THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX (630) 851-5040.
PHONE (630) 851-4722.
P R O D U C T D A T A S H E E T
Specifications subject to change without notice.
DATA SHEET #:
REV:
DATE:
PAGE
OF
Copyright 2001 Connor-Winfield all rights reserved.
a
CRYSTAL CONTROLLED OSCILLATORS
The Connor-Winfield HV54I-
Series is a 5.0V HCMOS,
hermetically sealed, Voltage
Controlled Crystal Oscillator
(VCXO). Based on a
fundamental crystal design the
HV54I-Series is designed for
PLL applications requiring low
jitter and tight frequency
stability.
1
2
HV54I-100 - 44.736 MHz
VCXO
SERIES
CENTER
FREQUENCY
5.0V OPERATION
LOW JITTER <1ps RMS
FREQUENCY STABILITY 20ppm
TEMPERATURE RANGE: 0 to 70C
HERMETICALLY SEALED PACKAGE
14 PIN 5.0V HCMOS VCXO
HV54I-100
HV54I-150
HV54I-200
Vx220
03
6/26/03
www.conwin.com
ORDERING INFORMATION
FEATURES
DESCRIPTION
CW 0107
HV54I-100
44.736M
Note:
1) Referenced to (Fo) measured with control voltage @ 2.50 Vdc, Inclusive of calibration, frequency
vs. temperature stability, supply voltage change, load change, shock and vibration, 15 years
aging.
2) Referenced to Fo at T=25C Positive Slope.
ABSOLUTE MAXIMUM RATINGS
TABLE 1.0
PARAMETER
UNITS
MINIMUM
NOMINAL MAXIMUM
UNITS
NOTE
Storage Temperature
-40
-
85
C
Supply Voltage
(Vcc)
-0.5
-
7
Vdc
Control Voltage
(Vc)
-0.5
-
7
Vdc
MODEL SPECIFICATIONS:
MODEL HV54I-100
TABLE 2.0
Frequency Range
(Fo)
20
-
100
MHz
Frequency Tolerance:
-20
-
20
ppm
1
Frequency Pullibility
50
-
-
ppm
2
MODEL HV54I-150
Frequency Range
(Fo)
20
-
100
MHz
Frequency Tolerance:
-20
-
20
ppm
1
Frequency Pullibility
75
-
-
ppm
2
MODEL HV54I-200
Frequency Range
(Fo)
20
-
60
MHz
Frequency Tolerance:
-20
-
20
ppm
1
Frequency Pullibility
100
-
-
ppm
2
OPERATING SPECIFICATIONS
TABLE 3.0
PARAMETER
MINIMUM
NOMINAL MAXIMUM
UNITS
NOTE
Operating Temperature Range
0
-
70
C
Supply Voltage
(Vcc)
4.75
5.0
5.25
Vdc
Supply Current
(Icc)
-
-
35
mA
Jitter (BW=10Hz to 20MHz)
-
-
5
ps rms
Jitter (BW=12kHz to 20MHz)
-
-
1
ps rms
SSB Phase Noise at 100Hz offset
-
-90
-
dBc/Hz
SSB Phase Noise at 1KHz offset
-
-100
-
dBc/Hz
SSB Phase Noise at 10KHz offset
-
-125
-
dBc/Hz
SSB Phase Noise at 100KHz offset
-
-135
-
dBc/Hz
FREQUENCY CONTROL
TABLE 4.0
PARAMETER
MINIMUM
NOMINAL MAXIMUM
UNITS
NOTE
Control Voltage Range
(Vc)
0.5
2.5
4.5
Vdc
Monotonic Linearity
-10
-
10
%
Input Impedance
-
50K
-
Ohm
Modulation Bandwidth (3dB)
15
-
-
KHz
HCMOS OUTPUT CHARACTERISTICS
TABLE 5.0
PARAMETER
MINIMUM
NOMINAL MAXIMUM
UNITS
NOTE
LOAD
-
-
50
pF
Voltage (High)
(Voh)
4.5
-
-
Vdc
(Low)
(Vol)
-
-
0.5
Vdc
Current (High)
(Ioh)
-16
-
-
mA
(Low)
(Ioh)
-
-
16
mA
Duty Cycle at 50% of Vcc
40
50
60
%
Rise / Fall Time 10% to 90%
-
-
3
nS
PACKAGE CHARACTERISTICS
TABLE 6.0
Package
Hermetically sealed, metal package.
THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX (630) 851-5040.
PHONE (630) 851-4722.
P R O D U C T D A T A S H E E T
Specifications subject to change without notice.
DATA SHEET #:
REV:
DATE:
PAGE
OF
Copyright 2001 Connor-Winfield all rights reserved.
a
CRYSTAL CONTROLLED OSCILLATORS
2
2
Vx220
03
6/26/03
www.conwin.com
PDF 
ZIP