Specifications are subject to change without notice
1
Power supply unit for general purpose
DC input
Stabilized AC voltage output
For DIN-rail mounting
Degree of protection: IP 40
Product Description
Model
Power supply
Ordering Key
Power supply unit for general
purpose with DC inputs and
stabilized AC voltage outputs.
The housing is for DIN-rail
mounting and ensures a
degree of protection of IP 40.
Accessories
Power Supply Unit, DC/AC
Type PSU-DIN
Type Selection
Power supply
E:
Input: 9 to 16 VDC
Output: 24 VAC
1)
F:
Input: 18 to 60 VDC
Output: 48 VAC
1)
G:
Input: 80 to 240 VDC
Output: 115 VAC (std)
Rated voltages (AC)
115 VAC stabilized,
min. 8 mA, max. 50 mA
48 VAC stabilized,
min. 20 mA, max. 125 mA
24 VAC stabilized,
min. 40 mA, max. 250 mA
The output is available only
if a minimum load is con-
nected. (See minimum cur-
rents above)
Stability
4% Un @ max. current
Protection
By fuses (5 x 20 mm):
115VAC:
160 mA T
48 VAC:
315 mA T
24 VAC:
1 A T
Waveform
Square
No. of equipment powered
2 x CVT-DIN,
1 x SPT-DIN,
1 x DI3-DIN,
1 x DI3-72,
1 x LDI3,
1 x SIU-PC 85,
1 x SIU-DIN 8585
1 x SIU-DIN RLY
Output Specifications
Input Specifications
Rated input
80 to 240 VDC
18 to 60 VDC
9 to 16 VDC
Power consumption
9 W
Operating temperature
0 to 50C (32 to 122F)
(R.H. < 90% non-condensing)
Storage temperature
-10 to 60C (14 to 140F)
(R.H. < 90% non-condensing)
Insulation reference voltage
300 V
rms
to ground
Insulation
Not insulated between input
and output; the insulation is
achieved by means of the
power supply (transformer)
input of the connected load
Dielectric strength
4000 V
rms
for 1 minute
EMC
EN 50081-1, EN 50082-1
Safety standards
IEC 61010-1, EN 61010-1
Connector
Screw-type
Housing
Dimensions
4-DIN modules,
89 x 71.5 x 58.5 mm
Material
ABS,
self-extinguishing: UL 94 V-0
Degree of protection
IP 40
Weight
Approx 190 g
(packing included)
General Specifications
1)
On request
PSU-DIN G
PDF 
ZIP