Du line
Fieldbus
Installationbus
Specifications are subject to change without notice (28.09.99)
1
Dupline
is a registered trademark. A product of the CARLO GAVAZZI Group
Product Description
Ordering Key
Type: Dupline
No. of channels
Output type
Power supply
Receiver for Digital Signals
Types GAD 1111, GAD 1213
1- or 2-channel receiver
Galvanically separated SPDT relay outputs
Load: 1 x 10 A/250 VAC
2 x 10 A/250 VAC
D-housing
Plug-in type module
LED-indications for supply, outputs and
Dupline carrier
AC or DC power supply
Channel coding by GAP 1605
Dupline
receiver.
SPDT relay outputs for con-
Type Selection
Supply
Ordering no.
Ordering no.
1 channel
2 channels
10 A/250 VAC
10 A/250 VAC
24 VAC
GAD 1111 024
GAD 1213 024
115 VAC
GAD 1111 115
GAD 1213 115
230 VAC
GAD 1111 230
GAD 1213 230
10 to 30 VDC
GAD 1111 800
15 to 30 VDC
GAD 1213 824
trol of 1 or 2 loads of up to 250
VAC/10 A.
Output Specifications
GAD 1111 ...
GAD 1213 ...
(1 channel)
(2 channels)
Outputs
1 SPDT relay
2 SPDT relays
Isolated in groups of
1 x 1
2 x 1
Contact ratings (AgCdO)
(micro gap)
(micro gap)
Resistive loads
AC 1
10 A/250 VAC (2500 VA)
10 A/250 VAC (2500 VA)
DC 1
1 A/250 VDC (250 W)
1 A/250 VDC (250 W)
or
10 A/25 VDC (250 W)
10 A/25 VDC (250 W)
Inductive loads
AC 15
2.5 A/230 VAC
2.5 A/230 VAC
DC 13
5 A/24 VDC
5 A/24 VDC
Mechanical lifetime
30 x 10
6
operations
30 x 10
6
operations
Electrical lifetime
(at max load)
AC 1
2.5 x 10
5
operations
2.5 x 10
5
operations
Operating frequency
7200 operations/h
7200 operations/h
Dielectric voltage
Outputs - Dupline
2 kVAC (rms)
2 kVAC (rms)
Response time
1 pulse train
1 pulse train
GAD 1213 024
Du line
Fieldbus
Installationbus
2
Specifications are subject to change without notice (28.09.99)
Dupline
is a registered trademark. A product of the CARLO GAVAZZI Group
Output OFF delay
upon loss of Dupline
carrier
20 ms
Power ON delay
typ. 2 s
Indication for
Supply ON
LED, green
Output ON
LED, red (one per output)
Dupline
carrier
LED, yellow
Environment
Degree of protection
IP 20
Pollution degree
3 (IEC 60664)
Operating temperature
-20 to +50C (-4 to +122F)
Storage temperature
-50 to +85C (-58 to +185F)
Humidity (non-condensing)
20 to 80%
Mechanical resistance
Shock
15 G (11 ms)
Vibration
2 G (6 to 55 Hz)
Dimensions
Material
(see Technical information)
D-Housing
Weight
AC types
200 g
DC types
125 g
GAD 1111, GAD 1213
Supply Specifications
Power supply AC types
Overvoltage cat. III (IEC60664)
Rated operational voltage
through pins A1 & A2 230
230 VAC 15% (IEC 60038)
115
115 VAC 15% (IEC 60038)
024
24 VAC 15%
Frequency
45 to 65 Hz
Voltage interruption
40 ms
Rated operational power
GAD 1111 024/115/230 typ. 3.0 VA
GAD 1213 024/115/230
typ. 3.5 VA
Rated impulse withstand
voltage
230 4 kV
115
2.5 kV
024 800
V
Dielectric voltage
Supply - Dupline
2 kVAC (rms)
Supply - Outputs
2 kVAC (rms)
Power supply DC types
Overvoltage cat. III (IEC60664)
Operational voltage
through pins A1 & A2 800
10 to 30 VDC
824
15 to 30 VDC
Ripple
3 V
Reverse-polarity protection
Yes
Rated operational current
GAD 1111 800
120 mA
GAD 1213 824
150 mA
Inrush current
1 A
Rated impulse withstand
voltage
800 V
Dielectric voltage
Supply - Dupline
200 VAC (rms)
Supply - Outputs
2 kVAC (rms)
General Specifications
Mode of Operation
1-channel receiver with
change-over contact output
The output is coded by
means of the code program-
mer GAP 1605.
The output is normally OFF.
When a transmitter coded to
the selected channel is acti-
vated, the output turns on
and remains on until the
respective channel becomes
deactivated. The default set-
ting of the module is such that
upon loss of Dupline
carrier
the out-put goes off.
2-channel receiver with two
change-over contact outputs
Each output may be coded
individually by means of the
code programmer GAP 1605.
For details, please refer to
datasheet on GAP 1605.
The outputs are normally off.
When a transmitter coded to
the selected channel is ac-
tivated, the output turns on
and remains on until the re-
spective channel becomes
deactivated. The default set-
ting of the module is such that
upon loss of Dupline
carrier
the output goes off.
For changing the default set-
ting, please refer to the data-
sheet on GAP 1605.
Operation Diagram
Dupline
carrier
Transmission on channel 1
Output 1 (pins 4 & 7)
Transmission on channel 2
Power supply
Output 2 (pins 5 & 8)
Du line
Fieldbus
Installationbus
Specifications are subject to change without notice (28.09.99)
3
Dupline
is a registered trademark. A product of the CARLO GAVAZZI Group
GAD 1111, GAD 1213
Wiring Diagrams
2 channels GAD 1213 024/115/230
AC supply
1 channel GAD 1111 024/115/230
AC supply
AC supply
AC supply
V
DD
in/out
Output 1
Output 2
V
DD
in/out
S: signal wire
1 channel GAD 1111 800
DC supply
2 channels GAD 1213 824
DC supply
Output 1
Output 2
Accessories
Socket
D 411
Socket cover
BB 5
Hold down spring
HF
Front mounting bezel
FRS 3
DIN-rail for D 411
FMD 411
For further information, see "Accessories".
DC supply
+ -
DC supply
+
-
PDF 
ZIP