Specifications are subject to change without notice (20.08.01)
1
Type
Housing style
Housing size
Housing material
Housing length
Detection principle
Sensing distance
Output type
Output configuration
Types IA, M12
Analogue Voltage Output, Nickel-plated Brass Housing
Proximity Sensors Inductive
Nickel-plated brass housing
Housing diameter: 12 mm
Sensing distance: 0.3 - 5 mm, 0.3 - 3 mm
Power supply: 17/18 to 30 VDC
Output: 0-10 V
Protection degree IP67
2 m PVC cable
Product Description
Inductive proximity sensor
with analogue 0-10 or 1-10 V
voltage output. The analogue
signal can be directly con-
nected to measuring sys-
tems. Nickel-plated brass
housing, M12. Connection
with 2 m PVC cable.
Type Selection
Detecting Output
Housing
Connection
Ordering
no.
range
voltage
dimensions
Analogue Voltage Output, PNP
0.3 - 5.0 mm
0-10 V
M12
Cable, 2 m
IA 12 ASC 05 AK-K
0.3 - 3.0 mm
1)
1-10 V
M12
Cable, 2 m
IA 12 ALC 03 AK-K
1)
For flush mounting in metal
Specifications
Rated operational volt. (U
B
)
IA 12 ASC 05 AK-K
17 to 30 VDC (ripple included)
IA 12 ALC 03 AK-K
18 to 30 VDC (ripple included)
Ripple
10%
Output voltage
IA 12 ASC 05 AK-K
0 to 10 V
IA 12 ALC 03 AK-K
1 to 10 V
No-load supply current (I
o
)
IA 12 ASC 05 AK-K
< 22 mA
IA 12 ALC 03 AK-K
< 20 mA
Load
IA 12 ASC 05 AK-K
> 300
IA 12 ALC 03 AK-K
> 300
Detecting range
IA 12 ASC 05 AK-K
0.3 - 5 mm
IA 12 ALC 03 AK-K
0.3 - 3 mm
Linearity error
IA 12 ASC 05 AK-K
< 3%
IA 12 ALC 03 AK-K
< 5%
Temperature drift
IA 12 ASC 05 AK-K
< 5%
IA 12 ALC 03 AK-K
< 10%
Ambient temperature
Operating
IA 12 ASC 05 AK-K
0 to +70C (32 to +158F)
IA 12 ALC 03 AK-K
-10 to +70C (14 to +158F)
Storage
-30 to +75C (-22 to +167F)
Degree of protection
IP 67 (Nema 1, 3, 4, 6, 13)
Housing material
Nickel-plated brass
CE-marking
Yes
Connection
Cable
2 m, PVC, AWG 24
Ordering Key
IA 12 ASC 05 AK-K
2
Specifications are subject to change without notice (20.08.01)
IA M8, 12, 18, 30
IA 12 ASC 05 AK-K
IA 12 ALC 03 AK-K
Dimensions
M12 x 1
40
50
M12 x 1
70
80
Preliminar
y
Wiring Diagram
+
-
1 BN
3 BU
2 BK
Installation Hints
Relief of cable strain
Protection of the sensing face
Switch mounted on mobile carrier
To avoid interference from inductive voltage/
current peaks, separate the prox. switch pow-
er cables from any other power cables, e.g.
motor, contactor or solenoid cables
Incorrect
Correct
The cable should not be pulled
A proximity switch should not serve as
mechanical stop
Any repetitive flexing of the
cable should be avoided
PDF 
ZIP