The Series DPA solid state relays are
rated at 1.0 Amp RMS at ambient tem-
peratures up to 40C. The compact 16
pin DIP package is perfect for high den-
sity printed circuit boards. The DPA is
offered in your choice of either voltage
or current operated versions.
Manufactured in Crydoms ISO 9001
Certified facility for optimum product
performance and reliability.
Compact for High
Density PCB M ount
DC Control
SCR Output
Zero Cross Sw itching
FastFax Document No.101
SERIES DPA
Rev. 031602
PAGE 1 OF 1
Series DPA
1.0 Amp 120, 240 Vac 16 PIN DIP Package
M O D E L N O .
DPA4111
DPA4119
DPA6111
DPA6119
INPUT SPECIFICATIONS
Control Voltage Range
------
3.5-10 Vdc
------
3.5-10 Vdc
Control Current Range
10-35 mA
------
10-35 mA
------
Nominal Input Impedance
------
270 Ohm
------
270 Ohm
Typical Input Current @ 5 Vdc
------
15 mAdc
------
15 mAdc
Must Turn On Voltage
------
3.5 Vdc
------
3.5 Vdc
Must Turn On Current
10 mA
------
10 mA
------
Must Turn Off Voltage
------
1.0 Vdc
------
1.0 Vdc
Must Turn Off Current
1 mA
------
1 mA
------
OUTPUT SPECIFICATIONS
Operating Voltage Range (47-63 Hz)
20-140 Vrms
20-280 Vrms
Load Current Range
.025 - 1.0 Arms
Transient Over-Voltage
400 Vpk
600 Vpk
Max. Surge Current, (16.6ms)
30 Apk
Min. Off-State dv/dt @ Max. Rated Voltage
500 V/sec
Max.Off-State Leakage @ Rated Voltage
.01 mArms
Max. On-State Voltage Drop @ Rated Current
1.2 Vpk
Max.Turn-On Time
1/2 cycle
Max. Turn-Off TIme
1/2 cycle
Power Factor (Min.) WIth Max. Load
0.5
GENERAL SPECIFICATIONS
Dielectric Strength
3750 Vrms
Insulation Resistance (Min.) @ 500 Vdc
10
9
Ohm
Max. Capacitance, Input-Output
2.0 pF
Ambient Operating Temperature Range
-30 to 80C
Ambient Storage Temperature Range
-30 to 125C
M ECHANICAL SPECIFICATIONS
Weight: (typical)
.10 oz. (2.9 g)
Encapsulation:
Thermally Conductive Epoxy
CURRENT DERATING CURVE
.850
(21.6)
.19
(4.8)
.125
(3.2)
.025
(.6)
16
1
10
8
.70
(17.8)
.300
(7.6)
.60
(15.2)
.265
(6.7)
16
1
10
8
AC
AC
--
+
INPUT
OUTPUT
1.0
0.5
0.75
0.25
20
40
60
80
AMBIENT TEMPERATURE (C)
LOAD CURRENT (AMPS)
Max. Load Current vs. Temp.
PIN 8: AC LOAD
PIN 10: AC LOAD
PIN 16: +DC CONTROL
PIN 1: -DC CONTROL
GENERAL NOTES
All parameters at 25C unless otherwise specified.
Dielectric and insulation resistance are measured between input and output.
Off-State dv/dt test method per EIA/NARM standard RS-443.
2002 CRYDOM CORP, Specifications subject to change without notice.
All dimensions are in inches (millimeters)
APPROVALS
UL
E116950
CSA
LR81689
For recommended applications and more information contact:
USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540
Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154
Email: sales@crydom.com WEB SITE: http://www.crydom.com
UK: +44 (0)1202 365070 FAX +44 (0)1202 365090 Crydom International Ltd., 7 Cobham
Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: intsales@crydom.com.
GERMANY: +49 (0)180 3000 506
PDF 
ZIP