256 Megabit Synchronous DRAM
DPSD16ME16TY5
ADVANCED INFORMATION
DESCRIPTION:
The PL-Stack series is a family of interchangeable memory modules. The 256 Megabit SDRAM is a member of this
family which utilizes the new and innovative space saving TSOP stacking technology. The modules are constructed
with 8 Meg x 16 SDRAMs.
This 128 Megabit based PL-Stack module, the
DPSD16ME16TY5 has been designed to fit in the same
footprint as the 8 Meg x 16 SDRAM TSOP monolithic and
128 Megabit SDRAM based family of PL-Stack modules.
This allows the memory board designer to upgrade the
memory in their products without redesigning the
memory board, thus saving time and money.
FEATURES:
Configuration Available:
16 Meg x 16 bit
(with two Chip Selects & two Clock Enables)
Clock Frequency:
66, 83, 100, 125, 133 MHz (max.)
[2]
PC100 and PC133 Compatible
3.3V Supply
LVTTL Compatible I/O
Four Bank Operation
Programmable Burst Type, Burst Length,
and CAS Latency
4096 Cycles / 64 ms
Auto and Self Refresh
Package: TSOP Leadless Stack
NOTES: [1] Available in Industrial Temperature Ranges Only.
[2] Available in Commercial Temperature Range Only.
PIN-OUT DIAGRAM
FUNCTIONAL BLOCK DIAGRAM
This document contains information on a product under consideration for
development at Dense-Pac Microsystems, Inc. Dense-Pac reserves the right
to change or discontinue information on this product without prior notice.
PIN NAMES
A0 - A11
Row Address:
A0 - A11
Column Address: A0 - A8
BA0, BA1
Bank Select Address
DQ0 - DQ15
Data In / Data Out
CAS
Column Address Strobes
RAS
Row Address Enables
WE
Data Write Enable
UDQM,
LDQM
Upper & Lower
Data Input/Output Mask
CKE0, CKE1
Clock Enables
CLK
System Clock
CS0-CS1
Chip Selects
V
CC
/V
SS
Power Supply/Ground
V
CCQ
/V
SSQ
Data Output Power/Ground
30A232-20
REV. A
1
DPSD16ME16TY5
Dense-Pac Microsystems, Inc.
ADVANCED INFORMATION
MECHANICAL DRAWING
Dense-Pac Microsystems, Inc.
7321 Lincoln Way, Garden Grove, California 92841-1431
(714) 898-0007 u (800) 642-4477 u FAX: (714) 897-1772 u http://www.dense-pac.com
PART NUMBER DESCRIPTION
NOTES: [1] Available in Industrial Temperature Ranges Only. See Note 4.
[2] Available in Commercial Temperature Range Only.
[3] Contact your sales representative for supplier and manufacturer codes.
[4] Delivery of all industrial temperature ranges are subject to availability of screened components.
Standard TSOP Pad Layout is acceptable. When possible,
use the Dense-Pac recommended footprint as shown. See
Application Note 53A001-00 for further information.
30A232-20
REV. A
2
PDF 
ZIP