52
Crystal oscillator
(Unit: mm)
5.3 Max.
0.2 Min.
0.25
7.62
2.54 Min.
7.62
# 4
# 1
# 5
# 8
13.7 Max.
6.6
100.0000 C
9357B
EPSON
2PH
No.
1
4
5
8
OE or ST
GND
OUT
V
DD
No.
1
7
8
14
OE or ST
GND
OUT
V
DD
90 to 105
90 to 105
0.25
External dimensions
Specifications (characteristics)
Pin terminal
Pin terminal
19.8 Max.
6.36
2.54 Min.
5.3 Max.
0.2
Min.
15.24
0.51
7.62
# 14
# 8
# 1
# 7
9357B
16.0000 C
EPSON
2PH
SG-8002DB series
SG-8002DC series
0.51
Note.
OE Pin (PT, PH, PC)
OE pin - "H" or "open" : Specified frequency output.
OE pin - "L" : Output is high impedance.
ST pin (ST, SH, SC)
ST pin - "H" or "open" : Specified frequency output.
ST pin - "L" : Output is low level (weak pull - down), oscillation stops.
PROGRAMMABLE HIGH-FREQUENCY CRYSTAL OSCILLATOR
SG-8002DB/ DC series
Item
Output frequency range
Power source
voltage
Temperature
range
Frequency stability
Current consumption
Output disable current
Standby current
Duty
High output voltage
Low output voltage
Output load
condition (fan out)
Output enable/disable input voltage
Output rise time
Output fall time
Oscillation start up time
Aging
Shock resistance
Symbol
f
0
V
DD
-GND
V
DD
T
STG
T
OPR
f/f
0
Iop
I
OE
I
ST
t
w
/t
V
OH
V
OL
N
C
L
V
IH
V
IL
t
TLH
t
THL
t
OSC
fa
S.R.
TTL
CMOS
CMOS level
TTL level
CMOS level
TTL level
Specifications 2
PT/ST
PH/SH
PC/SC
1.0000 MHz to 125.0000 MHz
-0.5 V to +7.0 V
5.0
V 0.5 V
3.3
0.3 V
-55 C to +125 C
-20 C to +70 C (-40 C to +85 C)
-40
C
to +85
C
B: 50 x
10
-6
C: 100 x
10
-6
M: 100 x
10
-6
45 mA Max.
28 mA Max.
30 mA Max.
16 mA Max.
--
40 % to 60 %
40 % to 60 %
--
V
DD
-0.4 V Min.
0.4 V Max.
5 TTL Max.
--
15 pF Max.
25 pF Max.
15 pF Max.
2.0 V Min.
0.7 x V
DD
Min.
0.8 V Max.
0.2 x V
DD
Max.
--
4 ns Max.
4 ns Max.
--
--
4 ns Max.
4 ns Max.
--
10 ms Max.
5 x 10
-6
/year Max.
20 x 10
-6
Max.
Remarks
Refer to page 33. "Frequency range"
2.7 V to 3.6 V: f
0
66.7 MHz(PC/SC)
Stored as bare product after unpacking
Refer to page 33."Frequency range"
B,C: -20 C to +70 C, M: -40 C to +85 C
No load condition, Max. frequency range
OE=GND(PT, PH, PC)
ST=GND(ST, SH, SC)
CMOS load: 1/2 V
DD
level
TTL load: 1.4 V level
I
OH
=-16 mA(PT /ST, PH /SH),-8 mA(PC /SC)
I
OL
= 16 mA(PT /ST, PH /SH), 8 mA(PC /SC)
Max. frequency and Max. operating voltage range
ST
_
, OE terminal
CMOS load: 20
%
80
%
V
DD
TTL load: 0.4 V
2.4 V
CMOS load: 80
%
20
%
V
DD
TTL load: 2.4 V
0.4 V
Time at minimum operating voltage to be 0 s
Ta= +25
C
, V
DD
= 5.0 V/3.3 V, First year
Three drops on a hard board from 750 mm or
excitation test with 29400 m/s
2
x 0.3 ms x
1/2sine wave in 3 directions
Max. supply voltage
Operating voltage
Storage temperature
Operating temperature
50 A Max.
Wide frequency output by PLL technology.
Quick delivery of samples and short lead mass production time.
Excellent environmental capability.
Output enable function (OE) and stand-by function (ST) can be used for low
current consumption applications.
Pin compatible with full size and half size.
8002 PROM Writer available to purchase.
Please contact EPSON or local sales representative.
Actual size
1 Operating temperature(-40 C to +85 C), the available frequency, duty and output load conditions, please refer to page 33.
2 PLL - PLL connection & Jitter specification, please refer to page 53, 54.
Checking possible by the Frequency Checking Program.
http://www.epsondevice.com/domcfg.nsf
Product number (please refer to page 1)
Q32 0 3 DBx x x x x x 0 0
Q 32 0 4 DCx x x x x x 0 0
SG-8002DB
SG-8002DC
1
1
1
1
PDF 
ZIP