2-49
Dialight Corporation 1501 Route 34 South Farmingdale, NJ 07727 TEL: (732) 919-3119 FAX: (732) 751-5778 www.dialight.com
2
5x1.7mm Oval
Optopipe
TM
Optical Light Pipe, 5 Array
515-1091
11.18
[.44]
6.53
[.257]
1.68
[.066]
3.30
[.130]
3.56
[.140]
4.32
[.17]
2.03
[.08]
2.00
[.079]
MOUNTING PINS
TYP; 2 PLCS
37.85
[1.49]
33.02
[1.30]
26.67
[1.05]
15.72
[.619]
[ .076
.002]
TYP 2 PLCS
6.73
[.265]
4.72
[.186]
1.37
[.054]
4.39
[.173]
1.60
[.063]
1.45
[.057]
2.69
[.106]
1.04
[.041]
1.40
[.055]
4.39
[.173]
1.70
[.067]
49.02
[1.93]
11.00
[.433]
4 PLCS
5.08
[.200
.003]
TYP 5 PLCS
5.51
[.217]
3.81
[.150]
1.91
[.075]
33.00
[1.299]
2.79
[.11]
RECOMMENDED SOLDER PAD/HOLES LAYOUT
DIRECTION
OF LIGHT
DIRECTION
OF LIGHT
Dimensions in mm [inches]
MicroLED SMT LEDs
for use with 515-1091
PART NO.
PAGE #
Recommended
597-3111-5xx
1-30
597-3211-5xx
1-30
597-3301-5xx
1-30
597-3401-5xx
1-30
597-77x1-5xx
1-31
Alternatives
597-3111-4xx
1-28
597-3201-4xx
1-28
597-3311-4xx
1-28
597-3401-4xx
1-28
Solder Pad/Holes layout shown is for single color
LEDs listed under "Recommended LEDs".
Pads on far right are for recommended bi-colors.
Features
High transmissivity polycarbonate material
UL94V-0 compliance
ESD protection (circuit isolation from front panel)
Wide viewing angle
Arrays reduce insertion costs
Secures to PCB by press-fit
LED Data
For absolute maximum ratings and other electrical and optical
data on the recommended LEDs, refer to LED data sheets.
Dialight
Optopipe
Light Pipe Description
This OptopipeTM has 5 polished, elliptical elements, which protrude through the panel, and are back-angled 14. The
SMT LEDs are mounted in a straight line under the rear of the part on an 11mm pitch. Two press-fit pins hold the light pipe
securely to the PCB. The light pipe material is water clear transmissive polycarbonate rated UL94-V0, and has a 35%
oxygen index.
Dialight can provide custom OptopipeTM solutions for your applications.
Operating/Storage Temperature
30C to +100C
NOTE: designed for
post-reflow
PC board insertion.
NEW
PDF 
ZIP