Specifications are subject to change without notice (10.10.02)
1
Proximity Magnetic Sensors
Rectangular Body, SP.B. series
The SP.B.2 and SP.B.2/2MT
models are shielded laterally
in order to reduce magnetic
interferences when mounted
side by side with other sen-
sors.
The fixing by means of two
nuts and washers, delivered
with the sensor, give good
reliability and greatly sempli-
fy the mounting procedure.
Type
Output Function
Reed Contact Type
Product Description
Ordering Key
Type Selection
General specification
Electrical specifications
Contacts
2
Max switching voltage
250 Vac
Max switching current
3 A
Max switching power
100 VA
Output Connection
Protection degree
Reference
Faston
IP 65
SP.B.2
Cable
IP 67
SP.B.2/2MT
Operating distance
Magnetic Units
CL.2
CL.3
CL.4
CL.10
CL.11
CL.18
CL.20/S1
CL.20/S3
CL.23
CL.31
SP.B.2 SP.B.2 /2MT
5 **
15 **
30 **
15 ***
30 ***
14 ***
30 ***
29 ***
18 ***
28 ***
* Left: operating distance; right: closing contact distance.
** The magnetic unit must be installed perpendicular to the switch longitudinal axis.
*** The magnetic unit must be installed perpendicular to the switch upper surface.
Output function
Bistable
Case
Plastic
Protection degree
IP67 or IP65
Operating temperature
-25 to +75 C
Block case
Plastic body
Side shielded
Easy and fast mounting procedure
SP.B.2
2
Specifications are subject to change without notice (10.10.02)
Rectangular Body, SP.B. series
Dimensions
Wiring Diagrams
PDF 
ZIP