NEC's InGaAs PIN PD
MODULE WITH INTERNAL
PREAMPLIFIER FOR 10 Gb/s APPLICATIONS
NR3470MU-CC
InGaAs PIN PHOTO DIODE
INTERNAL GaAs TRANSIMPEDANCE PREAMPLIFIER
RECEIVER FOR 10 Gb/s TRANSMISSION
(STM-64, OC-192)
MINIMUM RECEIVER SENSITIVITY
P
r
= -17 dBm MAX
TRANSIMPEDANCE
Z
t
= 58 dB MIN
17-PIN MINI-BUTTERFLY PACKAGE WITH SINGLE
MODE FIBER
AC COUPLED-DIFFERENTIAL OUTPUT
WITH SC-UPC CONNECTOR
NEC's NR3470MU-CC is a 10 Gb/s PIN photo diode receiver
in a 17-pin mini-butterfly package with an internal preamplifier.
This module is ideal as a receiver for SONET OC-192 and
Synchronous Digital Hierarchy (SDH) systems, STM-64, and
ITU-T recommendations.
DESCRIPTION
California Eastern Laboratories
PART NUMBER
NR3470MU-CC
SYMBOLS
PARAMETERS AND CONDITIONS
UNITS
MIN
TYP
MAX
I
D
Dark Current
nA
5
10
S
Sensitivity
A/W
0.75
0.80
P
r
Minimum Receiver Sensitivity PRBS = 2
31
-1, BER = 10
-12
dBm
-18
-17
P
O
Overload
10.66 Gb/s, NRZ
dBm
0
+1
fc
Cut-off Frequency, R
L
= 50 , -3 dB
GHz
7.5
9.0
Z
t
Transimpedance, R
L
= 50
dB
58
60
V
SS
IC Supply Voltage
V
-5.46
-5.2
-4.94
I
SS
IC Supply Current
mA
90
130
ORL
Optical Return Loss
dB
27
ELECTRO-OPTICAL CHARACTERISTICS
(T
C
= 25C, V
SS
= -5.2 V, Vpin = +5 V, = 1550 nm, unless otherwise specified)
FEATURES
ABSOLUTE MAXIMUM RATINGS
1
(T
C
= 25C, unless otherwise specified)
SYMBOLS
PARAMETERS
UNITS
RATINGS
I
F
PIN PD Forward Current
mA
5
V
R
PIN PD Reverse Voltage
V
20
I
R
PIN PD Reverse Current
mA
2.0
V
SS
IC Supply Voltage
V
-6 to 0
T
C
Operating Case Temperature
C
-5 to +75
T
STG
Storage Temperature
C
-40 to +85
T
SLD
Lead Soldering
C
260
Temperature (10 s)
Note:
1. Operation in excess of any one of these parameters may result
in permanent damage.
PARAMETER
SPECIFICATION
UNIT
Mode Field Diameter
9.51
m
Cladding Diameter
1252
m
Maximum Cladding Noncircularity
2
%
Maximum Core/Cladding
Concentricity
1.6
%
Outer Diameter
0.90.1
mm
Cut-off Wavelength
1100 to 1270
nm
Minimum Fiber Bending Radius
30
mm
Fiber Length
1000 MIN
mm
Flammability
ULT1581 VW-1
OPTICAL FIBER CHARACTERISTICS
Fiber Length: 1000 mm MIN
SC-UPC Connector
352 mm
8.99
0.5 mm
NR3470MU-CC
ORDERING INFORMATION
PART NUMBER
AVAILABLE CONNECTOR
NR347OMU-CC-AZ*
With SC-UPC Connector
*NOTE:
Please refer to the last page of this data sheet, "Compliance
with EU Directives" for Pb-Free RoHS Compliance Infomation.
Life Support Applications
These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected
to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL
for all damages resulting from such improper use or sale.
A Business Partner of NEC Compound Semiconductor Devices, Ltd.
02/21/2003
OUTLINE DIMENSIONS
(Units in mm, 0.2 mm unless otherwise specified)
0.2
9.6
0.3
0.2
3.1
2-0.7
2-1.0
2.25
3.0
9.8
4.90.3
0.7 3.1
1.0
0.3
10.75
7.5
1.05
1
2
3
4
5
6
7
8
9
10
11
12 13 14 15 16
17
0.9
Optical Fiber (SMF)
Length: 1 m MIN
With SC Connector
17.85
2.0
3.950.15
0.15
2.12
0.5
0.6
9.8
2.25
3.3
3.8
3.85
3.4
0.20.1
PIN No.
SYMBOL FUNCTION
PIN No.
SYMBOL FUNCTION
PIN No.
SYMBOL
FUNCTION
1
GND
Ground (0.0V)
8
OUT
OUTPUT (INVERT)
15
NC
NC
2
Vpin
PIN PD CATHODE
9
GND
GROUND (0.0V)
16
NC
NC
3
NC
NC
10
OUT
OUTPUT (NON-INVERT)
17
GND
GROUND (0.0 V)
4
V
SS
POWER SUPPLY (-5.2V)
11
GND
GROUND (0.0V)
5
NC
NC
12
GND
GROUND (0.0V)
6
GND
GROUND (0.0V)
13
NC
NC
7
GND
GROUND (0.0V)
14
NC
NC
PIN CONNECTIONS
NR3470MU-CC
4590 Patrick Henry Drive
Santa Clara, CA 95054-1817
Telephone: (408) 919-2500
Facsimile: (408) 988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant
with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous
Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive
2003/11/EC Restriction on Penta and Octa BDE.
CEL Pb-free products have the same base part number with a suffix added. The suffix A indicates
that the device is Pb-free. The AZ suffix is used to designate devices containing Pb which are
exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals.
All devices with these suffixes meet the requirements of the RoHS directive.
This status is based on CEL's understanding of the EU Directives and knowledge of the materials that
go into its products as of the date of disclosure of this information.
Restricted Substance
per RoHS
Concentration Limit per RoHS
(values are not yet fixed)
Concentration contained
in CEL devices
-A
-AZ
Lead (Pb)
< 1000 PPM
Not Detected
(*)
Mercury
< 1000 PPM
Not Detected
Cadmium
< 100 PPM
Not Detected
Hexavalent Chromium
< 1000 PPM
Not Detected
PBB
< 1000 PPM
Not Detected
PBDE
< 1000 PPM
Not Detected
If you should have any additional questions regarding our devices and compliance to environmental
standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance
content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information
provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better
integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate
information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL
suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for
release.
In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to
customer on an annual basis.
See CEL Terms and Conditions for additional clarification of warranties and liability.
PDF 
ZIP