ChipFind - документация

Электронный компонент: DC2013

Скачать:  PDF   ZIP
Microsoft Word - DC2013 Datasheet 12-12-02 - MU5001.doc
background image
TransDimension Inc. -- Proprietary
1

Description
TransDimension's DC2013 is a general purpose, single
port USB 2.0 High Speed Device controller with DMA
support that is the second in a family of integrated low-
cost, high-performance device controllers optimized
and specifically designed for embedded systems,
mobile communication, and consumer products. The
first in the same family is the DC2003 USB 2.0 High
Speed Device Controller with IDE interface.
The DC2013 is a non-PCI based controller with built-in
UTMI 1.0 compliant transceiver macro cell that is a
USB Specification Rev. 2.0 compliant high-speed
(480Mb/s) and full-speed (12Mb/s) device controller.
The DC2013 controller enables an embedded system
to function as a USB Device and to easily connect to
USB Hosts and Hubs. In addition to silicon,
development kits, USB Device Stack and interface
code to the DC2013 for numerous RTOS' are available
via our wholly owned subsidiary, SoftConnex
Technologies, Inc.
The DC2013 is optimized for cost, performance and
ease of development. It can be interfaced to CISC or
RISC microprocessors, microcontrollers, or digital
signal processors (DSPs) using a standard 8-bit data
bus and is ideal for providing USB device functions to a
wide range of applications including mobile devices,
Disk Drives, PDAs, Printers, Scanners, MP3 players
and Camcorders among others.
The complete solution including silicon and software
from TransDimension and SoftConnex offers the
advantages of shortened time-to-market, simplified
procurement and technical support from one source.










Features
High performance USB device controller for
embedded applications
USB Specification 2.0 compliant high-speed
(480Mb/s) and full-speed (12Mb/s) device
controller
Built-in UTMI 1.0 compliant transceiver
Includes both High Speed and Full Speed
terminations
Standard 8-bit microprocessor bus interface
2.5Kbyte of programmable FIFO for use with
endpoints
Supports control, bulk and interrupt USB transfer
types
General purpose DMA port functions as
Slave
Supports asynchronous multi-word DMA,
Single-word DMA or Synchronous DMA
Supports 8-bits or 16-bits bus width
Three general purpose endpoints and one default
control pipe
Low power operation, power management with
host suspend, remote wakeup, and power saving
modes
Programmable Vendor ID & Product ID
Built-in oscillator circuit (f=12 MHz or 24 MHz)
Evaluation/development kits available
Embedded RTOS software available for popular
microprocessors, RISC, CISC, and DSPs using
WinCE, Linux, VxWorks, Nucleus, Lynx, QNX,
pSOS, PowerTV, SMX, ThreadX, VRTX, ITRON,
Symbian OS and MS-DOS operating systems with
more in development
5V tolerant I/O's including VBUS, DMA & CPU
Single 3.3V power supply
0.35um CMOS process
64 pin QFP package
Datasheet
December, 2002
MU5001, Rev 1.2
DC2013
USB 2.0 High Speed Device Controller with DMA Interface
background image
TransDimension
Datasheet
DC2013
TransDimension Inc. -- Proprietary
2
Bus Configurations
DC2013
USB I/F
8bit
DMA Bus
UTM
SIE
FIFO
DM
A I/F
CPU I/F
Exclusive Bus Mode
Data
Processing
ASIC
8bit CPU Bus
General
CPU
DC2013
USB I/F
UTM
SIE
FIFO
DMA I/F
CPU I/F
Common Bus Mode
Data
Processing
ASIC
16bit Common Bus
General
CPU/DMAC
PDReq
PDAck
xPDWR,xPDRD
xC
S
xW
R
,
x
R
D
CA
xC
S
xW
R
H
,
x
W
R
L
x
R
D
H
,
x
RDL
CA
PD
R
e
q
PD
Ac
k
(*1) When DMA port functions as 16bit width, DC2013 uses the bus in common. The bus width has to be 8 bits in the case of accessing
registers.
background image
Datasheet
TransDimension
DC2013
TransDimension Inc. -- Proprietary
3
TransDimension USB2.0 High Speed Device Controller Family
Product
Name
Function Order
Number
Samples
DC2003 USB2.0 High Speed General Purpose Device
Controller with IDE interface (100-pin QFP)
TDDC2003-000C
Production parts in limited
quantities available Jan `03
DC2013 USB2.0 High Speed General Purpose Device
Controller with DMA interface (64-pin QFP)
TDDC2013-000C
Engineering Samples in limited
quantities available now

