Specifications are subject to change without notice
1
Power supply unit for general purpose
Stabilized output with short-circuit protection
Stabilized and non-stabilized DC voltage outputs
4kV input/output insulation
For DIN-rail mounting
Degree of protection: IP 40
Product Description
Power supply unit for general
purpose with DC inputs and
stabilized/non-stabilized DC
voltage outputs. The housing
is for DIN-rail mounting and
ensures a degree of protec-
tion of IP 40.
Accessories
Power Supply Unit, AC/DC
Type PSU-DIN
Type Selection
Power supply
A:
24 VAC, -15% +10%,
50/60 Hz
1)
B:
48 VAC, -15% +10%,
50/60 Hz
1)
C:
115 VAC, -15% +10%,
50/60 Hz
1)
D:
230 VAC, -15% +10%,
50/60 Hz (standard)
Output
5:
5 VDC stabilized,
12 VDC not stabilized
12:
12 VDC stabilized,
20 VDC not stabilized
24:
24 VDC stabilized,
30 VDC not stabilized
Rated voltages (DC)
Max. 200 mA:
5 VDC stabilized
12 VDC not stabilized
Max. 100 mA:
12 VDC stabilized
20 VDC not stabilized
Max. 50 mA:
24 VDC stabilized
30 VDC not stabilized
Ripple
Stabilized output
0.5 % Un @ max. current
Not stabilized output
10 % Un @ max. current
Stability
0.5 Un @ max. current
Protection
Short-circuit (stabilized out-
put only)
Insulation
4 kV between input and
output
Output Specifications
Input Specifications
Rated input
230 VAC, -15% +10%,
50/60 Hz (standard),
24 VAC, 48 VAC,115 VAC,
-15% +10%, 50/60 Hz,
(on request).
Power consumption
5.5 VA
Indication
Power-on
LED, red
Operating temperature
0 to 50C (32 to 122F)
(R.H. < 90% non-condensing)
Storage temperature
-10 to 60C (14 to 140F)
(R.H. < 90% non-condensing)
Insulation reference voltage
300 V
rms
to ground
Dielectric strength
4000 V
rms
for 1 minute
EMC
EN 50081-1, EN 50082-1
Safety standards
IEC 61010-1, EN 61010-1
Connector
Screw-type
Housing
Dimensions
3-DIN modules,
89 x 53.5 x 58.5 mm
Material
ABS,
self-extinguishing: UL 94 V-0
Degree of protection
IP 40
Weight
Approx 250 g
(packing included)
General Specifications
Model
Power supply
Output
Ordering Key
PSU-DIN D 5
1)
On request
PDF 
ZIP