2005 California Micro Devices Corp. All rights reserved.
10/04/05
490 N. McCarthy Blvd., Milpitas, CA 95035-5112
Tel: 408.263.3214
Fax: 408.263.7846
www.cmd.com
1
CM1401-03
4-Channel ESD/EMI Filter Array plus
4-Channel ESD Array for USB
Features
Functionally and pin compatible with CSPEMI307A
device
Optiguard
TM
coated for improved reliability at
assembly
Four channels of combined EMI/RFI filtering +
ESD protection
Four additional channels of ESD-only protection
40dB absolute attenuation (typical) at 1 GHz
35dB attenuation (typical) at 1 GHz relative to pass
band
15kV ESD protection on all channels
(IEC 61000-4-2 Level 4, contact discharge)
30kV ESD protection on all channels (HBM)
15-bump, 2.960mm X 1.330mm footprint
Chip Scale Package (CSP)
Chip Scale Package features extremely low
lead inductance for optimum filter and ESD
performance
Lead-free version available
Applications
EMI filtering and ESD protection for both data and
I/O ports
Outer 4 channels provide ESD protection for
USB lines and other I/O port applications
Wireless Handsets
Handheld PCs / PDAs
MP3 Players
Notebooks
Desktop PCs
Product Description
The CM1401-03 is a multichannel array with four low-
pass filter + ESD channels and four ESD-only chan-
nels. They reduce EMI/RFI emissions on a data port
and protect against ESD on a USB port. Each EMI/RFI
channel integrates a high quality pi-style filter (C-R-C)
which provides greater than 30dB attenuation in the
800-2700 MHz range relative to the pass band attenu-
ation. These pi-style filters are bidirectional, controlling
EMI both to and from a data port connector.
The CM1401-03 provides a high-level of ESD protec-
tion on all eight channels for sensitive electronic com-
ponents that may be subjected to electrostatic
discharge (ESD). The input pins safely dissipate ESD
strikes of
15kV, exceeding the maximum requirement
of the IEC 61000-4-2 international standard. Using the
MIL-STD-883 (Method 3015) specification for Human
Body Model (HBM) ESD, the device provides protec-
tion for contact discharges to greater than
30kV.
The CM1401-03 is particularly well suited for portable
electronics (e.g., cellular telephones, PDAs, notebook
computers) because of its small package footprint and
low weight.
The CM1401-03 incorporates Optiguard
TM
coating
which results in improved reliability at assembly and is
available in a space-saving, low-profile chip scale
package with optional lead-free finishing.
Electrical Schematic
100
30pF
30pF
FILTER+ESDn*
GND
FILTER+ESDn*
1 of 4 EMI/RFI + ESD Channels.
(Pins B1-B3)
30pF
ESDn*
1 of 4 ESD-only Channels
* See Package/Pinout Diagram for expanded pin information
2005 California Micro Devices Corp. All rights reserved.
2
490 N. McCarthy Blvd., Milpitas, CA 95035-5112
Tel: 408.263.3214
Fax: 408.263.7846
www.cmd.com
10/04/05
CM1401-03
Ordering Information
Note 1: Parts are shipped in Tape & Reel form unless otherwise specified.
Note 2: Lead-free devices are specified by using a "+" character for the top side orientation mark.
PIN DESCRIPTIONS
PIN(s)
NAME
DESCRIPTION
A1
ESD_1
ESD Channel 1
A2
FILTER+ESD_1
Filter + ESD Channel 1
A3
FILTER+ESD_2
Filter + ESD Channel 2
A4
FILTER+ESD_3
Filter + ESD Channel 3
A5
FILTER+ESD_4
Filter + ESD Channel 4
A6
ESD_2
ESD Channel 2
B1-B3
GND
Device Ground
C1
ESD_3
ESD Channel 3
C2
FILTER+ESD_1
Filter + ESD Channel 1
C3
FILTER+ESD_2
Filter + ESD Channel 2
C4
FILTER+ESD_3
Filter + ESD Channel 3
C5
FILTER+ESD_4
Filter + ESD Channel 4
C6
ESD_4
ESD Channel 4
FILTER+ESD_4
ESD_2
GND
FILTER+ESD_4
ESD_4
A6
A5
Orientation
Marking
B3
C6
C5
FILTER+ESD_2
FILTER+ESD_3
GND
FILTER+ESD_2
FILTER+ESD_3
A4
A3
B2
C4
C3
ESD_1
FILTER+ESD_1
GND
ESD_3
FILTER+ESD_1
A2
A1
B1
C2
C1
A1
N013
4
3
2
6
5
1
C
B
A
Orientation
Marking
(see note 2)
PACKAGE / PINOUT DIAGRAMS
BOTTOM VIEW
CSP Package
(Bumps Up View)
TOP VIEW
(Bumps Down View)
CM1401-03
Notes:
1) These drawings are not to scale.
