2-34
Dialight Corporation 1501 Route 34 South Farmingdale, NJ 07727 TEL: (732) 919-3119 FAX: (732) 751-5778 www.dialight.com
2.54mm Round
Optopipe
TM
Optical Light Pipe, 4 Array
515-1030
13.97
[.550]
13.97
[.550]
13.97
[.550]
13.97
[.550]
1.02
[.040]
TYP
1.60 [.063]
MOUNTING
PINS; (3)
PLCS
1.52
[.06]
13.97
[.550]
13.97
[.550]
6.99
[.275]
2.54 [.100]
TYP;
(4) PLACES
3.00
[.118]
REF
1.50
[.059]
10.16
[.400]
6.10
[.240]
1.32
[.052]
1.52
[.06]
C.L. SMT
LED
DIFFUSED
FRONT
SURFACES
44.45 [1.75]
REF
DIRECTION
OF LIGHT
12.19
[.48]
FRONT
PANEL
13.97
.08
[.550
.003]
TYP;(2) PLCS
[ .060
.002 ]
TYP;(3) PLCS
DIRECTION
OF LIGHT
Dimensions in mm [inches]
Alternative MicroLED SMT
LEDs
for use with 515-1030
PART NO.
PAGE #
597-5004-407 1-26
597-5112-407 1-26
597-5203-407 1-26
597-5213-407 1-26
597-5223-407 1-26
597-5312-407 1-26
597-5412-407 1-26
LED alternatives may not produce optimum
light output
Features
High transmissivity polycarbonate material
UL94V-0 compliance
ESD protection (circuit isolation from front panel)
Wide viewing angle
Arrays reduce insertion costs
Secures to PCB by press-fit
LED Data
For absolute maximum ratings and other electrical and optical
data on the recommended LEDs, refer to LED data sheets.
Dialight
Optopipe
Light Pipe Description
This 4 element light pipe is bright and has good optical isolation. The recommended LED is a SOT-23 Type, but
Dialight's 597 Series SMT LEDs in a 0603 package also works well. The SMT LEDs are mounted in a straight line under
the rear of the part on a 0.550" pitch. The light pipe is reliably held in place by 3 press-fit pins located between the light
pipe elements. The light pipe material is water clear transmissive polycarbonate rated UL94-V0, and has a 35% oxygen
index.
Dialight can provide custom OptopipeTM solutions for your applications.
Operating/Storage Temperature
30C to +100C
NOTE: designed for
post-reflow
PC board insertion.
NEW
PDF 
ZIP