Specifications are subject to change without notice (10.10.02)
1
Proximity Magnetic Sensors
Rectangular Body, relay output SP.A.1 series
The SP.A.1.. magnetic sen-
sors allow to use two differ-
ent normally closed contacts:
the first one has low power
(5VA) and can be used as a
signal contact; the second
one has high power (100VA)
and can be used to drive
hard loads. The cable output
(ended by a connector) may
be 3x0.75 mm
2
, with the
ground connection fixed on
the case of the sensors by a
thin plate, or 4x0.75 mm
2
,
with the ground signal output
within the cable.
Type
Output Function
Reed Contact Type
Special Version
Product Description
Ordering Key
Type Selection
General specification
Electrical specifications
Power supply
24 Vdc
Output 1
Max 5 VA-0,5 A
Output 2
Max 100 VA- 4A
GND Connection
References
Within the output cable
SP.A.1/S2
Thin plate fixed on the case
SP.A.1/S3
Operating distance
Nominal operating point H
12 mm
Max operating point Hmax
14 mm
Switching OFF distance D1
45 7 mm
Switching ON distance D2
77 7 mm
Hysteresis of the switching points
8 5 mm
E1 and E2 output function
NC
Case
ABS class V0
Life expectancy
of E1 and E2 contacts
> 10
6
cycles without load
Electrical life expectancy
> 10
5
cycles (E1)
of E1 and E2 contacts
> 5 x 10
5
cycles (E2)
maximum allowable load
Protection degree
IP67
Operating temperature
-25 to +80 C
Output connection
PVC Cable
Weight
65 g
Plastic body
Relay output
1 NC high power output
1 NC signalling contact
24 Vdc power supply
Long life contacts
SP.A.1/S2
2
Specifications are subject to change without notice (10.10.02)
Rectangular Body, relay output SP.A.1 series
Dimensions
Wiring Diagrams
PDF 
ZIP