Specifications are subject to change without notice (24.01.05)
1
General Accessories
Connectors
Type CONMP5...
Straight or 90 connectors
M8 version - push on
3 wire
DC version
LED's in transparent housing
IP 67
Easy stripping-off the outer jacket
Good resistance against chemicals
Product Description
PVC version: Connection cable
for use in normal environments.
Inexpensive cable ideally
suited for a static and less
demanding use. Suitable for
medium mechanical demands
like in packaging machines,
assembly- and production
lines. the connectors have a
good resistance against
chemicals. The cables are not
resistant against oil and lubri-
cants and have a limited
resistance towards abrasion.
The connectors are available
in 3 wire versions as well as
straight or angled versions.
Ordering Key
CONM = Muur
P5 = M8 Push-on DC
3 = 3 Wire (BN, BU, BK)
N= Not shielded
F= Female
A = Angled
S = Straight
2 = 2 meters
5 = 5 meters
10 = 10 meters
Blank = PVC cable
Type Selection
Plug type
Cable
Ordering number
length
3-Wire Angled
2 m
CONMP53NF-A2
3-Wire Straight
2 m
CONMP53NF-S2
CONMP53NF-A2
Specifications
Rated operating voltage (U
B
)
3 or 4 wire version
250 V ac/dc
Output current
4 A
Contact resistance
6 m
Contact material
CuZn
Coating
0.2Ni + 0.5 Au
Pin diameter
1.02 mm
Contact bearer material
PUR green
Pin and key code position
IEC 61076-2-101
Temperature
-25 to +85C
Degree of protection
IP 65
Insulation test
3 wire version
0.8 kV
Moulded body material
PUR black
Connection cable
Black, PVC
Wire cross section
3 wire version
0,25 mm
2
(32x0.1mm)
Weight
2 m version
approx 63 g
Polution degree
3
Overvoltage category
lll
Insulation group
ll
CONMP5x-Ax
CONMP5x-Sx
PDF 
ZIP