1
) Valid, if leads are kept at ambient temperature at a distance of 10 mm from case
Gltig, wenn die Anschludrhte in 10 mm Abstand vom Gehuse auf Umgebungstemperatur gehalten werden
2
) Tested with pulses t
p
= 20 ms Gemessen mit 20 ms-Impulsen
3
) The ZPD 1 is a diode, operated in forward. The cathode, indicated by a ring, is to be connected to the negative pole.
Die ZPD 1 ist eine in Durchla betriebene Einzelchip-Diode.
Die durch den Ring gekennzeichnete Kathode ist mit dem Minuspol zu verbinden.
210
28.02.2002
ZPD 1...ZPD 75 (0.5 W)
Silicon-Planar-Zener-Diodes
Silizium-Planar-Zener-Dioden
Maximum power dissipation
0.5 W
Maximale Verlustleistung
Nominal Z-voltage Nominale Z-Spannung
1...75 V
Standard tolerance of Zener voltage
~ 5 % (E24)
Standard-Toleranz der Zener Spannung
Glass case
DO-35
Glasgehuse
SOD-27
Weight approx. Gewicht ca.
0.13 g
Dimensions / Mae in mm
Standard packaging taped in ammo pack
see page 16
Standard Lieferform gegurtet in Ammo-Pack
siehe Seite 16
Standard Zener voltage tolerance is graded to the international E 24 (~5%) standard.
Other voltage tolerances and higher Zener voltages on request.
Die Toleranz der Z-Spannung ist in der Standard-Ausfhrung gestuft nach der internationalen
Reihe E 24 (~5%). Andere Toleranzen oder hhere Arbeitsspannungen auf Anfrage.
Maximum ratings and Characteristics
Grenz- und Kennwerte
Power dissipation
T
A
= 50
/
C
P
tot
0.5 W
1
)
Verlustleistung
Operating junction temperature Sperrschichttemperatur
T
j
50...+175
/
C
Storage temperature Lagerungstemperatur
T
S
50...+175
/
C
Thermal resistance junction to ambient air
R
thA
< 0.3 K/mW
1
)
Wrmewiderstand Sperrschicht umgebende Luft
Zener voltages see table on next page Zener-Spannungen siehe Tabelle auf der nchsten Seite