Network Software for Energy Management
Type WattSoft2
The following configuration submenus are available:
programming of data protection PASSWORD;
selection of the NUMBER OF INSTRUMENTS
belonging to the network;
selection of the parameters belonging to the
INSTRUMENTS NETWORK;
selection of network WORKING MODE;
selection of ADDITIONAL VARIABLES (for TOTAL
DATA page only)
parameters of the DATA PRINTING mode.
The instruments network configuration menu
Selection of the following parameters:
instruments number (addresses);
type of instruments to be managed, e.g: SPT,
EM2, EM4, WM12, WM2, WM22, WM23, WM3,
WM24, WM4, etc.
network communication activation: ON / OFF;
type of electrical wiring system
Network Management of up to 12 instruments
Supervision of all the electrical variables managed
by the instruments
Graphic display of the main instrument's variables
Alarm management of the main instrument
Logging of the alarm history
Energy Management
WattSoft2 is a software
package that is able to figure
out the management of up to
12 mixed field hardware like:
SPT, EM2, EM4, WM12,
WM2, WM22, WM23, WM3,
WM24, WM4, etc. by means
of a MODBUS (RS485) com-
munication protocol.
Product Description
WATTSOFT2 is a Windows
95, 98, 2000, NT, ME and
XP network software for
energy management. This
virtual instrument combined
with the Carlo Gavazzi
hardware is a powerful
answer to the power and
energy parameter control
needs.
Ordering Key
WATTSOFT 2
Model
General Specifications
The set-up menus
1
WS2DS0703 Specifications are subject to change without notice
This flexible software can be config-
ured, by means of various setting
menus, to manage and display all the
measured electrical parameters.
The alarm set-points menu (only for the main
instrument):
Available parameters:
programming of instrument's tag;
list of instruments available in the network;
type of variables to be managed;
type of alarms;
SW alarm working mode (it can also be HW
depending on the type of instrument available
in the network);
A powerful alarm controlling every single mea-
sured variable is available for one instrument
among those belonging to the network.
General Specifications (cont.)
Other characteristics
Specifications are subject to change without notice WS2DS0703
2
Data pages
Main page (Total data)
The main page "TOTAL DATA" shows the execu-
tion status of the measurements, indicating the
list of all the variables with the measurement
results; giving the possibility to reset the total
consumed energies, the alarms, the hour counter.
TOTAL DATA also allows the operator to display
various graphs: energy, power, current, voltage
and power factor.
Single data page (Single data)
The "SINGLE DATA" page shows the details of a
group of up to six instruments, indicating: the
number of the displayed monitoring page, the
user name of the instrument "USERS"; the list of
all the variables with the measurement results.
WattSoft2
Total data graph
This monitoring page can be divided into four parts:
- on the top it is possible to select the instrument
whose graph and time base are to be displayed;
the alarm status of the system, the user name, the
wiring system of the instrument, the current date
and time;
- in the middle, the graph of up to four variables;
- on the right, all the info connected to the graph
(including zoom functions and selection between
automatic or manual axis range);
- at the bottom enabling of the graph manual printing
and possibility to go back to the TOTAL DATA page.
PDF 
ZIP