Du line
Fieldbus
Installationbus
Specifications are subject to change without notice (11.05.04)
1
Dupline
is a registered trademark. A product of the CARLO GAVAZZI Group
Product Description
Ordering Key
Type: Dupline
Housing
Transmitter
No. of channels
Input type
Remote Voltage Input
Type G 8810 1102
1-channel monostable transmitter
1 opto-isolated voltage input 90-265 VAC
Powered via Dupline
Compact housing
Address coding by GAP 1605
G8810 1102 is a 1 channel
Dupline
supplied transmitter
with 1 voltage input. The
module is especially designed
for the use in building auto-
mation applications where it
allows a flexible installation
Type Selection
Ordering no.
1 channel, voltage input 90-265 VAC
G 8810 1102
concept featuring a separate
power and signal (control)
bus. The compact size of the
module makes it possible to
fit it in a junction box or direct-
ly behind a power outlet.
G 8810 1102
Input Specifications
Input
Input
90-265 VAC
Input connection
Red and blue wire
2 x 1.5 mm
2
, 150 mm,
single core, isolation 250 V
ON
90 VAC
OFF
60 VAC
Dielectric voltage
Input-Dupline
4 kVAC (rms)
Supplied by Dupline
Consumption, unactivated
Typ. 1 mA
Consumption, activated
Typ. 1.4 mA
Dupline connection
White and black wire
Power-on delay
Typ. 2 s
Power dissipation
@ max. input voltage
0.5 W
General Specifications
Channel coding
By GAP 1605 and special
cable: GAP-THP-CAB
No. of channels
1
Environment
Degree of protection
IP 20
Pollution degree
3 (IEC 60664)
Operating temperature
-20 - +50 C (-4 - +122F)
Storage temperature
-50 - +70C (-58 - +158F)
Humidity (non condensing)
20 - 80%
Weight
50 g
Supply Specifications
Mode of Operation
The address may be coded
by means of the code pro-
grammer GAP 1605, with
GAP-THP-CAB cable.
When the voltage on the
input wires exceeds 90 VAC,
the transmitter is activated
and when the voltage drops
below 60 VAC the transmis-
sion stops.
Du line
Fieldbus
Installationbus
2
Specifications are subject to change without notice (11.05.04)
Dupline
is a registered trademark. A product of the CARLO GAVAZZI Group
D+
Input
Red
Blue
White
Black
D+ D-
D-
Wiring Diagram
G 8810 1102
Bus:
White =
Dupline
signal, D+
Black =
Dupline
negative, D-
Input:
Red =
Voltage
input
Blue = Voltage
input
Bus wires:
2 x 0,75 mm
2
,
250 V isolation, single core, 150 mm
Input wires:
2 x 1,5 mm
2
,
250 V isolation, single core, 150 mm
39
26
17
Dimensions
Programming cable
to GAP 1605
GAP-TPH-CAB
Accessories
PDF 
ZIP