Specifications are subject to change without notice (26.10.99)
1
Timers
Multi time range, asymmetri-
cal ON/OFF one-shot recycler
with 6 selectable time ranges
from 0.1 s up to 10 hours. For
Housing
Type/function
Output
Power supply
Mounting
Output
Time range
Supply:
24 VAC/DC & 230 VAC
For DIN -rail
SPDT
0.1 s - 10 h
H 213 156 230
Basic electrical insulation
250 VAC (rms)
(contact/electronics)
Contact ratings (AgCdO)
(micro gap)
Resistive loads
AC 1
5 A/230 VAC (1200 VA)
DC 1
5 A/24 VDC (120 W)
Mechanical life
10 x 10
6
operations
Electrical life (at max. load)
AC 1
1 x 10
5
operations
Operating frequency
7200 operations/h
Insulation voltages
Rated insulation voltage
2.0 kVAC (rms) (cont./elec.)
Time ranges
T1
T2
1 - 10 m
0.1 s - 1 s
10 - 100 m
1 s - 10 s
1 - 10 h
0.1 m - 1 m
1 m - 10 m
0.1 h - 1 h
1 h - 10 h
Time range accuracy
-5 to +15%
min. actual time
min.
set time
Repeatability deviation
1%
Time variation
Within rated power supply
0.05%/V
and ambient temperature
0.2%/C
Reset
Power supply interruption
Relay on: > 200 ms
Relay off: > 1.5 s
Reversion of relay
Interconnect term. 2 & 21
One-shot function
Interconnect term. 1 & 21
Output
SPDT relay
use in many applications such
as lubricating machines or
switching on or off a load.
3 functions:
- Asym. recycler (OFF first)
- Asym. recycler (ON first)
- One-shot timer
Time ranges: 0.1 s to 10 h
Automatic start
Knob-adjustable time within range
Oscillator-controlled time circuit
Repeatability deviation:
1%
Output: 5 A SPDT relay
For mounting on DIN-rail in accordance with
DIN/EN 50 022
H2 -housing
LED-indication for relay and power supply on
AC and DC power supply
Asymmetrical Multi Recycler
Type H 213
Ordering Key
Product Description
Type Selection
Time Specifications
Output Specifications
H 213 156 230
2
Specifications are subject to change without notice (26.10.99)
H 213
Wiring Diagram
Power-on time
200 ms
Power-off delay
relay on:
200 ms
Indication for
Power supply ON
LED, green
Output ON
LED, red
Environment
IP 20 B/front IP 40 D
Pollution degree
3 (IEC 60664)
Operating temperature
-20 to +50C (-4 to +122F)
Storage temperature
-50 to +85C (-58 to +185F)
Weight
100 g
Power supply AC types
Installation cat. III (IEC 60664)
Rated operational voltage
through term. 21 & 22
230
230 VAC 15%, 45-65 Hz
or term. 21 & 3
24 VAC +15/-10%, 45-65 Hz
Drop-out tolerance
40 ms
Rated insulation voltage
None
Rated transient protection volt. 4 kV (1.2/50 s)
(line/neutral)
Power supply DC type
Installation cat. III (IEC 60664)
Rated operational voltage
through term. 21 & 3
230
24 VDC +15/-10% (term. 21: +)
Rated insulation voltage
None
Rated transient protection volt. 800 V (1.2/50 s)
Consumption
AC supply
30 mA @ 50 Hz/
40 mA @ 60 Hz
DC supply
1 W
Mode of Operation
Function 1
Asymmetrical recycler
OFF-time period first
No connection between the
terminals. The time period
begins when power supply is
applied.
At the end of the first set time
period, the relay operates.
At the end of the second set
time period, the relay releases.
This sequence continues with
unequal OFF- and ON-time
periods, until power supply is
interrupted.
Function 2
Asymmetrical recycler
ON-time period first
S2 is connected. The relay
operates and the time period
starts when power supply is
applied.
At the end of the first set time
period, the relay releases.
At the end of the second set
time period, the relay oper-
ates again.
This sequence continues with
unequal ON- and OFF-time
periods until power supply is
interrupted.
Function 3
One-shot timer
S1 is connected. The time
period begins when power
supply is applied.
At the end of the first set time
period, the relay operates.
At the end of the second set
time period, the relay relea-
ses.
This sequence is repeated
when power supply has been
interrupted and is reapplied.
Operation Diagram
Accessories
For further information refer to
"Accessories".
For other AC/DC voltages
refer to "General Information".
Time Setting
Knob-adjustable on relative
scale (1-10).
Left knob on housing:
Selection of time range
(seconds, minutes, hours).
Right knob on housing:
Time range multiplicator x 0.1
or x1.
Power supply on
Function 1: Relay on
Function 2 (S2): Relay on
Function 3 (S1): Relay on
Power supply
24 VAC/DC
Function
Power supply - 230 VAC
Supply Specifications
General Specifications
PDF 
ZIP