2-40
Dialight Corporation 1501 Route 34 South Farmingdale, NJ 07727 TEL: (732) 919-3119 FAX: (732) 751-5778 www.dialight.com
515-1020-806
8.69
[.342]
3.56
[.140]
C.L.
DIFFUSED
FRONT
SURFACES
1.52
[.060]
[ .076
.002]
3 PLCS
1.70
[.067]
TYP
1.45
[.057]
TYP
1.35
[.053]
2.34
[.092]
8.69
[.342]
15.09
[.592]
4.01
[.158]
RECOMMENDED SOLDER PAD/HOLES LAYOUT
DIRECTION
OF LIGHT
3.56
[.140]
6.35
[.250
.002]
6.35
[.250]
2.39
[.094]
6.35
.08
[.250
.003]
TYP, 2 PLCS
FRONT PANEL
Dimensions in mm [inches]
MicroLED SMT LEDs
for use with 515-1020-806
PART NO.
PAGE #
Recommended
597-3xx1-4xx
1-27 & 1-28
Alternatives
597-3xxx-4xx
1-27 & 1-28
597-5x11-4xx
1-27
597-5202-4xx
1-27
LED alternatives may not produce optimum light
output
Solder Pad/Holes layout shown is for single color
LEDs listed under "Recommended" category
Contact factory for other layouts.
Features
High transmissivity polycarbonate material
UL94V-0 compliance
ESD protection (circuit isolation from front panel)
Wide viewing angle
Arrays reduce insertion costs
Secures to PCB by press-fit
LED Data
For absolute maximum ratings and other electrical and optical
data on the recommended LEDs, refer to LED data sheets.
Dialight
Optopipe
Light Pipe Description
This light pipe's circular light emitting surfaces appear bright and have good optical isolation. The assembly is reliably
held in place by 3 press-fit pins located between the light pipe elements. This OptopipeTM functions as a through-the-case
indicator with a textured finish on the 4 light emitting surfaces that increases its viewing angle. The recommended light
sources are Dialight's 597 Series 1206 Type SMT LEDs. The LEDs are mounted in a straight line on a 0.250" pitch. Made
from black PBT, the light shield restricts light bleed between the elements. Both the water clear transmissive
polycarbonate light pipe material and the light shield are rated UL94-V0. The light pipe has a 35% oxygen index, and the
light shield has a 32% oxygen index.
Dialight can provide custom OptopipeTM solutions for your applications.
Operating/Storage Temperature
30C to +100C
3.56mm Round
Optopipe
TM
Optical Light Pipe Assembly
and Light Shield, 4 Array
NOTE: designed for
post-reflow
PC board insertion.
NEW
PDF 
ZIP