2) Lead-free devices are specified by using a "+" character for the top side orientation mark.
PART NUMBERING INFORMATION
Pins
Package
Standard Finish
Lead-free Finish
2
Ordering Part
Number
1
Part Marking
Ordering Part
Number
1
Part Marking
15
CSP
CM1401-03CS
N013
CM1401-03CP
N013
2005 California Micro Devices Corp. All rights reserved.
10/04/05
490 N. McCarthy Blvd., Milpitas, CA 95035-5112
Tel: 408.263.3214
Fax: 408.263.7846
www.cmd.com
3
CM1401-03
Specifications
Note 1: T
A
=25
C unless otherwise specified.
Note 2: ESD applied to input and output pins with respect to GND, one at a time.
Note 3: Clamping voltage is measured at the opposite side of the EMI filter to the ESD pin. For example, if ESD is applied to Pin A2,
then clamping voltage is measured at Pin C2.
Note 4: These parameters are guaranteed by design and characterization.
ABSOLUTE MAXIMUM RATINGS
PARAMETER
RATING
UNITS
Storage Temperature Range
-65 to +150
C
DC Power per Resistor
100
mW
DC Package Power Rating
600
mW
STANDARD OPERATING CONDITIONS
PARAMETER
RATING
UNITS
Operating Temperature Range
-40 to +85
C
ELECTRICAL OPERATING CHARACTERISTICS
(SEE NOTE1)
SYMBOL
PARAMETER
CONDITIONS
MIN
TYP
MAX
UNITS
R
Resistance
80
100
120
C
Capacitance
At 2.5V DC
24
30
36
pF
TCR
Temperature Coefficient of Resistance
1200
ppm/C
TCC
Temperature Coefficient of Capacitance
At 2.5V DC
-300
ppm/C
V
DIODE
Diode Voltage (reverse bias)
I
DIODE
=10
A
6.0
V
I
LEAK
Diode Leakage Current (reverse bias)
V
DIODE
=3.3V
100
nA
V
SIG
Signal Voltage
Positive Clamp
Negative Clamp
I
LOAD
= 10mA
5.6
-1.5
6.8
-0.8
9.0
-0.4
V
V
V
ESD
In-system ESD Withstand Voltage
a) Human Body Model, MIL-STD-883,
Method 3015
b) Contact Discharge per IEC 61000-4-2
Level 4
Notes 2 and 4
30
15
kV
kV
V
CL
Clamping Voltage during ESD Discharge
MIL-STD-883 (Method 3015), 8kV
Positive Transients
Negative Transients
Notes 2,3 and 4
+10
-5
V
V
f
C
Cut-off Frequency
Z
SOURCE
=50
, Z
LOAD
=50
R=100
, C=30pF
58
MHz
2005 California Micro Devices Corp. All rights reserved.
4
490 N. McCarthy Blvd., Milpitas, CA 95035-5112
Tel: 408.263.3214
Fax: 408.263.7846
www.cmd.com
10/04/05
CM1401-03
Performance Information
Typical Filter Performance (T
A
=25C, DC Bias=0V, 50 Ohm Environment)
Figure 1. Insertion Loss vs. Frequency (A2-C2 to GND B2)
Figure 2. Insertion Loss vs. Frequency (A3-C3 to GND B2)
2005 California Micro Devices Corp. All rights reserved.
10/04/05
490 N. McCarthy Blvd., Milpitas, CA 95035-5112
Tel: 408.263.3214
Fax: 408.263.7846
www.cmd.com
5
CM1401-03
Performance Information
Typical Filter Performance (T
A
=25C, DC Bias=0V, 50 Ohm Environment)
Figure 3. Insertion Loss vs. Frequency (A4-C4 to GND B2)
Figure 4. Insertion Loss vs. Frequency (A5-C5 to GND B2)
PDF 
ZIP