NOTES:
1. ALL DIMENSIONS ARE IN MILLIMETERS. ANGLES IN DEGREES.
2. COPLANARITY APPLIES TO THE EXPOSED PAD AS WELL AS THE TERMINALS. COPLANARITY SHALL NOT EXCEED 0.08mm.
3. WARPAGE SHALL NOT EXCEED 0.10mm.
4. PACKAGE LENGTH / PACKAGE WIDTH ARE CONSIDERED AS SPECIAL CHARACTERISTICS. (S)
NE
ND
N
L1
L
0.400
0.300
10
40
10
0.400
0.500
0.500
0.600
MIN.
PKG.
MAX.
NOM.
MIN.
OL
YMB
S
S
0.200 REF.
0.400 TYP.
4.900
D
E
k
k1
e
4.900
0.250
0.350
A1
A2
b
A
0.150
0.700
0.000
5.100
5.000
5.100
5.000
0.350
0.450
0.450
0.550
0.200
0.250
0.750
-- --
0.800
0.050
T4055-1
CODE
COMMON DIMENSIONS
D2
E2
3.20
MIN.
3.30
NOM.
3.20
MAX.
3.40
NOM.
3.30
MAX.
3.40
EXPOSED PAD VARIATONS
A
2
2
21-0159
PACKAGE OUTLINE, 40L THIN QFN
5x5x0.8mm BODY / 0.4mm LEAD PITCH
5. REFER TO JEDEC MO-220.
6. THE TERMINAL #1 IDENTIFIER AND TERMINAL NUMBERING CONVENTION SHALL CONFORM TO JESD 95-1 SPP-012.
DETAILS OF TERMINAL #1 IDENTIFIER ARE OPTIONAL, BUT MUST BE LOCATED WITHIN THE ZONE INDICATED. THE TERMINAL #1
7. ND AND NE REFER TO THE NUMBER OF TERMINALS ON EACH D AND E SIDE RESPECTIVELY.
IDENTIFIER MAY BE EITHER A MOLD OR MARKED FEATURE.
PDF 
ZIP