ChipFind - документация

Электронный компонент: DS9034PCI

Скачать:  PDF   ZIP
1 of 3
100102
FEATURES
Provides 10 years of battery backup power for
Nonvolatile (NV) SRAMs in the PowerCap
Module (PCM) package
Snaps directly onto a surface-mounted
PowerCap module base to form a complete
NV SRAM module
Attaches after module base has been surface-
mounted to protect lithium battery from the
high temperatures of reflow soldering
Maintains mechanical and electrical
connection with module base even during
severe shock and vibration stresses
Detachment feature allows easy removal
using a regular screwdriver
Periodic replacement allows NV SRAM
module life to be extended indefinitely
Optional industrial temperature range of
-40C to +85C, designated PCI
Compatible with these PowerCap module
bases:
DS1230YP/ABP/WP
DS1245YP/ABP/WP
DS1250YP/ABP/WP
DS1330YP/ABP/WP
DS1345YP/ABP/WP
DS1350YP/ABP/WP
PACKAGE OUTLINE
PIN DESCRIPTION
V
BAT
- +3V Battery Output
GND -
Ground
ABSOLUTE MAXIMUM RATINGS
Operating Temperature:
0C to +70C,
-40C to +85C for PCI parts
Storage Temperature:
-40C to +70C,
-40C to +85C for PCI parts
BATTERY CHARACTERISTICS
Nominal Voltage
3V
Nominal Capacity
130mAh
Chemistry Li(CF)
X
Data Retention Life 10
Years
(25C)
DESCRIPTION
The DS9034PC PowerCap is a snap-on lithium power source for NV SRAMs in Dallas Semiconductor's
directly surface-mountable PowerCap module base package. After a PowerCap module has been soldered
in place and cleaned, the DS9034PC PowerCap is snapped onto the base to form a complete NV SRAM
module. The PowerCap is keyed to prevent incorrect attachment and is designed to maintain mechanical
and electrical contact with its host module base even during severe mechanical shock and vibration. The
DS9034PC is easily removed by inserting a regular screwdriver into the detachment feature and prying
gently outward and upward to release the PowerCap from the module base.
DS9034PC/PCI
PowerCap
www.maxim-ic.com
GND
V
BAT
TOP VIEW
SIDE VIEW
DS9034PC/PCI
2 of 3
POWERCAP ATTACHMENT
POWERCAP REMOVAL
DS9034PC/PCI
3 of 3
DS9034PC PACKAGE DIMENSIONS
PKG
INCHES
DIM
MIN
NOM
MAX
A
0.845
0.850
0.855
B
0.955
0.960
0.965
C
0.210
0.215
0.220
D
0.065
0.070
0.075
E
0.065
0.070
0.075
ATTENTION: BATTERY COMPONENT
The DS9034PC contains a lithium battery. Do not short, ground or apply external voltages to the
electrical portions of this device. Do not expose to temperatures over +85
C. Do not subject this device to
any type of cleaning process. Store only in non-conductive containers. Failure to observe these
precautions may result in battery discharge or decreased battery life.