.g. TO-117-070E.
The extra cost is $3.50/K regardless of quantity.
PDF 
ZIP