Du line
Fieldbus
Installationbus
Specifications are subject to change without notice (18.09.03)
1
Dupline
is a registered trademark. A product of the CARLO GAVAZZI Group
Product Description
Ordering Key
Type: Dupline
Type
Transmitter with Magnetic
Proximity Switch Function
Type G 8910 1101
ABS housing cylindrical
11 or M14 housing
Sensing distance: 8 mm
Supplied by Dupline
1.5 m cable
Channel coding by GAP 1605 with ADAPT 1605
Non-powered Dupline
mag-
net-operated proximity switch
with built-in transmitter. Avail-
able in 11 plastic housing or
with M 14 metal thread. Moni-
toring of open doors and win-
dows in building installations.
Housing diameter
Nominal sensing distance
Ordering no.
S
n
1 channel
magnet-operated proximity switch
11 mm
8 mm
G 8910 1101
M14 mm
8 mm
G 8910 1101 G
Input Specifications
Input
Magnetic proximity switch
Sensing distance measured
from front end:
Nominal sensing distance S
n
8 mm
Operating sensing distance S
a
5 mm
S
a
15 mm
Release distance
30 mm
Response time
1 pulse train
Type Selection
Power supply
Supplied by Dupline
Reverse-polarity protection
Yes
Rated operational current
300 A
Supply Specifications
General Specifications
Environment
Degree of protection
IP 67
Pollution degree
3 (IEC 60664)
Operating temperature
-20 to +50C (-4 to +122F)
Storage temperature
-20 to +70C (-4 to +158F)
Mechanical resistance
Shock
15 G (11 ms)
Vibration
2 G (6 to 55 Hz)
Tightening torque (G8910..G)
17.5 Nm
Material
Housing
PBT VALOX 325M
Thread (G8910..G)
Nickel-plated brass
Front
PBT VALOX 325M
Back
PBT VALOX 325M
Cable type
Grey PVC, oil proof
4 x 34 mm
2
Cable length
1.5 m
Weight
G 8910 1101
40 g
G 8910 1101 G
60 g
G 8910 1101
Du line
Fieldbus
Installationbus
2
Specifications are subject to change without notice (28.09.99)
Dupline
is a registered trademark. A product of the CARLO GAVAZZI Group
G 8910 1101, G 8910 1101 G
Mode of Operation
The G 8910 1101 (G) is an
ordinary magnetic proximity
switch, but with built-in Dup-
line
transmitter.
Once a magnet is brought
within sensing distance of the
magnetic proximity switch,
the channel in question is ac-
tivated.
When the distance between
magnet and transmitter ex-
ceeds 30 mm, the channel in
question is deactivated.
Several transmitters coded to
the same channel may be
used within an application. In
this case the channel turns
ON if one of the connected
magnetic proximity switches
is activated.
It is necessary to use the wire
adapter box, ADAPT 1605,
together with the program-
ming unit, GAP 1605, in order
to program the channel.
Note:
After programming, the white,
black and blue wires must be
connected to Dupline
ground.
Operation Diagram
Dupline
carrier
Sensor activation
Transmission
Wiring Diagram
Channel Programming
Dimensions
Additional Information
Scope of supply
G 8910 1101 supplied with magnet type 1G8910 1101
G 8910 1101 G supplied with magnet type 1G8910 1101G
Accessories
Magnet
1G8910 1101
Magnet with thread
1G8910 1101G
Programming adapter box
ADAPT 1605
G
G
S: Signal wire
PDF 
ZIP