Specifications are subject to change without notice (25.06.99)
1
Level Sensors
Food and beverage usage
2 Teflon isolated electrodes
For welding in container
Screw connection
Product Description
Ordering Key
VS 2
Level sensor for measuring
the level of conductive li-
quids, i.e. max./min. control
of charging for discharging.
The function is determined by
the amplifier relay used. The
sensors are delivered with
standard length electrodes -
these are cut off to suit the
application. For use in the
food and beverage industry.
Type
Housing material
Number of electrodes
Specifications
Ordering no.
2 electrodes
VS 2
Type Selection
Electrodes
Isolation
Teflon (PTFE)
Material
Stainless steel
Standard length
40 cm
Diameter
4 mm
Housing
Material
Top
Silumin
Probe head
Stainless steel
Connection
Screw terminals
Environment
Degree of protection
IP 54
Operating temperature
0 to +120C (+32 to +246 F)
Storage temperature
-25 to +130C (-13 to +266F)
Pressure
149 bar at 120C
Mode of Operation
The length of the electrodes
determines the levels which
will be detected and the
amplifier chosen determines
the function (see SV...,
S195/196, S1961, ELA, ELC
or ELD). If the container is
made of a conductive mate-
rial this can be used as com-
mon electrode.
Dimensions
Pipe thread ISO 228/1-G 3/4"
Type VS2
Conductive
PDF 
ZIP