Du line
Fieldbus
Installationbus
Specifications are subject to change without notice (30.04.03)
1
Dupline
is a registered trademark. A product of the CARLO GAVAZZI Group
Product Description
Ordering Key
Type: Dupline
H4-housing
Transmitter
No. of channels
Input type
Power supply
Transmitter for Digital Signals
Type G 3420 5502
8-channel transmitter
8 opto-isolated voltage inputs:
6 to 265 VAC/DC
H4-housing
For mounting on DIN-rail (EN 50022)
LED-indications for supply, input activated and
Dupline
carrier
AC or DC power supply
Channel coding by GAP 1605
Supply
Ordering no.
8 channels
6 to 265 VAC/DC
24 VAC
G 3420 5502 024
115 VAC
G 3420 5502 115
230 VAC
G 3420 5502 230
10 to 30 VDC
G 3420 5502 800
Dupline
transmitter for exter-
nal supply. Detects the sig-
nals from 8 devices with volt-
age outputs of up to 265
VAC/DC, e.g. the presence of
mains supply to machinery.
Type Selection
Supply Specifications
Power supply AC types
Overvoltage cat. III (IEC 60664)
Rated operational voltage
through term. 21 & 22 230
230 VAC, 15%
115
115 VAC, 15%
024
24 VAC, 15%
Frequency
45 to 65 Hz
Voltage interruption
40 ms
Rated operational power Typ. 4.5 VA
Power dissipation
8 W
Rated impulse withstand
voltage 230
4
kV
115
2.5 kV
024
800 V
Dielectric voltage
Supply - Dupline
4 kVAC (rms)
Supply - Inputs
4 kVAC (rms)
Power supply DC type
Overvoltage cat. III (IEC 60664)
Rated operational voltage
through term. 21 & 22 800
10 to 30 VDC (ripple included)
Ripple
3 V
Reverse-polarity protection
Yes
Power consumption
< 1 W
Power dissipation
5.5 W
Inrush current
1 A
Rated impulse withstand
voltage
800 V
Dielectric voltage
Supply - Dupline
200 VAC (rms)
Supply - Inputs
4 kVAC (rms)
Input Specifications
Inputs
8 voltage-type
Input voltage range V
BB
6 to 265 VAC/DC
Frequency range on AC 45 to 400 Hz
Input voltage for signal "0"
1 VAC/DC
Input voltage for signal "1"
6 VAC/DC
Input current for signal "1"
Typ. 10 mA (V
BB
10-18 VDC)
lower at other input voltages
Input current limiter
Yes
Inrush current
450 mA
(at V
BB
= 265 VDC)
Operating time for signal "1"
1 pulse train + 3 ms
Operating time for signal "0"
1 pulse train + 50 ms
Cable length
25 m
Dielectric voltage
Inputs - Dupline
4 kVAC (rms)
G 3420 5502 024
Du line
Fieldbus
Installationbus
2
Specifications are subject to change without notice (28.09.99)
Dupline
is a registered trademark. A product of the CARLO GAVAZZI Group
Power ON delay
Typ. 2 s
Power OFF delay
1 s
Output OFF delay
upon loss of Dupline
carrier
20 ms
Indication for
Supply ON
LED, green
Input activated
LED, red
Dupline
carrier
LED, yellow
Environment
Degree of protection
IP 20
Pollution degree
3 (IEC 60664)
Operating temperature
-20 to +50C (-4 to +122F)
Storage temperature
-50 to +85C (-58 to +185F)
Humidity (non-condensing)
20 to 80%
Mechanical resistance
Shock
15 G (11 ms)
Vibration
2 G (6 to 55 Hz)
Dimensions
Material
(see "Technical Information")
H4-housing
Weight
250 g
G 3420 5502
General Specifications
Mode of Operation
8-channel transmitter with 8
voltage inputs (6 to 265
VAC/DC).
Each input may be coded in-
dividually by means of the
code programmer GAP
1605. For details, please
refer to the respective data
sheet.
When a voltage (6 to 265
VAC/DC) is applied to termi-
nal 25 (input 1), the transmit-
ter transmits on the channel
coded for input 1.
Whenever the voltage of the
input is < 1 V, the transmitter
stops transmitting on the re-
spective channel.
Notes:
- Terminals 4 and 24 are in-
ternally connected.
- Terminals 4 and 24 are
common (minus).
Input connections
Input 1:
terminals 24 & 25
Input 2:
terminals 24 & 26
Input 3:
terminals 24 & 27
Input 4:
terminals 24 & 28
Input 5:
terminals 4 & 5
Input 6:
terminals 4 & 6
Input 7:
terminals 4 & 7
Input 8: terminals 4 & 8
Wiring Diagram
S: signal wire
~
(+)
~
(-)
Power
supply
1 2 3 4
V
BB
+ ~
- ~
V
BB
- ~
+ ~
Operation Diagram
Input 1 (term. 25)
Transmission on chan. for input 1
Input 8 (term. 8)
Transmission on channel for input 8
Power supply
Accessories
DIN-rail
FMD 411
For further information, see "Accessories".
5 6 7 8
Dimensions (mm)
H4-housing
PDF 
ZIP