Du line
Fieldbus
Installationbus
Specifications are subject to change without notice (30.04.03)
1
Dupline
is a registered trademark. A product of the CARLO GAVAZZI Group
Product De scrip tion
Ordering Key
Type: Dupline
H4-housing
Transmitter
No. of channels
Input type
Transmitter for Digital Signals
Type G 3410 5501
8-channel monostabil transmitter
H4-housing
For mounting on DIN-rail (EN 50022)
Channel coding by GAP 1605
Dupline
powered
Supply
Ordering no.
8 channels Contact
Powered by Dupline
G 3410 5501
Dupline
-pow ered trans mit ter.
Mono stable func tion. Detects
the states of 8 volt-free con-
tacts. Espe
cial ly suit
able for
appli ca tions in plac
es
where
no pow er sup ply is avail able.
Input Spec i fi ca tions
Inputs
8 contacts
Open loop voltage
5.3 to 7.6 VDC
Short-circuit current
17 A
Operating time for signal "1"
1 pulse train + 10 ms
Operating time for signal "0"
1 pulse train + 110 ms
Contact resistance
1 k
Cable length
3 m
Dielectric Voltage
inputs - Dupline
None
Type Selection
Supply Spec i fi ca tions
Power supply
Supply by Dupline
Dupline
power consumption
LED Not activated
Min. 400 A
Max. 550 A
LED Activated
Min. 1.7 mA
Max. 2.3 mA
G 3410 5501
General Spec i fi ca tions
Power ON delay
typ. 2 s
Indication for
Dupline
carrier
LED, yellow
Note:
Test that yellow LED can
emit light, when shortcut
pin 23 and 24, and Dupline
is connected to the module.
Environment
Degree of protection
IP 20
Pollution degree
3 (IEC 60664)
Operating temperature
-20 to +50C (-4 to +122F)
Storage temperature
-50 to +85C (-58 to +185F)
Humidity (non-condensing)
20 to 80%
Mechanical re sist ance
Shock
15 G (11 ms)
Vibration
2 G (6 to 55 Hz)
Dimensions
Material
(see Technical Information)
H4-Housing
Weight
250 g
Accessories
For further information, see "Accessories".
Dimensions (mm)
H4-housing
Du line
Fieldbus
Installationbus
2
Specifications are subject to change without notice (17.10.2006)
Dupline
is a registered trademark. A product of the CARLO GAVAZZI Group
G 3410 5501
Mode of Operation
8-channel monostable trans-
mitter with 8 contact inputs.
Each input may be coded in-
dividually by means of the
code programmer GAP 1605.
For details, please refer to the
respective data sheet.
When pin 25 is ac ti vat ed, the
G3410 5501 trans mits on the
channel coded for input 1.
When pin 26 is activated,
transmission takes place on
the channel coded for input 2.
Transmission stops in spite of
activated inputs if the Dupline
carrier is interrupted.
Input connections
Input 1:
terminals 24 & 25
Input 2:
terminals 24 & 26
Input 3:
terminals 24 & 27
Input 4:
terminals 24 & 28
Input 5:
terminals 4 & 5
Input 6:
terminals 4 & 6
Input 7:
terminals 4 & 7
Input 8: terminals 4 & 8
LED test terminals 23 & 24
Operation Diagram
Input 1 (term. 25)
Transmission on chan. for input 1
Input 8 (term. 8)
Transmission on channel for input 8
Power supply
8 channels G 3420 5501 ...
Contact input
Wiring Diagrams
D+
D -
D: signal wire
Test that yellow LED can
emit light, when shortcut pin
23 and 24, and Dupline
is
connected to the module.
-
Ter mi nals 2,4 and 24
are in-ter nal ly con nect ed.
-
Ter mi nals 2,4 and 24
are com mon ( minus).
PDF 
ZIP