Specifications are subject to change without notice (25.06.99)
1
For mounting on an 11-pole
circular socket. Used together
with the whole timer program
as supply where 12 VAC/DC
or 24 VDC is needed.
Supply
Regulated
Short-circuit
12 VAC/1 A
12 VDC/1 A
12 VDC/0.5 A
24 VAC/0.3 A
24 VDC/0.5 A
115 VAC
No
Protection
SS 110 115 12
SS 110 115 24*
230 VAC
No
Protection
SS 110 230 12
SS 110 230 24*
115 VAC
No
Protection
SS 120 115 12
SS 120 115 24
230 VAC
No
Protection
SS 120 230 12
SS 120 230 24
115 VAC
No
Protection
SS 130 115 12
SS 130 115 24**
230 VAC
No
Protection
SS 130 230 12
SS 130 230 24**
115 VAC
Yes
Protection
SS 140 115 12
SS 140 115 24**
230 VAC
Yes
Protection
SS 140 230 12
SS 140 230 24**
Note: *AC output 0.5 A
**DC output 0.3 A
Power supply AC types
Installation cat. III (IEC 60664)
Rated operational voltage
through pins 2 & 10
230
230 VAC 15%, 45 to 65 Hz
115
115 VAC 15%, 45 to 65 Hz
Dropout tolerance
40 ms
Rated insulation voltage
2.0 kVAC (rms) (supply/elec.)
Rated transient protection volt. 4 kV (1.2/50 ms) (line/neutral)
Indication for
Power supply ON
LED, green
Environment
IP 20 B
Pollution degree
2 (IEC 60664)
Operating temperature
-20 to +50C (-4 to +122F)
Storage temperature
-50 to +85C (-58 to +185F)
Weight
500 g
CE-marking
Yes
Note:
It is recommended always to use a hold down spring type HF.
Power supply
SS 110, SS 120, SS 130, SS 140
Power supply
SS 110, SS 120, SS 130, SS 140
-
DC output
~
General Accessories
Power Supply Units
Types SS 110, SS 120, SS 130, SS 140
Insulation: 4 kV rms/8 mm
LED-indication for power supply ON
S-housing
Power supply: 115 or 230 VAC
Output:
24 V/12 VAC, 0.5 to 1 A
24 V/12 VDC, 0.3 to 1 A
Product Description
Housing
Function
Type
Power supply
Output
Wiring Diagrams
AC output
+
Ordering Key
Type Selection
Supply Specifications
General Specifications
SS 110 230 12
PDF 
ZIP