Du line
Fieldbus
Installationbus
Specifications are subject to change without notice (28.09.99)
1
Dupline
is a registered trademark. A product of the CARLO GAVAZZI Group
Product Description
Ordering Key
Type: Dupline
H8-housing
Receiver
No. of channels
Output type
Power supply
Receiver for Digital Signals
Type G 3830 5543
8-channel receiver
Galvanically separated SPST relay outputs
Load: 8 x 5 A/250 VAC
H8-housing
For mounting on DIN-rail (EN 50022)
LED-indications for supply, Dupline
carrier
and outputs
AC power supply
Channel coding by GAP 1605
Supply
Ordering no.
8 channels
5 A/250 VAC
24 VAC
G 3830 5543 024
115 VAC
G 3830 5543 115
230 VAC
G 3830 5543 230
Dupline
receiver.
SPST relay outputs for con-
Type Selection
trol of 8 loads of up to 250
VAC/5 A.
Supply Specifications
Power supply
Overvoltage cat. III (IEC 60664)
Rated operational voltage
through term. 21 & 22 230
230 VAC, 15% (IEC 60038)
115
115 VAC, 15% (IEC 60038)
024
24 VAC, 15%
Frequency
45 to 65 Hz
Voltage interruption
40 ms
Rated operational power Typ. 7.0 VA
Rated impulse withstand
voltage
230 4 kV
115 2.5 kV
024 800 V
Dielectric voltage
Supply - Dupline
4 kVAC (rms)
Supply - Outputs
4 kVAC (rms)
Output Specifications
Outputs
8, SPST relays
Isolated in groups of 8 x 1
Contact ratings (AgCdO)
(micro gap)
Resistive loads
AC 1
5 A/250 VAC (1250 VA)
DC 1
0.25 A/250 VDC (62 W)
or
5 A/25 VDC (125 W)
Inductive loads
AC 15
2.5 A/230 VAC
DC 13
5 A/24 VDC
Mechanical lifetime
30 x 10
6
operations
Electrical lifetime
(at max. load)
AC 1
2.0 x 10
5
operations
Operating frequency
7200 operations/h
Dielectric voltage
Outputs - Dupline
4 kVAC (rms)
Response time
1 pulse train
G 3830 5543 024
Du line
Fieldbus
Installationbus
2
Specifications are subject to change without notice (28.09.99)
Dupline
is a registered trademark. A product of the CARLO GAVAZZI Group
Output OFF delay
upon loss of Dupline
carrier
20 ms
Power ON delay
Typ. 2 s
Indication for
Supply ON
LED, green
Dupline
carrier
LED, yellow
Output ON
LED, red (one per output)
Environment
Degree of protection
IP 20
Pollution degree
3 (IEC 60664)
Operating temperature
-20 to +50C (-4 to +122F)
Storage temperature
-50 to +85C (-58 to +185F)
Humidity (non-condensing)
20 to 80%
Mechanical resistance
Shock
15 G (11 ms)
Vibration
2 G (6 to 55 Hz)
Dimensions
Material
(see Technical information)
H8-housing
Weight
800 g
G 3830 5543
General Specifications
Mode of Operation
8-channel receiver with 8
normally open contact out-
puts. Each output may be
coded individually by means
of the code programmer
GAP 1605. For details, plea-
se refer to the respective
data sheet.
The outputs are normally off.
When a transmitter coded to
the selected channel is ac-
tivated, the output turns on
and remains on until the re-
spective channel becomes
deactivated.
Operation Diagram
Dupline
carrier
Transmission on channel for output 1
Output 1 (term. 29 & 30)
Transmission on chan. for output 2
Power supply
Output 2 (term. 31 & 32)
Wiring Diagram
Accessories
DIN-rail
FMD 411
For further information see "Accessories".
Output connections
Output 1: terminals 29 & 30
Output 2: terminals 31 & 32
Output 3: terminals 33 & 34
Output 4: terminals 35 & 36
Output 5: terminals 9 & 10
Output 6: terminals 11 & 12
Output 7: terminals 13 & 14
Output 8: terminals 15 & 16
The default setting of the
module is such that upon
loss of Dupline
carrier all
the outputs go off.
out
1
Power
supply
out
2
out
3
out
4
out
5
out
6
out
7
out
8
S: signal wire
PDF 
ZIP