Switch Function
Single pole single throw
Switch Contact Resistance
25 milliohms maximum initial
50 milliohms maximum at end of life
Insulation Resistance
1,000 megohms minimum between
insulated terminals
Dielectric Strength
500 VDC minimum for 1 minute
Nonswitching Rating
100 mA or 50 VDC
Switch Capacitance
5 pF maximum between adjacent closed switches
Temperature Range
40C to +85C
Actuation Life
2,000 cycles switching 100 mA @ 20 VDC or
.1 mA @ 5 VDC (dry circuit)
Coplanarity
0.10mm (.004") maximum
Allowable Solder Time
IR and vapor phase - up to 60 seconds at 260C
Wave - up to 6 seconds @ 260C
Vibration
Per MIL-STD-202F, method 204D, condition B
(.065" or 15 G's between 10 HZ to 2K Hz) with no
contact inconsistencies greater than 1
microsecond.
Shock
Per MIL-STD-202F, method 213B, condition A
(50 G's) with no contact inconsistencies greater
than 1 microsecond.
Sealing
Bottom seal standard
Top tape seal optional
Marking
Special marking available consult CTS.
Surface mount
DIP Switch --
Auto Placeable
Features
Optimized Mechanical Features
Removable tape seal to withstand IR vapor phase
or wave soldering temperatures, board washing
Positive detent separate from contactor
Low profile and medium height actuators
available
SPST configurations, 2 through 10 and 12
positions
.686mm (.027") actuator travel
Gull-wing and "J" lead terminal configurations
Optimized Contact System
Redundant, wiping contact
Contactor does not deflect during actuation
Premium Materials
Gold plated contacts, solder coated terminals
Copper alloy contactor
High temperature materials (UL 94 V-0)
Electrical and Mechanical Specifications
Technical Data Sheet 4219C
C T S C O R P O R A T I O N /
M A N U F A C T U R E R O F R E L I A B L E E L E C T R O N I C C O M P O N E N T S
Series 219 SMT DIP
CTS SERIES 219 SMT CONTACT FEATURES
Part Number Code
For Ordering
219
XX
X
S
T
J
XX: Number of Positions
M: Medium Height Actuator
LP: Low Profile Actuator
T: Top Tape Seal
S: Bottom Seal (Standard)
J: "J" Bend
Terminal Optional
Gull Wing Terminals
Medium Height Actuator
Gull Wing Surface Mount Pad Layouts
"J" Lead Surface Mount Pad Layouts
"J" Lead Terminals
Low Profile Actuator
CTS 219XX
Order From:
CTS CORPORATION, RESISTOR/ELECTROCOMPONENTS / 1601 Mishawaka Street / Elkhart, Indiana 46514
North America Toll Free (888) 287-4690 / (219) 296-6700 / FAX: (219) 293-1240
http://www.ctscorp.com
CTS COMPONENTS TAIWAN, LTD. / 7, Central 6th Road (Chung Liu Road) / P.O. Box 26-20
Kaohsiung Export Processing Zone / Kaohsiung, Taiwan, Rep. of China
(07) 8216145 / FAX: (07) 8417642.8110040
11-99I
1. Value of Redundant (Bifurcated) Gold Plated Contacts: Redundancy
dramatically reduces the probability of contact failure while gold contact material
provides the highest environmental protection, IMPROVING RELIABILITY.
2. Value of Wiping Contact Action: Cleans contact area, IMPROVING RELIABILITY.
3. Value of Contactor Not Deflecting During Actuation: Constant contact pressure
eliminates overstressing contacts, IMPROVING RELIABILITY.
4. Value of Detent Separate from Contactor: Separate detent allows optimization
of nondeflecting contactor and detent designs, IMPROVING RELIABILITY.
DIMENSION:
MM
INCH
*
For "J" bend terminal configurations,
*
add the letter "J" to part number
*
ie 219-2MSTJ or 219-2LPSTJ.
"A"
No. of
Overall
Switch
Dimension
Sections
6.55/.258
2
9.09/.358
3
11.63/.458
4
14.17/.558
5
16.71/.658
6
19.25/.758
7
21.79/.858
8
24.33/.958
9
26.87/1.058
10
31.95/1.258
12
PDF 
ZIP