ChipFind - документация

Электронный компонент: CX90600

Скачать:  PDF   ZIP
Voice over IP
VoIP Phone
Distinguishing Features
ARM926EJ core @ 250 MHz
Supports up to 64MB of SDRAM
and 32MB of FLASH memory
Integrated LCD Controller
Enhanced voice codec
3-port Ethernet switch
Two 10-100 EPHYS with Auto
MDIX support
USB 2.0 host/device
PCI/PPI interface
High-speed UART
FlexIO programmable peripheral
interface
3DES/AES
Part Number CX90600
Description Integrated VoIP Solution for
IP Phone Applications
Integrated VoIP Solution for
IP Phone Applications
CX90600
Conexant's portfolio includes a comprehensive suite of semiconductor solutions
for broadband communications, enterprise networks, and the digital home.
The CX90600 device is a highly integrated VoIP single-chip device based on the
ARM926EJ core with integrated memory management unit (MMU), caches and
tightly coupled memory (TCM). Integrated peripherals such as the LCD controller,
keypad interface, 3-port Ethernet switch, and a codec significantly reduce the overall
bill of material (BOM) and design complexity of the IP Phone application, and enable
feature rich designs of Web-Phone, Video-Phone and other similar terminals.
A rich set of integrated peripheral interfaces includes USB 2.0 controller, high speed
UART, high performance PCI 2.3 interface, FlexIOTM, and several general purpose
I/Os, adds to the flexibility of this device. Customers can add features such as
Smart Card, flash drive, 802.11a/g WLAN and video cameras, allowing cost effective
implementation of advanced applications and a wide range of value-added options
including web browsing, billing and video conferencing.
The CX90600 performs a wide variety of speech coding schemes, such as G.711,
G.722, G.726 and G.729ab as well as telephony algorithms such as DTMF and dial
tone generation without the need for an external DSP device. The advanced voice
capabilities also include acoustic echo cancellation for full-duplex speakerphone. The
device's internal cryptographic engine performs the time-consuming cryptography
and authentication algorithms such as 128-bit AES (advanced encryption standard)
and 3DES (triple data encryption standard) tasks while freeing up processing
resources for other CPU intensive applications. The 3-port internal Ethernet Switch
with dual EPHYs provides support for both LAN and WAN connections and Power
over Ethernet, while the integrated system side device (SSD) provides an interface
to the Conexant's CX20493 SmartDAA line side device (LSD) enabling efficient
implementation of FXO support.
The CX90600 supports a variety of MMU and non-MMU based operating systems
such as Windows CE, Linux, Nucleus, and VxWorks, and others. Conexant provides
device drivers, network management, enhanced security, and the necessary APIs
for VoIP call processing based on the Nucleus and Linux operating system.
2005, Conexant Systems, Inc. All Rights Reserved. Conexant and the Conexant
logo are registered trademarks of Conexant Systems, Inc. All other trademarks
are owned by their respective owners. Although Conexant strives for accuracy
in all its publications, this material may contain errors or omissions and is
subject to change without notice.
ThIs maTerIal Is ProVIDeD as Is aND wIThouT
aNy exPress or ImPlIeD warraNTIes, INcluDINg merchaNTabIlITy, fITNess for a
ParTIcular PurPose aND NoN-INfrINgemeNT.
Conexant shall not be liable for any
special, indirect, incidental or consequential damages as a result of its use.
05-1606
Voice over IP
VoIP Phone
Features
ARM926EJ core @ 250 MHz
16 KB Instruction Cache
4 KB Data Cache
68 KB Instruction TCM (64 KB ROM and 4 KB RAM)
16 KB Data TCM (8 KB ROM and 8 KB RAM)
Supports up to 64 MB of external SDRAM
Supports up to 32 MB of external flash
Enhanced voice codec
Supports G.711, G.722, G.726 and G.729ab
DTMF encode and decode
DTMF relay
Dial tone generator
Hardware acoustic echo cancellation with 64ms span
Ethernet interface
3-port Ethernet switch
Two 10-100 EPHYS with Auto MDIX support
Enables power over Ethernet (802.3af)
LCD controller
Supports up to 640 x 480 16-bit TFT
STN (single/dual panel)
BitBLT engine with ROP
Unified memory architecture (UMA)
Integrated wideband codec
Integrated SSD for FXO support
Integrated LDO regulator controller
USB 2.0 host/device
PCI/PPI interface
High-speed UART
FlexIO programmable peripheral interface
Keypad interface supports up to 81 keys
Security features
Random number generator (RNG)
3DES and 128-bit key AES
CBC and ECB support
JTAG debug interface
Conexant Product Portfolio
The company's broad portfolio of semiconductor products also
includes client-side DSL and cable modem solutions, home
network processors, broadcast video encoders and decoders,
digital set-top box components and systems solutions, and
dial-up modems. In addition to its IEEE 802.11a/b/g-compliant
WLAN chipsets, software, and reference designs, Conexant
offers a suite of networking components that includes
solutions for applications based on HomePlug
SM
and HomePNATM.
Additional products include a complete line of asymmetric and
symmetric DSL central office solutions, which are used by service
providers worldwide to deliver broadband data, voice, and video
over copper telephone lines.
www.conexant.com
General Information:
U.S. and Canada: (888) 855-4562
International: (732) 345-7500
Headquarters
4000 MacArthur Blvd.
Newport Beach, CA 92660
Order# 102764A