ChipFind - документация

Электронный компонент: 4010-01

Скачать:  PDF   ZIP
Bourns
4010-01 Surge Protector Test Set is a hand-held, battery-operated tester designed to measure the clamping voltage and dc breakdown
voltage of most surge protective devices. The 4010-01 is suitable for testing gas tubes, carbon gaps, MOVs, Zener and avalanche diodes and
thyristor devices, both as components and as complete protectors.
The 4010-01 is a true slow-rise tester because it does not use a pulse transformer. It contains unique test circuitry and a precise 1mA detector.
As soon as 1mA is conducted through clamping type devices, such as MOVs and avalanche diodes, the control circuits removes the test
voltage from the output terminals and displays the clamping voltage on the meter. A low energy capacitive circuit will discharge through
crowbar type protectors, such as gas tubes and carbon blocks, and trigger the detector. The breakdown voltage will be displayed and the test
voltage removed.
4010-01 - Surge Protector Test Set
Internal switches for ramp speed and discharge circuit type are accessed by removing the back cover. They are to be set for the intended
application: 200 V/s for laboratory tests or QC type approvals;1000 V/s for high-speed testing or sorting. The IEEE discharge circuit permits
gas tubes to conduct in the arc mode, while the ITU circuit generally allows only glow currents to flow.
Pushing the test button applies a linear ramp to the device under test. Sensing circuitry automatically terminates the test when either the
dc breakdown or 1mA clamping voltage is reached. The test value is maintained on the LCD display until the test button is released.
Open Circuit Voltage Rate of Rise ............................................................................................................................................. 200V/s or 1000 V/s
Maximum Output Voltage .............................................................................................................................................................................. 1000 V
Useable Measuring Range ........................................................................................................................................................................ 10-1000 V
Test Current for Clamping Devices ....................................................................................................................................................... 1 mA
10 %
Test Current for Crowbar Devices ...................................................................................................................................................................... >1 A
Operating Temperature ........................................................................................................................................................................... 0 to +50
C
Storage Temperature .......................................................................................................................................................................... -10 to +60
C
Measurement Accuracy ................................................................................................................................................................................... 0.5 %
Power Source ........................................................................................................................................... 3 lithium batteries - NEMA type 5024LC
Battery Life
200 V/s .................................................................................................................................................................................. Up to 10,000 tests
1000 V/s .................................................................................................................................................................................. Up to 50,000 tests
Shipping Weight ............................................................................................................................................................................................... 2 lbs.
Warranty ........................................................................................................................................................................................................ 2 years
Notes:
For P-type thyristor protectors, breakdown voltage VBO occurs at the device zener voltage VZ. Therefore, the tester will measure actual VBO.
For N-type thyristor protectors, breakover voltage VBO is higher than the zener voltage VZ. For these devices, the tester will measure VZ.
Power
and
Start Circuit
Low Voltage
Linear Ramp
Generator
DC to
High Voltage
DC Converter
Output
to Device
Under Test
1 mA Current
Sense for High
Voltage Shutoff
Peak Voltage
Circuit and
Meter
Current Limiting
and Energy
Storage/Discharge
Network
Shut
Off
Features
Lightweight, hand-held design
Easy-to-read LCD display
Simple operation
High accuracy peak reading circuit
Wide 10-1000 V test range
Precise auto-sensing shutoff
Applications
Suitable for testing:
Gas tubes
Carbon gaps
MOVs
Zener and avalanche diodes
Thyristor devices
Finished product
Operation
Specifications
Description
Functional Block Diagram
REV. D, 09/03
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
4010-01 - Surge Protector Test Set
44.45
(1.75)
SURGE PROTECTOR TEST SET MODEL 4010-01
TEST
PEAK VOLTAGE
L1
L1-L2
L1-C
L2-C
C
L2
173.99
(6.85)
124.46
(4.90)
DIMENSIONS =
MILLIMETERS
(INCHES)
Additional Features
Selector switches for complete testing between all terminals and polarities
Linear voltage ramp, selectable for 200 V/s or 1000 V/s operation
Selectable IEEE or CCITT type discharge circuits
Wide range of adapters for standard protector types
Product Dimensions
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
How To Order
Part No.
Accessories Included
4010-01 .......... No Accessories
4010-01-A ...... Nylon Carrying Case
4010-01-B ...... Nylon Case, 48-inch Leads w/Alligator Clips
(Suitable for Testing A.C. Arresters on Site)
4010-01-C ...... Nylon Case, P/N 72288 and 72289 Gas Tube
Adapters
4010-01-D ...... Nylon Case, P/N 72291 5-Pin Module
Adapter
Part No.
Available Separately
30503-01 ........ Test Cable w/Alligator Clip - Red
30503-02 ........ Test Cable w/Alligator Clip - Black
4020-00-A ...... A.C. Power Adapter
72288 ............. Adapter for 2-pole Gas Tubes, Fits 6 and
8 mm High Gas Tubes and Most Carbon
Block Protectors
72289 ............. Adapter for 3-pole Gas Tubes with Leads on
4.4, 4.7 and 6.4 mm Centers
72291 ............. Adapter for Standard 300 Series 5-pin
Protector Module