2-35
Dialight Corporation 1501 Route 34 South Farmingdale, NJ 07727 TEL: (732) 919-3119 FAX: (732) 751-5778 www.dialight.com
2
3mm Round
Optopipe
TM
Optical Light Pipe, 2 Array
515-1071
8.69
[.342]
6.35
.08
[.250
.003]
2.34
[.092]
1.52
[.060]
TYP
1.70
[.067]
TYP
1.48
[.057]
TYP
1.35
[.053]
.076
.002
TYP: 2 PLCS
6.35
[.250]
3.17
[.125]
2.01
[.079]
TYP
2 PLCS
3.56
[.140]
2 PLCS
2.39
[.094]
4.19
[.165]
1.78
[.070]
3.56
[.140]
2 PLCS
6.35
[.250]
12.70
[.50]
C LED
L
C LED
L
12.95
[.51]
4.32
[.17]
3.56
[.14]
DIRECTION
OF LIGHT
Dimensions in mm [inches]
Recommended
MicroLED SMT LEDs
for use with 515-1071
PART NO.
COLOR
PAGE #
597-3111-4xx
AlGaAs Red
1-28
597-3201-4xx
Orange
1-28
597-3311-4xx
Green
1-28
597-3401-4xx
Yellow
1-28
Features
Compatible with Dialight's 515-1020 and 515-1069
Optopipe Light Pipe arrays
High transmissivity polycarbonate material
UL94V-0 compliance
ESD protection (circuit isolation from front panel)
Wide viewing angle
Arrays reduce insertion costs
Secures to PCB by press-fit
LED Data
For absolute maximum ratings and other
electrical and optical data on the recommended
LEDs, refer to LED data sheets.
Dialight
Optopipe
Light Pipe Description
This Optopipe'sTM circular light emitting surfaces appear bright and uniform in intensity. It is reliably held in place by 2
press-fit pins located on the right side of each of the 2 light pipe elements. This OptopipeTM functions as a through-the-
case indicator with a textured finish on the 2 light emitting surface that increases its viewing angle. The recommended
light sources are Dialight's 597 Series PLCC-2 or PLCC-4 Type SMT LEDs. The LEDs are mounted in a straight line on a
0.250" pitch. The light pipe material is water clear transmissive polycarbonate rated UL94-V0, and has a 35% oxygen
index.
Dialight can provide custom OptopipeTM solutions for your applications.
Operating/Storage Temperature
30C to +100C
NOTE: designed for
post-reflow
PC board insertion.
PDF 
ZIP