ChipFind - документация

Электронный компонент: G34305511024

Скачать:  PDF   ZIP
Specifications are subject to change without notice (06.09.99)
1
8-channel receiver
Optoisolated NPN (sink) or PNP (source)
transistor outputs
Load: 8 x 0.7 A/60 VDC
Reverse-polarity protection
H4-housing
For mounting on DIN-rail (EN 50022)
LED-indications for supply and Dupline carrier
AC or DC power supply
Channel coding by GAP 1605
Product Description
Ordering Key
Type: Dupline
H4-housing
Receiver
No. of channels
Output type
Power supply
Dupline
Field- and Installationbus
Receiver for Digital Signals
Types G 3430 5511, G 3430 5521
Dupline receiver.
Open collector NPN or PNP
Type Selection
Supply
Ordering no.
Ordering no.
8 channels
8 channels
0.7 A/60 VDC
0.7 A/60 VDC
NPN transistor
PNP transistor
24 VAC
G 3430 5511 024
G 3430 5521 024
115 VAC
G 3430 5511 115
G 3430 5521 115
230 VAC
G 3430 5511 230
G 3430 5521 230
10 to 30 VDC
G 3430 5511 800
G 3430 5521 800
transistor outputs for control
of loads up to 60 VDC/0.7 A.
Output Specifications
G 3430 5511 ...
G 3430 5521 ...
(8 channels)
(8 channels)
Outputs
8 NPN transistors
8 PNP transistors
Isolated in groups of
1 x 8
1 x 8
Output voltage range V
BB
6 to 60 VDC
6 to 60 VDC
Reverse-polarity protection
Yes
Yes
Current per output (25C)
0.7 A
0.7 A
Total load capability (25C)
51%
51%
Short-circuit protection
None
None
Built-in protective diodes
None
None
Off-state leakage current
100 A
100 A
Output voltage drop
1.5 VDC
1.5 VDC
Dielectric voltage
Outputs - Dupline
4 kVAC (rms)
4 kVAC (rms)
G 3430 5521 024
2
Specifications are subject to change without notice (06.09.99)
Power ON delay
Typ. 2 s
Power OFF delay
1 s
Output OFF delay
upon loss of Dupline carrier
20 ms
Indication for
Supply ON
LED, green
Dupline carrier
LED, yellow
Environment
Degree of protection
IP 20
Pollution degree
3 (IEC 60664)
Operating temperature
-20 to +50C (-4 to +122F)
Storage temperature
-50 to +85C (-58 to +185F)
Humidity (non-condensing)
20 to 80%
Mechanical resistance
Shock
15 G (11 ms)
Vibration
2 G (6 to 55 Hz)
Dimensions
Material
(see Technical information)
4H-housing
Weight
AC types
250 g
DC types
200 g
G 3430 5511, G 3430 5521
Supply Specifications
Power supply AC types
Overvoltage cat. III (IEC 60664)
Rated operational voltage
terminals 21 & 22
230
230 VAC 15% (IEC 60038)
115
115 VAC 15% (IEC 60038)
024
24 VAC 15%
Frequency
45 to 65 Hz
Voltage interruption
40 ms
Rated operational power
Typ. 3.5 VA
Rated impulse withstand
voltage
230 4 kV
115
2.5 kV
024 800 V
Dielectric voltage
Supply - Dupline
4 kVAC (rms)
Supply - Outputs
4 kVAC (rms)
General Specifications
Mode of Operation
G 3430 55.1 ...
8-channel receivers with 8
open collector NPN or PNP
outputs
Each output may be coded
individually by means of the
code programmer GAP 1605.
See separate data sheet.
The outputs are normally off.
When a transmitter coded to
the selected channel is acti-
vated, the output turns on
and remains on until the
respective channel becomes
deactivated (interruption or
short-circuiting of Dupline
carrier).
Power supply DC types
Overvoltage cat. III (IEC 60664)
Rated operational voltage
terminals 21 & 22
800
10 to 30 VDC
(ripple included)
Ripple
3 V
Reverse-polarity protection
Yes
Rated operational current
150 mA
Inrush current
1 A
Rated impulse withstand
voltage
800 V
Dielectric voltage
Supply - Dupline
200 VAC (rms)
Supply - Outputs
4 kVAC (rms)
Operation Diagram
Dupline carrier
Transmission on channel for output 1
Output 1 (terminal 25)
Transm. on chan. for output 2
Power supply
Output 2 (terminal 26)
Specifications are subject to change without notice (06.09.99)
3
(+) (-)
G 3430 5511, G 3430 5521
Derating Curve
The curve shows the current
allowed per output at differ-
ent temperatures. The dotted
line indicates the total load
capability per receiver at dif-
ferent temperatures.
Wiring Diagrams
G 3430 5521 ... 8 channels
Open collector PNP transistor ouput
G 3430 5511 ... 8 channels
Open collector NPN transistor output
V
BB
V
BB
(+) (-)
V
BB
V
BB
Ch. 1, 2, 3, 4
Ch. 1, 2, 3, 4
Ch. 5, 6, 7, 8
Ch. 5, 6, 7, 8
Power
supply
Power
supply
S: Signal wire
S: Signal wire
Accessories
DIN-rail
FMD 411
For further information, see "Accessories".