USB.IF Certified For Compliance











For additional information, contact your TransDimension Sales Representative:

INTERNET:
http://www.transdimension.com
E-MAIL: sales@transdimension.com, techsupport@transdimension.com

Headquarters:
TransDimension Inc., 2 Venture, Irvine, CA 92618, USA. Tel: +1(949) 727-2020, Fax: +1(949) 727-3232
Pete Todd, E-mail: ptodd@transdimension.com
Americas:
TransDimension Inc., 815 W. Market St., Suite 804, Louisville, KY 40202, USA. Tel: 502-992-3226, Fax: 949-727-3232
Larry Hayden, E-mail: lhayden@transdimension.com

Japan:
TransDimension Inc., OYA Bldg. 5, 3 Chome-9-6, Nishishinjuku, Shinjuku-ku, Tokyo, Japan. Tel: +81(3) 5308-7525, Fax: +81(3) 5308 7526
Masanori Sugane, E-mail: sugane@alto.ocn.ne.jp

Asia (excluding Japan): TransDimension Inc., 3 Ubi Ave 3, #05-01 Crocodile House, Singapore, 408857. Tel: +65 6743 9179, Fax +65 6741 4393
T. L. Nge, E-mail: tlnge@transdimension.com

Europe:
TransDimension Inc., 7 The Orchard, Hilton, Derbyshire, UK, DE65 5JF. Tel: +44 1283 730045, Fax: +44 1283 730651
Neil Huntingdon, E-mail: nhuntingdon@transdimension.com

WorldWide Reps.: See detailed listing for your area TransDimension representatives by viewing http://www.transdimension.com
________________________________________________________________________________________________________________________________________
THE DEVICE AND ITS DOCUMENTATION ARE PROVIDED "AS IS". TRANSDIMENSION HEREBY DISCLAIMS ALL WARRANTIES, EXPRESS, STATUTORY AND IMPLIED, APPLICABLE TO THE SOFTWARE AND ITS DOCUMENTATION
AND ANY RELATED PRODUCTS, INCLUDING, BUT NOT LIMITED TO, ANY WARRANTY OF MERCHANTABILITY, NON-INFRINGEMENT OR FITNESS FOR A PARTICULAR PURPOSE. TRANSDIMENSION ASSUMES NO LIABILITY
FOR ANY ACT OR OMISSION OF LICENSEE. IN NO EVENT SHALL TRANSDIMENSION BE LIABLE FOR DIRECT, SPECIAL, INDIRECT, INCIDENTAL, PUNITIVE, EXEMPLARY OR CONSEQUENTIAL DAMAGES, INCLUDING, WITHOUT
LIMITATION, LOSS OF PROFITS OR REVENUE, LOSS OF PRODUCTS, DATA OR ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF SUBSTITUTED EQUIPMENT OR PARTS, FACILITIES OR SERVICES, DOWN-TIME OR
LABOR COSTS, EVEN IF TRANSDIMENSION HAS BEEN ADVISED OF THE POSSIBILITY THEREOF. The device and any related products are not designed, authorized, or warranted to be suitable for use in life-support devices or systems or
other critical applications. Any such use and subsequent liabilities that may arise from such use are totally the responsibilities of the Licensee. Copyright 2002, TransDimension Inc., All rights reserved. All product names are trademarks or
registered trademarks of their respective owners. This document is subject to change without notice.

All Rights Reserved
Printed in U.S.
December 2002
MU5001- Rev. 1.2