Du line
Fieldbus
Installationbus
Specifications are subject to change without notice (30.04.03)
1
Dupline
is a registered trademark. A product of the CARLO GAVAZZI Group
Product Description
Ordering Key
Type: Dupline
Type
Transmitter for Analog Current Signals
Type G 3210 1161
AnaLink transmitter with 4 to 20 mA input
8-bit resolution
Optical isolation
Uses only 1 channel
Channel coding by GAP 1605
Supplied by Dupline
and current signal
H2-housing
For mounting on DIN-rail in accordance with EN 50022
Dupline
Analink transmitter
with 4 to 20 mA input. Con-
verts the 4 to 20 mA input sig-
nal to an 8-bit binary value,
which is transmitted to the
controller G 3890 0030 230. In
this unit the analog values can
be scaled, logged and printed
out and/or read from a PC.
The 4 to 20 mA signal must
be able to supply a voltage
drop of 6 V, since the analog
part of the transmitter is sup-
plied by the input signal.
Supply
Ordering no.
1 channel
4 to 20 mA
By Dupline
and current signal G 3210 1161
Type Selection
Input Specifications
Signal input
4 to 20 mA
Voltage drop
6 V
Resolution
8-bit (62.5 A/LSB)
Max. current
100 mA
Inaccuracy
(entire temperature range)
1%
Cable length
25 m
Dielectric voltage
2 kV
Response time
256 pulse trains
(
18 s @ 64 channels)
Current consumption
from Dupline
< 600 A
Power dissipation
< 10 mW
Supply Specifications
General Specifications
Channel programming
By GAP 1605
Channel assignment
1 channel,
freely programmable
Environment
Degree of protection
IP 20
Pollution degree
3 (IEC 60664)
Operating temperature
0 to +50C (+32 to +122F)
Storage temperature
-50 to +85C (-58 to +185F)
Humidity (non-condensing)
20 to 80% RH
Mechanical resistance
Shock
15 G (11 ms)
Vibration
2 G (6 to 55 Hz)
Dimensions
Material
(see "Technical Information")
H2-housing
Weight
90 g
G 3210 1161
Du line
Fieldbus
Installationbus
2
Specifications are subject to change without notice (28.09.99)
Dupline
is a registered trademark. A product of the CARLO GAVAZZI Group
G 3210 1161
Distance Versus No. of Sensors
Example:
Max. distance for 100 sensors
G 3210 1161: 100 x 0.6 mA = 60 mA
loop resistance ~ 35
. If 1.5 mm
2
cable @ 12
/km is used, the distance
is:
Dupline
load (mA)
from AnaLink
sensors
DC loop
resistance (
)
2 x 12
/km
35
= 1.45 km max.
Accessories
Wiring Diagram
DIN-rail
FMD 411
For further information refer to "Accessories".
G 3210 1161
DUPLINE
1
2
3
4
21
22
23
24
+
4-20mA
PDF 
ZIP